[chirp_users] chirp_users Digest, Vol 152, Issue 12

Wed Sep 8 12:45:13 PDT 2021

Ken,

That's not how it works.

If you have a FT-270 to loan, post that availability to
https://chirp.danplanet.com/issues/1099

The two duplicate requests were deleted because they were duplicates of the
first request.

A post saying you are volunteering a radio for a developer to use would NOT
be a duplicate, and it's one of TWO things that must happen before a
developer will undertake work on it.

Short answer, until someone volunteers a loaner radio, no one will do work
on this except in the unlikely occurrence that one of the volunteer
programer's happens to have one himself and wants to use CHIRP with it.

Consider this a request for a promise of a loaner radio, anyone willing to
do so, post a message to https://chirp.danplanet.com/issues/1099

Then wait for a volunteer to volunteer.

If you have the talents, consider becoming a volunteer programmer.

73

David N1EA
Only a mere user

On Fri, Aug 27, 2021, 11:17 Ken Hansen <ken at n2vip.org> wrote:

> It's an unanswered request from 8 years ago, and two duplicate requests
> were rejected a year later.
>
> It doesn't look like it's likely to happen - I don't see a request for a
> loaner radio, that a developer is going to take a look into what's
> involved, etc. AFAIK the FT-270 wasn't a big seller (compared to, say, the
> FT-60R) or the many permutations of Baofeng radios.
>
> Ken, N2VIP
>
> On Aug 27, 2021, at 08:42, Martin Cooper <mfncooper at gmail.com> wrote:
>
> 
> No need. There's already an issue for this radio:
>
> https://chirp.danplanet.com/issues/1099
>
> Martin.
> KD6YAM
>
> On Fri, Aug 27, 2021 at 4:27 AM Tony Ling <tonyg7txu at gmail.com> wrote:
>
>> You can raise is as an issue under new model here
>> https://chirp.danplanet.com/projects/chirp/issues/new
>> Tony G7TXU
>>
>> On Fri, 27 Aug 2021 at 00:26, Ken Hansen <ken at n2vip.org> wrote:
>>
>>> I suspect as soon as someone loans/donates a radio to a CHIRP programmer
>>> to work on support.
>>>
>>> Ken
>>>
>>> On Aug 26, 2021, at 18:10, Eric Chopin <echopin27 at gmail.com> wrote:
>>>
>>> 
>>> Yaesu FT270 H/H
>>>
>>> Greetings, so far I have used CHIRP with 100% success in programming
>>> many radios.
>>> What I REALLY need is being able to program the YAESU FT270 Hand Held.
>>> When is one of you brilliant guys going to update CHIRP with this radio?
>>>
>>> Thanks
>>> VE7ECJ
>>>
>>> On Sun, Aug 22, 2021 at 12:01 PM <
>>> chirp_users-request at intrepid.danplanet.com> wrote:
>>>
>>>> Send chirp_users mailing list submissions to
>>>>         chirp_users at intrepid.danplanet.com
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> or, via email, send a message with subject or body 'help' to
>>>>         chirp_users-request at intrepid.danplanet.com
>>>>
>>>> You can reach the person managing the list at
>>>>         chirp_users-owner at intrepid.danplanet.com
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of chirp_users digest..."
>>>>
>>>>
>>>> Today's Topics:
>>>>
>>>>    1. Re: UV5X Programming issue (White Ranger)
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>>
>>>> Message: 1
>>>> Date: Sat, 21 Aug 2021 14:33:09 -0500
>>>> From: White Ranger <cortchubby20007 at gmail.com>
>>>> Subject: Re: [chirp_users] UV5X Programming issue
>>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>>> Message-ID:
>>>>         <CAP+N95FGwe=
>>>> VRT21Yd+EiDSjhknL0j_xGhMZqD7PEJXniiT93Q at mail.gmail.com>
>>>> Content-Type: text/plain; charset="utf-8"
>>>>
>>>> Radio should be ON when up or downloading.
>>>> Remove the driver and cable program, reboot PC reload driver
>>>> SHOULD correct issue. If using aftermarket cable check to see contacts
>>>> are
>>>> CLEAN (*shiny) and fit TIGHTLY into the mike provisioning adapter (Mic
>>>> jack) DO NOT touch ANY buttons while programming. Worst case, prior to
>>>> programming RESET the radio to factory resets then load your amended
>>>> program.
>>>>
>>>> On Thu, Aug 19, 2021 at 2:03 PM Jim Unroe <rock.unroe at gmail.com> wrote:
>>>>
>>>> > Hi Eric,
>>>> >
>>>> > On Thu, Aug 19, 2021 at 12:47 PM Eric Chopin <echopin27 at gmail.com>
>>>> wrote:
>>>> > >
>>>> > > UV5XP....
>>>> > >     However to get CHIRP to see the radio either in the 'Download
>>>> from
>>>> > radio'
>>>> > >     or 'Upload to radio' ... with the cable plugged in to my PC or
>>>> my
>>>> > MAC, the
>>>> > >     radio must me switched OFF...then as I select 'Download or
>>>> upload'
>>>> > as I
>>>> > >     select 'OK' i must immediately switch ON my radio then CHIRP
>>>> sees it
>>>> > and
>>>> > >     proceeds. If I try to 'Download or upload' with the radio
>>>> already
>>>> > switched
>>>> > >     on I get the message 'The radio did not respond' as CHIRP
>>>> cannot see
>>>> > it
>>>> > >     connected.
>>>> > >     Any suggestions?
>>>> > >     Thanks
>>>> > >     VE7ECJ
>>>> >
>>>> > That sounds like a programming cable/driver issue. Also, to program
>>>> > that radio you must choose...
>>>> >
>>>> > Vendor: Radioddity
>>>> > Model: UV-5G
>>>> >
>>>> > Jim KC9HI
>>>> > _______________________________________________
>>>> > chirp_users mailing list
>>>> > chirp_users at intrepid.danplanet.com
>>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> > This message was sent to cortchubby20007 at gmail.com at
>>>> > cortchubby20007 at gmail.com
>>>> > To unsubscribe, send an email to
>>>> > chirp_users-unsubscribe at intrepid.danplanet.com
>>>> >
>>>> -------------- next part --------------
>>>> An HTML attachment was scrubbed...
>>>> URL:
>>>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html
>>>>
>>>> ------------------------------
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>> End of chirp_users Digest, Vol 152, Issue 12
>>>> ********************************************
>>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Ken Hansen at ken at n2vip.org
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Tony Ling at tonyg7txu at gmail.com
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Martin Cooper at mfncooper at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ken Hansen at ken at n2vip.org
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210908/e2e24d71/attachment.html 