[chirp_users] Where to get a test for license
Glenn K0LNY
Thu Mar 25 13:29:56 PDT 2021
Hi,
Go to
arrl.org
HTH.
Glenn
----- Original Message -----
From: "zeb doz" <zardoz123456 at gmail.com>
To: <chirp_users at intrepid.danplanet.com>
Sent: Thursday, March 25, 2021 3:23 PM
Subject: [chirp_users] Where to get a test for license
Hello everyone! Where online or what book can I get a good study guide so
that I may obtain my license
Sent from my iPhone
> On Mar 24, 2021, at 2:01 PM, chirp_users-request at intrepid.danplanet.com
> wrote:
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: chirp_users Digest, Vol 147, Issue 8 (Jim Self)
> 2. Re: chirp_users Digest, Vol 147, Issue 8
> (Nigel A. Gunn G8IFF/W8IFF)
> 3. WinXP issue (JP Bernier)
> 4. Re: WinXP issue (John Mehl)
> 5. Re: WinXP issue (Jim Unroe)
> 6. Re: WinXP issue (JP Bernier)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 23 Mar 2021 15:35:57 -0400
> From: Jim Self <jimself1954 at gmail.com>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 147, Issue 8
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
> <CAO6L+xETgEai6VJ_2DH6=pjbrFz9BbvvHDM0+kjy4igOtZWDGQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Please remove me from your mailing list.
>
> Turn Social Media and TV News off and all of the pain in the world goes
> away. You're welcome.
>
>> On Tue, Mar 23, 2021, 3:01 PM
>> <chirp_users-request at intrepid.danplanet.com>
>> wrote:
>>
>> Send chirp_users mailing list submissions to
>> chirp_users at intrepid.danplanet.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> or, via email, send a message with subject or body 'help' to
>> chirp_users-request at intrepid.danplanet.com
>>
>> You can reach the person managing the list at
>> chirp_users-owner at intrepid.danplanet.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of chirp_users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: I get an "unknown file format" when importing (Eric Oyen)
>> 2. Re: Chirp does not work on my Baofeng UV-5R radio, I am
>> deleting the program!!! (Eric Oyen)
>> 3. Re: I get an "unknown file format" when importing
>> (D.J.J. Ring, Jr.)
>> 4. Help - Programing ICOM handheld IC-2GXET and IC-T7E (Allan Carson)
>> 5. Re: I get an "unknown file format" when importing
>> (Nigel A. Gunn G8IFF/W8IFF)
>> 6. Re: I get an "unknown file format" when importing (Glenn K0LNY)
>> 7. Re: I get an "unknown file format" when importing
>> (Nigel A. Gunn G8IFF/W8IFF)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Mon, 22 Mar 2021 23:08:39 -0700
>> From: Eric Oyen <eric.oyen at icloud.com>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID: <2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F at icloud.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>
>> DE n7zzt Eric
>>
>>
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users at intrepid.danplanet.com <mailto:
>> chirp_users at intrepid.danplanet.com>> wrote:
>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>> Steps I?ve taken:
>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>> Exported memories to a CSV file
>>>> Added the new frequencies to the CSV file
>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file
>> format message
>>>> What am I missing?
>>>> Thanks for any help!
>>>> Steve
>>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com <mailto:
>> chirp_users at intrepid.danplanet.com>
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com <mailto:
>> eric.oyen at icloud.com>
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com <mailto:
>> chirp_users-unsubscribe at intrepid.danplanet.com>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210322/3920f6a7/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Mon, 22 Mar 2021 23:20:55 -0700
>> From: Eric Oyen <eric.oyen at icloud.com>
>> Subject: Re: [chirp_users] Chirp does not work on my Baofeng UV-5R
>> radio, I am deleting the program!!!
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID: <2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5 at icloud.com>
>> Content-Type: text/plain; charset=us-ascii
>>
>> Well, it certainly is handy to have the extra links. Always convenient to
>> have local copies just in case. :)
>>
>> DE N7zzt Eric
>>
>>
>>>> On Mar 19, 2021, at 4:45 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>> On Fri, Mar 19, 2021 at 12:39 AM Glenn K0LNY <glennervin at cableone.net>
>> wrote:
>>>> I only program my UV 5R with Chirp in Linux.
>>>> Glenn
>>> My guess would be that is because your programming cable has a
>>> Prolific type USB-to-Serial chip.
>>> For Windows you would need to download and install the older Prolific
>>> v3.2.0.0 device driver.
>>> https://www.miklor.com/COM/UV_Drivers.php
>>> For macOS you would have to purchase a 3rd party device driver
>>> (Catalina and earlier. No Big Sur support yet.).
>>> https://www.mac-usb-serial.com/
>>> Linux doesn't need this extra bit of TLC because the device drivers
>>> are open source (and don't come from the Prolific company).
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Tue, 23 Mar 2021 02:59:47 -0400
>> From: "D.J.J. Ring, Jr." <n1ea at arrl.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Eric Oyen <eric.oyen at icloud.com>, Discussion of CHIRP
>> <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>> <CADO5RbjSUHQBUygWF+3L6u2pTT1=
>> m9ycOgAX18WuFLV+bDW_aA at mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>>
>> If I'm not mistaken, there was an issue of Microsoft Excel not editing
>> the csv files correctly and when opening such a file up and saving it
>> again, it introduced errors.
>>
>> Such errors did NOT occur with the use of LibreOffice (or OpenOffice)
>> which is available for Windows, Mac OX-X, and Linux.
>>
>> OpenOffice download: https://www.openoffice.org/download/
>> LibreOffice download: https://www.libreoffice.org/download/download/
>> (currently out of order)
>> LibreOffice download:
>> http://mirror.internode.on.net/pub/libreoffice/stable/7.1.1/
>>
>> If Microsoft Excel no longer introduces errors, someone please correct
>> me.
>>
>> 73
>>
>> DR
>> N1EA
>>
>>
>>
>>> On Tue, Mar 23, 2021 at 2:10 AM Eric Oyen via chirp_users
>>> <chirp_users at intrepid.danplanet.com> wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users at intrepid.danplanet.com> wrote:
>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>> Steps I?ve taken:
>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>> Exported memories to a CSV file
>>> Added the new frequencies to the CSV file
>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file
>> format message
>>> What am I missing?
>>> Thanks for any help!
>>> Steve
>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Tue, 23 Mar 2021 12:23:15 +0200
>> From: Allan Carson <amcarson1000 at gmail.com>
>> Subject: [chirp_users] Help - Programing ICOM handheld IC-2GXET and
>> IC-T7E
>> To: chirp_users at intrepid.danplanet.com
>> Message-ID:
>> <CANheJuSYdcmWorN0sQ_Rcyf6H_G05afhNBtOiAWU=
>> HqQWP52rg at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Chirp,
>>
>> Great job you guys are doing there - thanks!
>>
>> Can you please give me some help - I have a multi-function JiYKR cable
>> to program my radios, but I can't seem to be able to get in to change or
>> save any of the settings when I use the 'live' mode on Chirp. Could you
>> give me some info on how to use the live mode and or suggest any other
>> versions that I can use to program the IC-2GXET and IC-T7E?
>>
>> Thanks for your help
>>
>> 73
>>
>> Allan - ZS1AL
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/e09b712b/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Tue, 23 Mar 2021 08:45:46 -0400 (EDT)
>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Eric Oyen <eric.oyen at icloud.com>, Eric Oyen via chirp_users
>> <chirp_users at intrepid.danplanet.com>
>> Message-ID: <1798531439.157211.1616503546336 at email.ionos.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> The best way is not to use CSV files at all.
>>
>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users at intrepid.danplanet.com> wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <
>> rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>> chirp_users
>>>> <chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com > wrote:
>>>>>>> ?m trying to import a csv file into
>> CHIRP to upload back to my radio.
>>>>> Steps I?ve taken:
>>>>> Connected radio to CHIRP and downloaded the memories to
>> CHIRP
>>>>> Exported memories to a CSV file
>>>>> Added the new frequencies to the CSV file
>>>>> Saved CSV and tried to import back to CHIRP bur getting
>> an unknown file format message
>>>>> What am I missing?
>>>>> Thanks for any help!
>>>>> Steve
>>>>> KF0CPV
>>>>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file
>> using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this
>> conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was
>> changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>> mailto:eric.oyen at icloud.com
>>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com mailto:
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________ chirp_users mailing
>> list chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
>> http://www.ngunn.net
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/6698180b/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 6
>> Date: Tue, 23 Mar 2021 10:37:38 -0500
>> From: "Glenn K0LNY" <glennervin at cableone.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
>> Message-ID: <0a9b01d71ffa$7528c450$7001a8c0 at NUCPPYH>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Well from the perspective of a screenreader user, I find editing things
>> much easier to make changes in a spreadsheet program outside of Chirp and
>> import them after the changes were made, so I would call that, the better
>> way.
>> Glenn
>>
>> ----- Original Message -----
>> From: Nigel A. Gunn G8IFF/W8IFF
>> To: Eric Oyen ; Eric Oyen via chirp_users
>> Sent: Tuesday, March 23, 2021 7:45 AM
>> Subject: Re: [chirp_users] I get an "unknown file format" when importing
>>
>>
>> The best way is not to use CSV files at all.
>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users at intrepid.danplanet.com> wrote:
>>
>>
>>
>>
>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>
>>
>> DE n7zzt Eric
>>
>>
>>
>>
>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>> <chirp_users at intrepid.danplanet.com> wrote:
>>
>>
>> ?m trying to import a csv file into CHIRP to upload back to my
>> radio.
>>
>>
>>
>> Steps I?ve taken:
>>
>>
>>
>> Connected radio to CHIRP and downloaded the memories to CHIRP
>> Exported memories to a CSV file
>> Added the new frequencies to the CSV file
>> Saved CSV and tried to import back to CHIRP bur getting an unknown
>> file format message
>>
>>
>>
>> What am I missing?
>>
>>
>>
>> Thanks for any help!
>>
>>
>>
>> Steve
>>
>> KF0CPV
>>
>>
>> How did you edit the CSV file?
>> What did you change?
>> Did you compare the new CSV file to the original file CSV file using a
>> text editor?
>> Attach both the before and after CSV files to this conversation so
>> that they can be reviewed.
>>
>> The most common cause of trouble is...
>>
>> - The data format of a cell was changed.
>> - The number of commas required at the end of a data row was changed.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> _______________________________________________ chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
>> http://www.ngunn.net
>>
>>
>>
>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Glenn at glennervin at cableone.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/bd7bfcce/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 7
>> Date: Tue, 23 Mar 2021 12:00:29 -0400 (EDT)
>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Glenn
>> K0LNY <glennervin at cableone.net>
>> Message-ID: <1865543066.169729.1616515229259 at email.ionos.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Agreed. If you can, use Libre Office rather than a Microsoft product.
>> Excel messes with the empty comma seperated fields at the end of each
>> row.
>>
>>
>>>> On 23/03/2021 11:37 Glenn K0LNY <glennervin at cableone.net> wrote:
>>> Well from the perspective of a screenreader user, I find editing
>> things much easier to make changes in a spreadsheet program outside of
>> Chirp and import them after the changes were made, so I would call that,
>> the better way.
>>> Glenn
>>> ----- Original Message -----
>>> From: Nigel A. Gunn G8IFF/W8IFF mailto:nigel at ngunn.net
>>> To: Eric Oyen mailto:eric.oyen at icloud.com ; Eric Oyen via
>> chirp_users mailto:chirp_users at intrepid.danplanet.com
>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>>> The best way is not to use CSV files at all.
>>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a
>> spreadsheet program like Microsoft excel or one of the linux free
>> variants.
>> Simply import as a cSV, do your editing, then export back to a CSV file.
>> Compare the original to the new edited version to make sure the same
>> number
>> of commas are in place on the right lines. BTW, I have already tried this
>> on my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>>> DE n7zzt Eric
>>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <
>> rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>> chirp_users
>>>>> <chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com > wrote:
>>>>>>>>> ?m trying to import a csv
>> file into CHIRP to upload back to my radio.
>>>>>> Steps I?ve taken:
>>>>>> Connected radio to CHIRP and downloaded the
>> memories to CHIRP
>>>>>> Exported memories to a CSV file
>>>>>> Added the new frequencies to the CSV file
>>>>>> Saved CSV and tried to import back to CHIRP bur
>> getting an unknown file format message
>>>>>> What am I missing?
>>>>>> Thanks for any help!
>>>>>> Steve
>>>>>> KF0CPV
>>>>>>>>> How did you edit the CSV file?
>>>>> What did you change?
>>>>> Did you compare the new CSV file to the original file
>> CSV file using a
>>>>> text editor?
>>>>> Attach both the before and after CSV files to this
>> conversation so
>>>>> that they can be reviewed.
>>>>> The most common cause of trouble is...
>>>>> - The data format of a cell was changed.
>>>>> - The number of commas required at the end of a data row
>> was changed.
>>>>> Jim KC9HI
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Eric Oyen at
>> eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com mailto:
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________ chirp_users
>> mailing list chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel
>> +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net
>> www http://www.ngunn.net
>>> ---------------------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Glenn at glennervin at cableone.net
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> _______________________________________________ chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
>> http://www.ngunn.net
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/09707b12/attachment-0001.html
>>
>> ------------------------------
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> End of chirp_users Digest, Vol 147, Issue 8
>> *******************************************
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/fab1a28d/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Tue, 23 Mar 2021 16:27:36 -0400 (EDT)
> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 147, Issue 8
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Jim Self
> <jimself1954 at gmail.com>
> Message-ID: <856520331.188568.1616531256149 at email.ionos.com>
> Content-Type: text/plain; charset="utf-8"
>
> Follow the instruction at the bottom of every email that you recieve from
> this list but obviously don't read.
>
>
>> On 23/03/2021 15:35 Jim Self <jimself1954 at gmail.com> wrote:
>>
>>
>> Please remove me from your mailing list.
>>
>> Turn Social Media and TV News off and all of the pain in the world
>> goes away. You're welcome.
>>
>> On Tue, Mar 23, 2021, 3:01 PM
>> <chirp_users-request at intrepid.danplanet.com
>> mailto:chirp_users-request at intrepid.danplanet.com > wrote:
>>
>>>> Send chirp_users mailing list submissions to
>>> chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> or, via email, send a message with subject or body 'help' to
>>> chirp_users-request at intrepid.danplanet.com
>>> mailto:chirp_users-request at intrepid.danplanet.com
>>> You can reach the person managing the list at
>>> chirp_users-owner at intrepid.danplanet.com
>>> mailto:chirp_users-owner at intrepid.danplanet.com
>>> When replying, please edit your Subject line so it is more
>>> specific
>>> than "Re: Contents of chirp_users digest..."
>>> Today's Topics:
>>> 1. Re: I get an "unknown file format" when importing (Eric
>>> Oyen)
>>> 2. Re: Chirp does not work on my Baofeng UV-5R radio, I am
>>> deleting the program!!! (Eric Oyen)
>>> 3. Re: I get an "unknown file format" when importing
>>> (D.J.J. Ring, Jr.)
>>> 4. Help - Programing ICOM handheld IC-2GXET and IC-T7E (Allan
>>> Carson)
>>> 5. Re: I get an "unknown file format" when importing
>>> (Nigel A. Gunn G8IFF/W8IFF)
>>> 6. Re: I get an "unknown file format" when importing (Glenn
>>> K0LNY)
>>> 7. Re: I get an "unknown file format" when importing
>>> (Nigel A. Gunn G8IFF/W8IFF)
>>> ----------------------------------------------------------------------
>>> Message: 1
>>> Date: Mon, 22 Mar 2021 23:08:39 -0700
>>> From: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>> >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F at icloud.com
>>> mailto:2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F at icloud.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> One good way I have found to edit CsV files is to use a
>>> spreadsheet program like Microsoft excel or one of the linux free
>>> variants. Simply import as a cSV, do your editing, then export back to a
>>> CSV file. Compare the original to the new edited version to make sure
>>> the same number of commas are in place on the right lines. BTW, I have
>>> already tried this on my windows box using excel and a program
>>> specifically designed for the Baofeng radio. So, it should work the same
>>> way with chirp as both that program and cHIRP should read or write CSV
>>> files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com
>>>> mailto:rock.unroe at gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>> <chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> <mailto:chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com >> wrote:
>>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>>> Steps I?ve taken:
>>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>>> Exported memories to a CSV file
>>>>> Added the new frequencies to the CSV file
>>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown
>>>>> file format message
>>>>> What am I missing?
>>>>> Thanks for any help!
>>>>> Steve
>>>>> KF0CPV
>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> <mailto:chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com >
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>>> mailto:eric.oyen at icloud.com <mailto:eric.oyen at icloud.com
>>>> mailto:eric.oyen at icloud.com >
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> <mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com >
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL:
>>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210322/3920f6a7/attachment-0001.html
>>> ------------------------------
>>> Message: 2
>>> Date: Mon, 22 Mar 2021 23:20:55 -0700
>>> From: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>> >
>>> Subject: Re: [chirp_users] Chirp does not work on my Baofeng
>>> UV-5R
>>> radio, I am deleting the program!!!
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5 at icloud.com
>>> mailto:2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5 at icloud.com >
>>> Content-Type: text/plain; charset=us-ascii
>>> Well, it certainly is handy to have the extra links. Always
>>> convenient to have local copies just in case. :)
>>> DE N7zzt Eric
>>>> On Mar 19, 2021, at 4:45 AM, Jim Unroe <rock.unroe at gmail.com
>>>> mailto:rock.unroe at gmail.com > wrote:
>>>> On Fri, Mar 19, 2021 at 12:39 AM Glenn K0LNY <glennervin at cableone.net
>>>> mailto:glennervin at cableone.net > wrote:
>>>>> I only program my UV 5R with Chirp in Linux.
>>>>> Glenn
>>>> My guess would be that is because your programming cable has a
>>>> Prolific type USB-to-Serial chip.
>>>> For Windows you would need to download and install the older Prolific
>>>> v3.2.0.0 device driver.
>>>> https://www.miklor.com/COM/UV_Drivers.php
>>>> For macOS you would have to purchase a 3rd party device driver
>>>> (Catalina and earlier. No Big Sur support yet.).
>>>> https://www.mac-usb-serial.com/
>>>> Linux doesn't need this extra bit of TLC because the device drivers
>>>> are open source (and don't come from the Prolific company).
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>>> mailto:eric.oyen at icloud.com
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> ------------------------------
>>> Message: 3
>>> Date: Tue, 23 Mar 2021 02:59:47 -0400
>>> From: "D.J.J. Ring, Jr." <n1ea at arrl.net mailto:n1ea at arrl.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>> >, Discussion of CHIRP
>>> <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID:
>>>
>>> <CADO5RbjSUHQBUygWF+3L6u2pTT1=m9ycOgAX18WuFLV+bDW_aA at mail.gmail.com
>>> mailto:m9ycOgAX18WuFLV%2BbDW_aA at mail.gmail.com >
>>> Content-Type: text/plain; charset="UTF-8"
>>> If I'm not mistaken, there was an issue of Microsoft Excel not
>>> editing
>>> the csv files correctly and when opening such a file up and
>>> saving it
>>> again, it introduced errors.
>>> Such errors did NOT occur with the use of LibreOffice (or
>>> OpenOffice)
>>> which is available for Windows, Mac OX-X, and Linux.
>>> OpenOffice download: https://www.openoffice.org/download/
>>> LibreOffice download:
>>> https://www.libreoffice.org/download/download/
>>> (currently out of order)
>>> LibreOffice download:
>>> http://mirror.internode.on.net/pub/libreoffice/stable/7.1.1/
>>> If Microsoft Excel no longer introduces errors, someone please
>>> correct me.
>>> 73
>>> DR
>>> N1EA
>>> On Tue, Mar 23, 2021 at 2:10 AM Eric Oyen via chirp_users
>>> <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a spreadsheet
>>>> program like Microsoft excel or one of the linux free variants. Simply
>>>> import as a cSV, do your editing, then export back to a CSV file.
>>>> Compare the original to the new edited version to make sure the same
>>>> number of commas are in place on the right lines. BTW, I have already
>>>> tried this on my windows box using excel and a program specifically
>>>> designed for the Baofeng radio. So, it should work the same way with
>>>> chirp as both that program and cHIRP should read or write CSV files in
>>>> the same way.
>>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com
>>>> mailto:rock.unroe at gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>> <chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>> Steps I?ve taken:
>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>> Exported memories to a CSV file
>>>> Added the new frequencies to the CSV file
>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file
>>>> format message
>>>> What am I missing?
>>>> Thanks for any help!
>>>> Steve
>>>> KF0CPV
>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>>> mailto:eric.oyen at icloud.com
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
>>>> mailto:n1ea at arrl.net
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> ------------------------------
>>> Message: 4
>>> Date: Tue, 23 Mar 2021 12:23:15 +0200
>>> From: Allan Carson <amcarson1000 at gmail.com
>>> mailto:amcarson1000 at gmail.com >
>>> Subject: [chirp_users] Help - Programing ICOM handheld IC-2GXET
>>> and
>>> IC-T7E
>>> To: chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com
>>> Message-ID:
>>>
>>> <CANheJuSYdcmWorN0sQ_Rcyf6H_G05afhNBtOiAWU=HqQWP52rg at mail.gmail.com
>>> mailto:HqQWP52rg at mail.gmail.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> Hi Chirp,
>>> Great job you guys are doing there - thanks!
>>> Can you please give me some help - I have a multi-function JiYKR
>>> cable
>>> to program my radios, but I can't seem to be able to get in to
>>> change or
>>> save any of the settings when I use the 'live' mode on Chirp.
>>> Could you
>>> give me some info on how to use the live mode and or suggest any
>>> other
>>> versions that I can use to program the IC-2GXET and IC-T7E?
>>> Thanks for your help
>>> 73
>>> Allan - ZS1AL
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL:
>>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/e09b712b/attachment-0001.html
>>> ------------------------------
>>> Message: 5
>>> Date: Tue, 23 Mar 2021 08:45:46 -0400 (EDT)
>>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net
>>> mailto:nigel at ngunn.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>> >, Eric Oyen via chirp_users
>>> <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <1798531439.157211.1616503546336 at email.ionos.com
>>> mailto:1798531439.157211.1616503546336 at email.ionos.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> The best way is not to use CSV files at all.
>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users
>>>> <chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a spreadsheet
>>>> program like Microsoft excel or one of the linux free variants. Simply
>>>> import as a cSV, do your editing, then export back to a CSV file.
>>>> Compare the original to the new edited version to make sure the same
>>>> number of commas are in place on the right lines. BTW, I have already
>>>> tried this on my windows box using excel and a program specifically
>>>> designed for the Baofeng radio. So, it should work the same way with
>>>> chirp as both that program and cHIRP should read or write CSV files in
>>>> the same way.
>>>> DE n7zzt Eric
>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com
>>>>>> mailto:rock.unroe at gmail.com mailto:rock.unroe at gmail.com
>>>>>> mailto:rock.unroe at gmail.com > wrote:
>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>>>>> chirp_users
>>>>> <chirp_users at intrepid.danplanet.com
>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>>>>>> ?m trying to import a csv file into CHIRP to upload back
>>>>>>>> to my radio.
>>>>>> Steps I?ve taken:
>>>>>> Connected radio to CHIRP and downloaded the memories to
>>>>>> CHIRP
>>>>>> Exported memories to a CSV file
>>>>>> Added the new frequencies to the CSV file
>>>>>> Saved CSV and tried to import back to CHIRP bur getting an
>>>>>> unknown file format message
>>>>>> What am I missing?
>>>>>> Thanks for any help!
>>>>>> Steve
>>>>>> KF0CPV
>>>>>>>> How did you edit the CSV file?
>>>>> What did you change?
>>>>> Did you compare the new CSV file to the original file CSV file
>>>>> using a
>>>>> text editor?
>>>>> Attach both the before and after CSV files to this conversation
>>>>> so
>>>>> that they can be reviewed.
>>>>> The most common cause of trouble is...
>>>>> - The data format of a cell was changed.
>>>>> - The number of commas required at the end of a data row was
>>>>> changed.
>>>>> Jim KC9HI
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>>>> mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>>> mailto:eric.oyen at icloud.com
>>>>> To unsubscribe, send an email to
>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________ chirp_users mailing
>>>> list chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>>>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel
>>> +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail
>>> nigel at ngunn.net mailto:nigel at ngunn.net www http://www.ngunn.net
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL:
>>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/6698180b/attachment-0001.html
>>> ------------------------------
>>> Message: 6
>>> Date: Tue, 23 Mar 2021 10:37:38 -0500
>>> From: "Glenn K0LNY" <glennervin at cableone.net
>>> mailto:glennervin at cableone.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <0a9b01d71ffa$7528c450$7001a8c0 at NUCPPYH>
>>> Content-Type: text/plain; charset="utf-8"
>>> Well from the perspective of a screenreader user, I find editing
>>> things much easier to make changes in a spreadsheet program outside of
>>> Chirp and import them after the changes were made, so I would call that,
>>> the better way.
>>> Glenn
>>> ----- Original Message -----
>>> From: Nigel A. Gunn G8IFF/W8IFF
>>> To: Eric Oyen ; Eric Oyen via chirp_users
>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> The best way is not to use CSV files at all.
>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users
>>>> <chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>> One good way I have found to edit CsV files is to use a
>>> spreadsheet program like Microsoft excel or one of the linux free
>>> variants. Simply import as a cSV, do your editing, then export back to a
>>> CSV file. Compare the original to the new edited version to make sure
>>> the same number of commas are in place on the right lines. BTW, I have
>>> already tried this on my windows box using excel and a program
>>> specifically designed for the Baofeng radio. So, it should work the same
>>> way with chirp as both that program and cHIRP should read or write CSV
>>> files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe
>>>> <rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>>> chirp_users
>>> <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>> ?m trying to import a csv file into CHIRP to upload back to
>>> my radio.
>>> Steps I?ve taken:
>>> Connected radio to CHIRP and downloaded the memories to
>>> CHIRP
>>> Exported memories to a CSV file
>>> Added the new frequencies to the CSV file
>>> Saved CSV and tried to import back to CHIRP bur getting an
>>> unknown file format message
>>> What am I missing?
>>> Thanks for any help!
>>> Steve
>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV
>>> file using a
>>> text editor?
>>> Attach both the before and after CSV files to this
>>> conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was
>>> changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>> mailto:eric.oyen at icloud.com
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________ chirp_users
>>> mailing list chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel
>>> +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail
>>> nigel at ngunn.net mailto:nigel at ngunn.net www http://www.ngunn.net
>>> --------------------------------------------------------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Glenn at glennervin at cableone.net
>>> mailto:glennervin at cableone.net
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL:
>>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/bd7bfcce/attachment-0001.html
>>> ------------------------------
>>> Message: 7
>>> Date: Tue, 23 Mar 2021 12:00:29 -0400 (EDT)
>>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net
>>> mailto:nigel at ngunn.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com >, Glenn
>>> K0LNY <glennervin at cableone.net
>>> mailto:glennervin at cableone.net >
>>> Message-ID: <1865543066.169729.1616515229259 at email.ionos.com
>>> mailto:1865543066.169729.1616515229259 at email.ionos.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> Agreed. If you can, use Libre Office rather than a Microsoft
>>> product. Excel messes with the empty comma seperated fields at the end
>>> of each row.
>>>> On 23/03/2021 11:37 Glenn K0LNY <glennervin at cableone.net
>>>> mailto:glennervin at cableone.net > wrote:
>>>> Well from the perspective of a screenreader user, I find editing
>>>> things much easier to make changes in a spreadsheet program outside of
>>>> Chirp and import them after the changes were made, so I would call
>>>> that, the better way.
>>>> Glenn
>>>> ----- Original Message -----
>>>> From: Nigel A. Gunn G8IFF/W8IFF mailto:nigel at ngunn.net
>>>> mailto:nigel at ngunn.net
>>>> To: Eric Oyen mailto:eric.oyen at icloud.com
>>>> mailto:eric.oyen at icloud.com ; Eric Oyen via chirp_users
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>>> importing
>>>> The best way is not to use CSV files at all.
>>>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users
>>>>>> <chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>>> One good way I have found to edit CsV files is to use a
>>>>> spreadsheet program like Microsoft excel or one of the linux free
>>>>> variants. Simply import as a cSV, do your editing, then export back to
>>>>> a CSV file. Compare the original to the new edited version to make
>>>>> sure the same number of commas are in place on the right lines. BTW, I
>>>>> have already tried this on my windows box using excel and a program
>>>>> specifically designed for the Baofeng radio. So, it should work the
>>>>> same way with chirp as both that program and cHIRP should read or
>>>>> write CSV files in the same way.
>>>>> DE n7zzt Eric
>>>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe
>>>>>>>> <rock.unroe at gmail.com mailto:rock.unroe at gmail.com
>>>>>>>> mailto:rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>>>>>> chirp_users
>>>>>> <chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>>>>>>>> ?m trying to import a csv file into CHIRP to
>>>>>>>>>> upload back to my radio.
>>>>>>> Steps I?ve taken:
>>>>>>> Connected radio to CHIRP and downloaded the memories
>>>>>>> to CHIRP
>>>>>>> Exported memories to a CSV file
>>>>>>> Added the new frequencies to the CSV file
>>>>>>> Saved CSV and tried to import back to CHIRP bur
>>>>>>> getting an unknown file format message
>>>>>>> What am I missing?
>>>>>>> Thanks for any help!
>>>>>>> Steve
>>>>>>> KF0CPV
>>>>>>>>>> How did you edit the CSV file?
>>>>>> What did you change?
>>>>>> Did you compare the new CSV file to the original file CSV
>>>>>> file using a
>>>>>> text editor?
>>>>>> Attach both the before and after CSV files to this
>>>>>> conversation so
>>>>>> that they can be reviewed.
>>>>>> The most common cause of trouble is...
>>>>>> - The data format of a cell was changed.
>>>>>> - The number of commas required at the end of a data row
>>>>>> was changed.
>>>>>> Jim KC9HI
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>> chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>>>>> mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>>>> mailto:eric.oyen at icloud.com
>>>>>> To unsubscribe, send an email to
>>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> _______________________________________________ chirp_users
>>>>> mailing list chirp_users at intrepid.danplanet.com
>>>>> mailto:chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This
>>>>> message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>>>>> mailto:nigel at ngunn.net To unsubscribe, send an email to
>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel
>>>> +1-937-971-0366
>>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net
>>>> mailto:nigel at ngunn.net www http://www.ngunn.net
>>>> ---------------------------------------------
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Glenn at glennervin at cableone.net
>>>> mailto:glennervin at cableone.net
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________ chirp_users mailing
>>>> list chirp_users at intrepid.danplanet.com
>>>> mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>>>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel
>>> +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail
>>> nigel at ngunn.net mailto:nigel at ngunn.net www http://www.ngunn.net
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL:
>>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/09707b12/attachment-0001.html
>>> ------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> mailto:chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> End of chirp_users Digest, Vol 147, Issue 8
>>> *******************************************
>>>> _______________________________________________ chirp_users mailing
>>>> list chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>>>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send
>>>> an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
> http://www.ngunn.net
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/4c88116f/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Tue, 23 Mar 2021 22:18:09 -0600
> From: JP Bernier <jp.bernier at gmail.com>
> Subject: [chirp_users] WinXP issue
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
> <CAESvpJPSawtqARBfKD0mTBBVdVzKvPe8hEWmhMqY5P=dGf+yOg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi,
> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
> with a long-dead WinXP laptop. The Kenwood had the chronic screen failure
> years ago that I had a weird hair to fix, and did with success! Now I want
> to update the programming. I found a functioning XP laptop and I've
> jumped
> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
> WInXP, but I got that to work finally (with a deeply buried legacy
> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
> import my current .csv file and put it on the Kenwood. I get: "This
> application has failed to start because the application configuration is
> incorrect. Reinstalling the application may fix the problem" (it doesn't).
> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
> don't know where to find it on the CHIRP website.
>
> Conversely, I have the ancient Kenwood MCP_V7 software successfully
> installed on the XP, but it doesn't seem to import anything at all. Not
> sure the point of software that only reads the radio without the ability
> to
> import data to upload, but whatever. If anyone knows how to get a .csv
> file into that it would get the job done just as well.
>
> Cheers,
> JP. KF7QJY
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/0ebdd6cb/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Wed, 24 Mar 2021 07:05:53 -0400
> From: John Mehl <ke4egc at gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAP90CoLwKyZMvxPc5pCVnqxJWHPH2-CLzUPYTsJKiNBoLeN=mA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi JP, I don't know if this would help but the current version of CHIRP
> supports the Kewood TM V7. It might be worth trying to see if your
> programming cable will work with it. Just a thought.....John
>
>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier at gmail.com> wrote:
>>
>> Hi,
>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
>> with a long-dead WinXP laptop. The Kenwood had the chronic screen
>> failure
>> years ago that I had a weird hair to fix, and did with success! Now I
>> want
>> to update the programming. I found a functioning XP laptop and I've
>> jumped
>> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
>> WInXP, but I got that to work finally (with a deeply buried legacy
>> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
>> import my current .csv file and put it on the Kenwood. I get: "This
>> application has failed to start because the application configuration is
>> incorrect. Reinstalling the application may fix the problem" (it
>> doesn't).
>> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
>> don't know where to find it on the CHIRP website.
>>
>> Conversely, I have the ancient Kenwood MCP_V7 software successfully
>> installed on the XP, but it doesn't seem to import anything at all. Not
>> sure the point of software that only reads the radio without the ability
>> to
>> import data to upload, but whatever. If anyone knows how to get a .csv
>> file into that it would get the job done just as well.
>>
>> Cheers,
>> JP. KF7QJY
>>
>>
>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
>> Virus-free.
>> www.avast.com
>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
>> <#m_8937370199243590176_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to John at ke4egc at arrl.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210324/fbc068ea/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Wed, 24 Mar 2021 08:07:44 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CADnO8U5Te1BVjCf57Y_s_ya7JdyBzRwd1GO8Bq2dugUwA9bH5g at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier at gmail.com> wrote:
>>
>> Hi,
>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
>> with a long-dead WinXP laptop. The Kenwood had the chronic screen
>> failure years ago that I had a weird hair to fix, and did with success!
>> Now I want to update the programming. I found a functioning XP laptop and
>> I've jumped through 10k hoops getting my modern Yaesu/ Prolific USB cable
>> to talk to WInXP, but I got that to work finally (with a deeply buried
>> legacy driver)... now I'm trying to install CHIRP on on the XP laptop so
>> I can import my current .csv file and put it on the Kenwood. I get:
>> "This application has failed to start because the application
>> configuration is incorrect. Reinstalling the application may fix the
>> problem" (it doesn't). I think a legacy version (2004'ish?) of CHIRP
>> might be the thing, but I don't know where to find it on the CHIRP
>> website.
>>
>> Conversely, I have the ancient Kenwood MCP_V7 software successfully
>> installed on the XP, but it doesn't seem to import anything at all. Not
>> sure the point of software that only reads the radio without the ability
>> to import data to upload, but whatever. If anyone knows how to get a
>> .csv file into that it would get the job done just as well.
>>
>> Cheers,
>> JP. KF7QJY
>
> JP,
>
> You don't have the Microsoft Visual C++ 2008 SP1 Redistributable
> Package installed. See this link on the miklor.com website.
>
> https://www.miklor.com/COM/UV_ErrorMess.php#error20
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 24 Mar 2021 08:02:12 -0600
> From: JP Bernier <jp.bernier at gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAESvpJMY-MoOqLWonEQ7+7Znd-xUTJVBS3oucTiRJjJ6g_wHFg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks Jim, I'll give that a shot.
> JP
>
>> On Wed, Mar 24, 2021, 6:09 AM Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier at gmail.com>
>>> wrote:
>>> Hi,
>>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
>> with a long-dead WinXP laptop. The Kenwood had the chronic screen
>> failure
>> years ago that I had a weird hair to fix, and did with success! Now I
>> want
>> to update the programming. I found a functioning XP laptop and I've
>> jumped
>> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
>> WInXP, but I got that to work finally (with a deeply buried legacy
>> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
>> import my current .csv file and put it on the Kenwood. I get: "This
>> application has failed to start because the application configuration is
>> incorrect. Reinstalling the application may fix the problem" (it
>> doesn't).
>> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
>> don't know where to find it on the CHIRP website.
>>> Conversely, I have the ancient Kenwood MCP_V7 software successfully
>> installed on the XP, but it doesn't seem to import anything at all. Not
>> sure the point of software that only reads the radio without the ability
>> to
>> import data to upload, but whatever. If anyone knows how to get a .csv
>> file into that it would get the job done just as well.
>>> Cheers,
>>> JP. KF7QJY
>>
>> JP,
>>
>> You don't have the Microsoft Visual C++ 2008 SP1 Redistributable
>> Package installed. See this link on the miklor.com website.
>>
>> https://www.miklor.com/COM/UV_ErrorMess.php#error20
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to JP Bernier at jp.bernier at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210324/7f1e4570/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 147, Issue 9
> *******************************************
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com
More information about the chirp_users
mailing list