[chirp_users] Fix a CSV File

K0LNY_Glenn glenn at ervin.email
Thu Jun 9 19:49:23 PDT 2022


Hi Jim,
Well I put them back into the file you fixed, and there was a problem with 
zeros in some of the duplex columns, and some missing values in #87 that I 
copied from the previous line.
I uploaded it with no errors this time.
All of the channels I put in seem to be there, at least the talking channel 
dial says they are there.
Tomorrow I will see if the Tyt 9800 picks up my 6 meter transmissions, and 
I'll fill you in then on whether it was a success.
Glenn
----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Thursday, June 09, 2022 9:29 PM
Subject: Re: [chirp_users] Fix a CSV File


On Thu, Jun 9, 2022 at 7:19 PM K0LNY_Glenn <glenn at ervin.email> wrote:
>
> Hi Jim,
> Thanks, I had put the 88.5 values into the r-tone field, column G, so I
> don't know what happened there.

None of the rToneFreq fields had any values. It was the cToneFreq
fields that were populated. If both fields must be populated.

> On the values for the out of range, fields, if that is going to be a
> problem, how will I get 6 meter values in for the KG7D?

I don't know. The KG-UV6D driver doesn't support 6 meters frequencies
so they wouldn't be imported even if the entries were valid for the
KG-UV7D. I suppose you could use the OEM software or program them
manually using the radio's keypad.

> Thanks.

You are welcome.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn at ervin.email
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email 
chirp_users-owner at intrepid.danplanet.com 



More information about the chirp_users mailing list