[chirp_users] Fwd: chirp_users Digest, Vol 149, Issue 15

Steve Horning n0xvz.1 at gmail.com
Mon May 31 12:42:48 PDT 2021


Interesting.  My the programming in CHIRP for my UV-5R stores/saves the 
offsets, but CHIRP is not "doing the math" or storing/saving the offsets 
with the GT-5R.

 From what I'm seeing, it's on the software side, not the radio side.  
After downloading the GT-5R's memory after a complete reset, I enter 
programming info for the radio, save it, close and reopen the file, and 
the offset field is set to "off".


On 5/31/2021 2:00 PM, chirp_users-request at intrepid.danplanet.com wrote:
> CHIRP lets the user enter the RX and TX frequencies as an RX
> frequency, shift direction and offset, but then CHIRP does the math in
> the background to determine the TX frequency. It is the RX frequency
> and TX frequency that CHIRP stores in the CHIRP Radio Images (*.img)
> file to be sent to the radio in that format because that is what the
> radio requires.

-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



More information about the chirp_users mailing list