[chirp_users] Roger beep on a per channel basis

[K0LNY_Glenn]

Hi Al,
Did you ever plug in a speaker microphone?
My UV5R is known for sticking inside after plugging in a speaker-mic and it will only transmit the microphone via the speaker microphone now.
I don't want to open it up to try and unstick the contact inside the jack.
Sounds like the trouble you are having.

Glenn
----- Original Message ----- 
From: Al Jones 
To: Discussion of CHIRP 
Sent: Monday, June 06, 2022 11:53 AM
Subject: Re: [chirp_users] Roger beep on a per channel basis


I don't see one Sam, the beep is in the setting part of the chirp menu which says it'll apply to all channels.  (( BTW, I wish we could! ))
//al


------ Original Message ------
>From "Sam Phillips" <killerbees113 at gmail.com>
To chirp_users at intrepid.danplanet.com
Date Mon 6 6 22 11:14:02
Subject [chirp_users] Roger beep on a per channel basis


  Is there anyway to put a Roger beep on certain channels but not others on the Baofeng UV-5R? I've looked and looked and only seen how to put a PTT-ID on per channel. Could there be a way to do it through developer options?
  Any help is appreciated,
  Sam


--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn at ervin.email
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220606/244e3266/attachment.html