[chirp_users] Tyt 9800 Importing Problems

K0LNY
Sun Aug 20 17:36:03 PDT 2023


Hi Ken,
The copy I have was exported from Chirp.
I find it almost impossible to find missing fields using notepad, my screenreader reads multiple commas as one.

Glenn

----- Original Message ----- 
From: Ken Hansen 
To: Discussion of CHIRP 
Sent: Sunday, August 20, 2023 6:40 PM
Subject: Re: [chirp_users] Tyt 9800 Importing Problems


If I follow your narrative correctly, you opened it up in Excel, two different versions of Libre Office, THEN you edited it in Notepad. (I think it was corrupted by one or both of the spreadsheet programs you opened it up in first, I doubt Notepad would corrupt it.)


Then you said you tried open office, and THEN you tried to import it into the chirp.


Take a good, serious look at the CSV file in notepad again, there are likely extraneous characters in the file that is messing up the import.


What is the source of the file? What is the file extension? (Sometimes this matters, doubtful in this case, but who knows?)


Can you get a fresh copy (export from chirp) and then edit it on Notepad?


Based on what you are describing, that's the best I can come up with.


Ken


  On Aug 20, 2023, at 18:19, K0LNY <glenn at ervin.email> wrote:


   
  Well I mentioned that I did edit it in notepad.
  But I sure don't know what would make it not importable in Chirp.
  Glenn
  ----- Original Message ----- 
  From: Ken Hansen 
  To: Discussion of CHIRP 
  Sent: Sunday, August 20, 2023 5:56 PM
  Subject: Re: [chirp_users] Tyt 9800 Importing Problems


  Why do you keep opening the CSV file in a spreadsheet? Granted it's easier to read in a spreadsheet, but somewhere along the line it seems your CSV file got corrupted. 


  Try opening the CSV file in notepad, it won't add anything to the file that might cause these problems.


  My suggestion:


  A) Start with a brand-new, fresh CSV file 
  B) Open the file in Notepad (you may have to right-click on the file and use "Open with..." to select Notepad
  C) Edit the file as you like, and save it to the exact same name if you can, if not, be sure to retain the file suffix (like .CSV)
  D) Try to import the updated file


  You could try importing the CSV file immediately after you export it - don't touch it at all - to ensure you are starting with a known-good file.


  Hope this helps,


  Ken, N2VIP


    On Aug 20, 2023, at 17:48, K0LNY <glenn at ervin.email> wrote:


     
    Hi All,
    I'm still working on my Tytera 9800.
    I have had trouble working on the CSV file of the 227 memories.
    My MS Office Excel seems to mess up the fields.
    For some reason, my LibreOffice Calc crashes when I open the CSV in there.
    I had a portable version of Libre Office, so I installed the full version, and that kept crashing too.
    I'm using windows 10.
    So I ran Dism with the repair switches, and that didn't find anything.
    So I ran SFC and that fixed a problem and I rebooted.
    I tried Libre Office again, and it keeps crashing.
    I fixed up the CSV in Notepad, making sure to not mess with the commas.
    But I need to get the data into Chirp to upload it to the radio.
    I installed Open Office, and opened it up in there, but the data does not past into Chirp.
    I tried to import the CSV file into Chirp, but it does not find it to be a file it can open.
    The error is:
    An error has occurred
    Unknown File Format
    Should Chirp be able to import a CSV file?
    I am using Chirp Next from a couple days ago.
    Thanks for any suggestions.
    Glenn

    A man with a clock always knows what time it is.
    A man with two clocks is never sure.
    -- A derivative of Segal's law
    _______________________________________________
    chirp_users mailing list
    chirp_users at intrepid.danplanet.com
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users
    This message was sent to Ken Hansen at ken at n2vip.org
    To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
    To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
    Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com


------------------------------------------------------------------------------


  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to K0LNY at glenn at ervin.email
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
  To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
  Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to Ken Hansen at ken at n2vip.org
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
  To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
  Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com


--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn at ervin.email
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230820/2f1438e9/attachment.html 


More information about the chirp_users mailing list