[chirp_users] New Daily Build

[Build System]

Greetings,

A new daily build of CHIRP is available.  This includes changes made
directly to the tree yesterday, and may include additional features,
bug fixes, and/or bugs.  If you are interested in trying it, grab it
from the following location:

  http://trac.chirp.danplanet.com/chirp_daily/daily-20220823


A list of the changes included in this build (since the last daily)
follows:

Changes for Build #696
[Ran Katz <rankatz at gmail.com>] [tg_uv2p] (revision 3) Inhibit keypad lock when in dual watch or crossmode. Fixes forth issue in #9939
Added logical tests to raise exception only on user changes to the relevant settings
(and not on "static" settings e.g. do to downloaded radio with such a configuration)
Also removed the explicit settings on error on both keyunlocked and rx_mode settings

[Jim Unroe <rock.unroe at gmail.com>] [RB26] Unable to Select Tones

Trying to set squelch tones was causing validation errors to pop up thus
preventing the user to edit tone values. This was caused by the way
CHIRP was programmed to keep various FRS, GMRS and PMR values valid.

This patch reworks how the driver validates Frequency, Mode and Power
selections.

Fixes #9982

[Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: Default to Wide Bandwidth

This patch sets the default Mode when programming a memory to FM.

Retevis RB17A, RB26, RT21 and RT76

Fixes #9998

[Jim Unroe <rock.unroe at gmail.com>] Driver Maintenance: Default to High Power Level

This patch sets the default Power level when programming a memory to High.

Retevis RB17A, RB26, RT21 and RT76

fixes #9997

[Jim Unroe <rock.unroe at gmail.com>] [RT76] Retevis RT76 doesn't support scanning

This patch removes the "Skip" column since it is not needed or used.

fixes #9996

[Jim Unroe <rock.unroe at gmail.com>] [RT29] Power Levels are Incorrectly Applied

This patch corrects the faulty operation of the Power setting for the
Retevis RT29_UHF and RT29_VHF radios.

fixes #9995