[chirp_users] Baofeng HP9+ won't read

[Nigel A. Gunn G8IFF/W8IFF]

There doesn't appear to be a Baofeng HP9+

> On 19/07/2022 18:22 EDT K0LNY_Glenn <glenn at ervin.email> wrote:
> 
>  
> Hi,
> I have a Baofeng HP 9+, and I'm using Chirp on an older Ubuntu live on a 
> thumb drive, that I've booted to before and used to program the same radios.
> I was just able to first read and write to my UV 5R with the same cable that 
> I'm trying to use on the 9+.
> I worked and worked on the connection, making sure it was tight into the 
> radio.
> I reset the radio with menu 40 and #1, which is a full reset, it went to 
> Chinese, and then I set it to English again, but it still won't read from 
> the radio.
> Does anyone have any ideas why it won't read?
> I'm pretty sure the 9+ uses the same cable as the UV5R.
> Thanks for any suggestions.
> 
> Glenn 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net