[chirp_users] CHIRP problem

A Hendrix logosscribe.productions at gmail.com
Sun Feb 20 13:18:10 PST 2022

Hi, Leilani.
I have a BTECH UV-5X3 and had some simple issues trying to program. When
you attached the cable to the radio, was the radio on or off? Is it on or
off when you get the error message? (I had to make sure it was off when I
plugged it in, then on when I tried to upload the radio data to CHIRP, and
if it asked me to turn it on or off I did that) Is the cable pushed all the
way into the radio? (not trying to be condescending...that was one of my
problems...the plugs have to be pushed in hard)
...hoped that helped...
 de A Hendrix KO4UMY

On Sat, Feb 19, 2022 at 2:59 PM Leilani Mariotti <KA8WRL at writeme.com> wrote:

> I am trying to download CHIRP onto my Baofeng UV-5X3 radio.
> I have the latest CHIRP, the cable is attached to the computer and radio.
> Here is the error code that I see when trying to do the initial from
> Radio:  CHIRP - An error had occurred  Error reading date from radio:  not
> the amount of date we want.  OK
> I need your help so I can program the radio.
> Thank you.
> HamWAF
> KA8WRL at writeme.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to AHendrix at logosscribe.productions at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220220/8941309a/attachment.html 

More information about the chirp_users mailing list