[chirp_users] RaspberryPI

[K0LNY_Glenn]

Hi All,
Anyone here have any idea on why after installing Chirp on the Raspberrypi 
that I lost use of keyboard input?
The page suggests a command to ensure Chirp has access to the USB cable, and 
I wonder if that would cause it to not allow any other USB device.
When I doover SSH:
lsusb
the keyboard shows up.
The snap command was something like:
sudo snap connect chirp-snap:raw-usb

Thanks for any assistence.

Glenn
----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Tuesday, July 26, 2022 6:58 AM
Subject: Re: [chirp_users] RaspberryPI


On Mon, Jul 25, 2022 at 11:40 PM K0LNY_Glenn <glenn at ervin.email> wrote:
>
> Hi,
> Can Chirp be installed on a RaspberryPI, and if so, is there a script
> available for installing the dependencies?
> Thanks.
>
> Glenn

Hi Glenn,

Yes. I have attached my notes that I used for installing the CHIRP
Snap application on my Raspberry Pi model 3B. These notes were derived
from the information on this page:
https://snapcraft.io/install/chirp-snap/raspbian

I just updated my RPi 3 to have the new build released today: CHIRP
daily-20220726.

Jim KC9HI



--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn at ervin.email
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email 
chirp_users-owner at intrepid.danplanet.com