[chirp_users] Where to get a test for license
zeb doz
Thu Mar 25 13:23:44 PDT 2021
Hello everyone! Where online or what book can I get a good study guide so that I may obtain my license
Sent from my iPhone
> On Mar 24, 2021, at 2:01 PM, chirp_users-request at intrepid.danplanet.com wrote:
> Send chirp_users mailing list submissions to
> chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: chirp_users Digest, Vol 147, Issue 8 (Jim Self)
> 2. Re: chirp_users Digest, Vol 147, Issue 8
> (Nigel A. Gunn G8IFF/W8IFF)
> 3. WinXP issue (JP Bernier)
> 4. Re: WinXP issue (John Mehl)
> 5. Re: WinXP issue (Jim Unroe)
> 6. Re: WinXP issue (JP Bernier)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 23 Mar 2021 15:35:57 -0400
> From: Jim Self <jimself1954 at gmail.com>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 147, Issue 8
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
> <CAO6L+xETgEai6VJ_2DH6=pjbrFz9BbvvHDM0+kjy4igOtZWDGQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Please remove me from your mailing list.
>
> Turn Social Media and TV News off and all of the pain in the world goes
> away. You're welcome.
>
>> On Tue, Mar 23, 2021, 3:01 PM <chirp_users-request at intrepid.danplanet.com>
>> wrote:
>>
>> Send chirp_users mailing list submissions to
>> chirp_users at intrepid.danplanet.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> or, via email, send a message with subject or body 'help' to
>> chirp_users-request at intrepid.danplanet.com
>>
>> You can reach the person managing the list at
>> chirp_users-owner at intrepid.danplanet.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of chirp_users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: I get an "unknown file format" when importing (Eric Oyen)
>> 2. Re: Chirp does not work on my Baofeng UV-5R radio, I am
>> deleting the program!!! (Eric Oyen)
>> 3. Re: I get an "unknown file format" when importing
>> (D.J.J. Ring, Jr.)
>> 4. Help - Programing ICOM handheld IC-2GXET and IC-T7E (Allan Carson)
>> 5. Re: I get an "unknown file format" when importing
>> (Nigel A. Gunn G8IFF/W8IFF)
>> 6. Re: I get an "unknown file format" when importing (Glenn K0LNY)
>> 7. Re: I get an "unknown file format" when importing
>> (Nigel A. Gunn G8IFF/W8IFF)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Mon, 22 Mar 2021 23:08:39 -0700
>> From: Eric Oyen <eric.oyen at icloud.com>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID: <2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F at icloud.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>
>> DE n7zzt Eric
>>
>>
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users at intrepid.danplanet.com <mailto:
>> chirp_users at intrepid.danplanet.com>> wrote:
>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>> Steps I?ve taken:
>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>> Exported memories to a CSV file
>>>> Added the new frequencies to the CSV file
>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file
>> format message
>>>> What am I missing?
>>>> Thanks for any help!
>>>> Steve
>>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com <mailto:
>> chirp_users at intrepid.danplanet.com>
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com <mailto:
>> eric.oyen at icloud.com>
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com <mailto:
>> chirp_users-unsubscribe at intrepid.danplanet.com>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210322/3920f6a7/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Mon, 22 Mar 2021 23:20:55 -0700
>> From: Eric Oyen <eric.oyen at icloud.com>
>> Subject: Re: [chirp_users] Chirp does not work on my Baofeng UV-5R
>> radio, I am deleting the program!!!
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> Message-ID: <2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5 at icloud.com>
>> Content-Type: text/plain; charset=us-ascii
>>
>> Well, it certainly is handy to have the extra links. Always convenient to
>> have local copies just in case. :)
>>
>> DE N7zzt Eric
>>
>>
>>>> On Mar 19, 2021, at 4:45 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>> On Fri, Mar 19, 2021 at 12:39 AM Glenn K0LNY <glennervin at cableone.net>
>> wrote:
>>>> I only program my UV 5R with Chirp in Linux.
>>>> Glenn
>>> My guess would be that is because your programming cable has a
>>> Prolific type USB-to-Serial chip.
>>> For Windows you would need to download and install the older Prolific
>>> v3.2.0.0 device driver.
>>> https://www.miklor.com/COM/UV_Drivers.php
>>> For macOS you would have to purchase a 3rd party device driver
>>> (Catalina and earlier. No Big Sur support yet.).
>>> https://www.mac-usb-serial.com/
>>> Linux doesn't need this extra bit of TLC because the device drivers
>>> are open source (and don't come from the Prolific company).
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Tue, 23 Mar 2021 02:59:47 -0400
>> From: "D.J.J. Ring, Jr." <n1ea at arrl.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Eric Oyen <eric.oyen at icloud.com>, Discussion of CHIRP
>> <chirp_users at intrepid.danplanet.com>
>> Message-ID:
>> <CADO5RbjSUHQBUygWF+3L6u2pTT1=
>> m9ycOgAX18WuFLV+bDW_aA at mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>>
>> If I'm not mistaken, there was an issue of Microsoft Excel not editing
>> the csv files correctly and when opening such a file up and saving it
>> again, it introduced errors.
>>
>> Such errors did NOT occur with the use of LibreOffice (or OpenOffice)
>> which is available for Windows, Mac OX-X, and Linux.
>>
>> OpenOffice download: https://www.openoffice.org/download/
>> LibreOffice download: https://www.libreoffice.org/download/download/
>> (currently out of order)
>> LibreOffice download:
>> http://mirror.internode.on.net/pub/libreoffice/stable/7.1.1/
>>
>> If Microsoft Excel no longer introduces errors, someone please correct me.
>>
>> 73
>>
>> DR
>> N1EA
>>
>>
>>
>>> On Tue, Mar 23, 2021 at 2:10 AM Eric Oyen via chirp_users
>>> <chirp_users at intrepid.danplanet.com> wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users at intrepid.danplanet.com> wrote:
>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>> Steps I?ve taken:
>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>> Exported memories to a CSV file
>>> Added the new frequencies to the CSV file
>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file
>> format message
>>> What am I missing?
>>> Thanks for any help!
>>> Steve
>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Tue, 23 Mar 2021 12:23:15 +0200
>> From: Allan Carson <amcarson1000 at gmail.com>
>> Subject: [chirp_users] Help - Programing ICOM handheld IC-2GXET and
>> IC-T7E
>> To: chirp_users at intrepid.danplanet.com
>> Message-ID:
>> <CANheJuSYdcmWorN0sQ_Rcyf6H_G05afhNBtOiAWU=
>> HqQWP52rg at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Chirp,
>>
>> Great job you guys are doing there - thanks!
>>
>> Can you please give me some help - I have a multi-function JiYKR cable
>> to program my radios, but I can't seem to be able to get in to change or
>> save any of the settings when I use the 'live' mode on Chirp. Could you
>> give me some info on how to use the live mode and or suggest any other
>> versions that I can use to program the IC-2GXET and IC-T7E?
>>
>> Thanks for your help
>>
>> 73
>>
>> Allan - ZS1AL
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/e09b712b/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Tue, 23 Mar 2021 08:45:46 -0400 (EDT)
>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Eric Oyen <eric.oyen at icloud.com>, Eric Oyen via chirp_users
>> <chirp_users at intrepid.danplanet.com>
>> Message-ID: <1798531439.157211.1616503546336 at email.ionos.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> The best way is not to use CSV files at all.
>>
>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users at intrepid.danplanet.com> wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <
>> rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>> chirp_users
>>>> <chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com > wrote:
>>>>>>> ?m trying to import a csv file into
>> CHIRP to upload back to my radio.
>>>>> Steps I?ve taken:
>>>>> Connected radio to CHIRP and downloaded the memories to
>> CHIRP
>>>>> Exported memories to a CSV file
>>>>> Added the new frequencies to the CSV file
>>>>> Saved CSV and tried to import back to CHIRP bur getting
>> an unknown file format message
>>>>> What am I missing?
>>>>> Thanks for any help!
>>>>> Steve
>>>>> KF0CPV
>>>>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file
>> using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this
>> conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was
>> changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>> mailto:eric.oyen at icloud.com
>>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com mailto:
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________ chirp_users mailing
>> list chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
>> http://www.ngunn.net
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/6698180b/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 6
>> Date: Tue, 23 Mar 2021 10:37:38 -0500
>> From: "Glenn K0LNY" <glennervin at cableone.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
>> Message-ID: <0a9b01d71ffa$7528c450$7001a8c0 at NUCPPYH>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Well from the perspective of a screenreader user, I find editing things
>> much easier to make changes in a spreadsheet program outside of Chirp and
>> import them after the changes were made, so I would call that, the better
>> way.
>> Glenn
>>
>> ----- Original Message -----
>> From: Nigel A. Gunn G8IFF/W8IFF
>> To: Eric Oyen ; Eric Oyen via chirp_users
>> Sent: Tuesday, March 23, 2021 7:45 AM
>> Subject: Re: [chirp_users] I get an "unknown file format" when importing
>>
>>
>> The best way is not to use CSV files at all.
>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users at intrepid.danplanet.com> wrote:
>>
>>
>>
>>
>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>
>>
>> DE n7zzt Eric
>>
>>
>>
>>
>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>> <chirp_users at intrepid.danplanet.com> wrote:
>>
>>
>> ?m trying to import a csv file into CHIRP to upload back to my
>> radio.
>>
>>
>>
>> Steps I?ve taken:
>>
>>
>>
>> Connected radio to CHIRP and downloaded the memories to CHIRP
>> Exported memories to a CSV file
>> Added the new frequencies to the CSV file
>> Saved CSV and tried to import back to CHIRP bur getting an unknown
>> file format message
>>
>>
>>
>> What am I missing?
>>
>>
>>
>> Thanks for any help!
>>
>>
>>
>> Steve
>>
>> KF0CPV
>>
>>
>> How did you edit the CSV file?
>> What did you change?
>> Did you compare the new CSV file to the original file CSV file using a
>> text editor?
>> Attach both the before and after CSV files to this conversation so
>> that they can be reviewed.
>>
>> The most common cause of trouble is...
>>
>> - The data format of a cell was changed.
>> - The number of commas required at the end of a data row was changed.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Eric Oyen at eric.oyen at icloud.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> _______________________________________________ chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
>> http://www.ngunn.net
>>
>>
>>
>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Glenn at glennervin at cableone.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/bd7bfcce/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 7
>> Date: Tue, 23 Mar 2021 12:00:29 -0400 (EDT)
>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Glenn
>> K0LNY <glennervin at cableone.net>
>> Message-ID: <1865543066.169729.1616515229259 at email.ionos.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Agreed. If you can, use Libre Office rather than a Microsoft product.
>> Excel messes with the empty comma seperated fields at the end of each row.
>>
>>
>>>> On 23/03/2021 11:37 Glenn K0LNY <glennervin at cableone.net> wrote:
>>> Well from the perspective of a screenreader user, I find editing
>> things much easier to make changes in a spreadsheet program outside of
>> Chirp and import them after the changes were made, so I would call that,
>> the better way.
>>> Glenn
>>> ----- Original Message -----
>>> From: Nigel A. Gunn G8IFF/W8IFF mailto:nigel at ngunn.net
>>> To: Eric Oyen mailto:eric.oyen at icloud.com ; Eric Oyen via
>> chirp_users mailto:chirp_users at intrepid.danplanet.com
>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>>> The best way is not to use CSV files at all.
>>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a
>> spreadsheet program like Microsoft excel or one of the linux free variants.
>> Simply import as a cSV, do your editing, then export back to a CSV file.
>> Compare the original to the new edited version to make sure the same number
>> of commas are in place on the right lines. BTW, I have already tried this
>> on my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>>> DE n7zzt Eric
>>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <
>> rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>> chirp_users
>>>>> <chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com > wrote:
>>>>>>>>> ?m trying to import a csv
>> file into CHIRP to upload back to my radio.
>>>>>> Steps I?ve taken:
>>>>>> Connected radio to CHIRP and downloaded the
>> memories to CHIRP
>>>>>> Exported memories to a CSV file
>>>>>> Added the new frequencies to the CSV file
>>>>>> Saved CSV and tried to import back to CHIRP bur
>> getting an unknown file format message
>>>>>> What am I missing?
>>>>>> Thanks for any help!
>>>>>> Steve
>>>>>> KF0CPV
>>>>>>>>> How did you edit the CSV file?
>>>>> What did you change?
>>>>> Did you compare the new CSV file to the original file
>> CSV file using a
>>>>> text editor?
>>>>> Attach both the before and after CSV files to this
>> conversation so
>>>>> that they can be reviewed.
>>>>> The most common cause of trouble is...
>>>>> - The data format of a cell was changed.
>>>>> - The number of commas required at the end of a data row
>> was changed.
>>>>> Jim KC9HI
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com mailto:
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Eric Oyen at
>> eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com mailto:
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________ chirp_users
>> mailing list chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel
>> +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net
>> www http://www.ngunn.net
>>> ---------------------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Glenn at glennervin at cableone.net
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> _______________________________________________ chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
>> http://www.ngunn.net
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/09707b12/attachment-0001.html
>>
>> ------------------------------
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> End of chirp_users Digest, Vol 147, Issue 8
>> *******************************************
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/fab1a28d/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Tue, 23 Mar 2021 16:27:36 -0400 (EDT)
> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 147, Issue 8
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Jim Self
> <jimself1954 at gmail.com>
> Message-ID: <856520331.188568.1616531256149 at email.ionos.com>
> Content-Type: text/plain; charset="utf-8"
>
> Follow the instruction at the bottom of every email that you recieve from this list but obviously don't read.
>
>
>> On 23/03/2021 15:35 Jim Self <jimself1954 at gmail.com> wrote:
>>
>>
>> Please remove me from your mailing list.
>>
>> Turn Social Media and TV News off and all of the pain in the world goes away. You're welcome.
>>
>> On Tue, Mar 23, 2021, 3:01 PM <chirp_users-request at intrepid.danplanet.com mailto:chirp_users-request at intrepid.danplanet.com > wrote:
>>
>>>> Send chirp_users mailing list submissions to
>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> or, via email, send a message with subject or body 'help' to
>>> chirp_users-request at intrepid.danplanet.com mailto:chirp_users-request at intrepid.danplanet.com
>>> You can reach the person managing the list at
>>> chirp_users-owner at intrepid.danplanet.com mailto:chirp_users-owner at intrepid.danplanet.com
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of chirp_users digest..."
>>> Today's Topics:
>>> 1. Re: I get an "unknown file format" when importing (Eric Oyen)
>>> 2. Re: Chirp does not work on my Baofeng UV-5R radio, I am
>>> deleting the program!!! (Eric Oyen)
>>> 3. Re: I get an "unknown file format" when importing
>>> (D.J.J. Ring, Jr.)
>>> 4. Help - Programing ICOM handheld IC-2GXET and IC-T7E (Allan Carson)
>>> 5. Re: I get an "unknown file format" when importing
>>> (Nigel A. Gunn G8IFF/W8IFF)
>>> 6. Re: I get an "unknown file format" when importing (Glenn K0LNY)
>>> 7. Re: I get an "unknown file format" when importing
>>> (Nigel A. Gunn G8IFF/W8IFF)
>>> ----------------------------------------------------------------------
>>> Message: 1
>>> Date: Mon, 22 Mar 2021 23:08:39 -0700
>>> From: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F at icloud.com mailto:2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F at icloud.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >> wrote:
>>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>>> Steps I?ve taken:
>>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>>> Exported memories to a CSV file
>>>>> Added the new frequencies to the CSV file
>>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>>> What am I missing?
>>>>> Thanks for any help!
>>>>> Steve
>>>>> KF0CPV
>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com mailto:eric.oyen at icloud.com <mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com >
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com >
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210322/3920f6a7/attachment-0001.html
>>> ------------------------------
>>> Message: 2
>>> Date: Mon, 22 Mar 2021 23:20:55 -0700
>>> From: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com >
>>> Subject: Re: [chirp_users] Chirp does not work on my Baofeng UV-5R
>>> radio, I am deleting the program!!!
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5 at icloud.com mailto:2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5 at icloud.com >
>>> Content-Type: text/plain; charset=us-ascii
>>> Well, it certainly is handy to have the extra links. Always convenient to have local copies just in case. :)
>>> DE N7zzt Eric
>>>> On Mar 19, 2021, at 4:45 AM, Jim Unroe <rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>> On Fri, Mar 19, 2021 at 12:39 AM Glenn K0LNY <glennervin at cableone.net mailto:glennervin at cableone.net > wrote:
>>>>> I only program my UV 5R with Chirp in Linux.
>>>>> Glenn
>>>> My guess would be that is because your programming cable has a
>>>> Prolific type USB-to-Serial chip.
>>>> For Windows you would need to download and install the older Prolific
>>>> v3.2.0.0 device driver.
>>>> https://www.miklor.com/COM/UV_Drivers.php
>>>> For macOS you would have to purchase a 3rd party device driver
>>>> (Catalina and earlier. No Big Sur support yet.).
>>>> https://www.mac-usb-serial.com/
>>>> Linux doesn't need this extra bit of TLC because the device drivers
>>>> are open source (and don't come from the Prolific company).
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> ------------------------------
>>> Message: 3
>>> Date: Tue, 23 Mar 2021 02:59:47 -0400
>>> From: "D.J.J. Ring, Jr." <n1ea at arrl.net mailto:n1ea at arrl.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com >, Discussion of CHIRP
>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID:
>>> <CADO5RbjSUHQBUygWF+3L6u2pTT1=m9ycOgAX18WuFLV+bDW_aA at mail.gmail.com mailto:m9ycOgAX18WuFLV%2BbDW_aA at mail.gmail.com >
>>> Content-Type: text/plain; charset="UTF-8"
>>> If I'm not mistaken, there was an issue of Microsoft Excel not editing
>>> the csv files correctly and when opening such a file up and saving it
>>> again, it introduced errors.
>>> Such errors did NOT occur with the use of LibreOffice (or OpenOffice)
>>> which is available for Windows, Mac OX-X, and Linux.
>>> OpenOffice download: https://www.openoffice.org/download/
>>> LibreOffice download: https://www.libreoffice.org/download/download/
>>> (currently out of order)
>>> LibreOffice download:
>>> http://mirror.internode.on.net/pub/libreoffice/stable/7.1.1/
>>> If Microsoft Excel no longer introduces errors, someone please correct me.
>>> 73
>>> DR
>>> N1EA
>>> On Tue, Mar 23, 2021 at 2:10 AM Eric Oyen via chirp_users
>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>> Steps I?ve taken:
>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>> Exported memories to a CSV file
>>>> Added the new frequencies to the CSV file
>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>> What am I missing?
>>>> Thanks for any help!
>>>> Steve
>>>> KF0CPV
>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net mailto:n1ea at arrl.net
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> ------------------------------
>>> Message: 4
>>> Date: Tue, 23 Mar 2021 12:23:15 +0200
>>> From: Allan Carson <amcarson1000 at gmail.com mailto:amcarson1000 at gmail.com >
>>> Subject: [chirp_users] Help - Programing ICOM handheld IC-2GXET and
>>> IC-T7E
>>> To: chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>> Message-ID:
>>> <CANheJuSYdcmWorN0sQ_Rcyf6H_G05afhNBtOiAWU=HqQWP52rg at mail.gmail.com mailto:HqQWP52rg at mail.gmail.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> Hi Chirp,
>>> Great job you guys are doing there - thanks!
>>> Can you please give me some help - I have a multi-function JiYKR cable
>>> to program my radios, but I can't seem to be able to get in to change or
>>> save any of the settings when I use the 'live' mode on Chirp. Could you
>>> give me some info on how to use the live mode and or suggest any other
>>> versions that I can use to program the IC-2GXET and IC-T7E?
>>> Thanks for your help
>>> 73
>>> Allan - ZS1AL
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/e09b712b/attachment-0001.html
>>> ------------------------------
>>> Message: 5
>>> Date: Tue, 23 Mar 2021 08:45:46 -0400 (EDT)
>>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net mailto:nigel at ngunn.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Eric Oyen <eric.oyen at icloud.com mailto:eric.oyen at icloud.com >, Eric Oyen via chirp_users
>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <1798531439.157211.1616503546336 at email.ionos.com mailto:1798531439.157211.1616503546336 at email.ionos.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> The best way is not to use CSV files at all.
>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>>> DE n7zzt Eric
>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com mailto:rock.unroe at gmail.com mailto:rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>>>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>>>> Steps I?ve taken:
>>>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>>>> Exported memories to a CSV file
>>>>>> Added the new frequencies to the CSV file
>>>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>>>> What am I missing?
>>>>>> Thanks for any help!
>>>>>> Steve
>>>>>> KF0CPV
>>>>>>>> How did you edit the CSV file?
>>>>> What did you change?
>>>>> Did you compare the new CSV file to the original file CSV file using a
>>>>> text editor?
>>>>> Attach both the before and after CSV files to this conversation so
>>>>> that they can be reviewed.
>>>>> The most common cause of trouble is...
>>>>> - The data format of a cell was changed.
>>>>> - The number of commas required at the end of a data row was changed.
>>>>> Jim KC9HI
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net mailto:nigel at ngunn.net www http://www.ngunn.net
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/6698180b/attachment-0001.html
>>> ------------------------------
>>> Message: 6
>>> Date: Tue, 23 Mar 2021 10:37:38 -0500
>>> From: "Glenn K0LNY" <glennervin at cableone.net mailto:glennervin at cableone.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >
>>> Message-ID: <0a9b01d71ffa$7528c450$7001a8c0 at NUCPPYH>
>>> Content-Type: text/plain; charset="utf-8"
>>> Well from the perspective of a screenreader user, I find editing things much easier to make changes in a spreadsheet program outside of Chirp and import them after the changes were made, so I would call that, the better way.
>>> Glenn
>>> ----- Original Message -----
>>> From: Nigel A. Gunn G8IFF/W8IFF
>>> To: Eric Oyen ; Eric Oyen via chirp_users
>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>> Subject: Re: [chirp_users] I get an "unknown file format" when importing
>>> The best way is not to use CSV files at all.
>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>> Steps I?ve taken:
>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>> Exported memories to a CSV file
>>> Added the new frequencies to the CSV file
>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>> What am I missing?
>>> Thanks for any help!
>>> Steve
>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net mailto:nigel at ngunn.net www http://www.ngunn.net
>>> --------------------------------------------------------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Glenn at glennervin at cableone.net mailto:glennervin at cableone.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/bd7bfcce/attachment-0001.html
>>> ------------------------------
>>> Message: 7
>>> Date: Tue, 23 Mar 2021 12:00:29 -0400 (EDT)
>>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net mailto:nigel at ngunn.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com >, Glenn
>>> K0LNY <glennervin at cableone.net mailto:glennervin at cableone.net >
>>> Message-ID: <1865543066.169729.1616515229259 at email.ionos.com mailto:1865543066.169729.1616515229259 at email.ionos.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> Agreed. If you can, use Libre Office rather than a Microsoft product. Excel messes with the empty comma seperated fields at the end of each row.
>>>> On 23/03/2021 11:37 Glenn K0LNY <glennervin at cableone.net mailto:glennervin at cableone.net > wrote:
>>>> Well from the perspective of a screenreader user, I find editing things much easier to make changes in a spreadsheet program outside of Chirp and import them after the changes were made, so I would call that, the better way.
>>>> Glenn
>>>> ----- Original Message -----
>>>> From: Nigel A. Gunn G8IFF/W8IFF mailto:nigel at ngunn.net mailto:nigel at ngunn.net
>>>> To: Eric Oyen mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com ; Eric Oyen via chirp_users mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>>> Subject: Re: [chirp_users] I get an "unknown file format" when importing
>>>> The best way is not to use CSV files at all.
>>>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>>>> DE n7zzt Eric
>>>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe at gmail.com mailto:rock.unroe at gmail.com mailto:rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>>>> <chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com > wrote:
>>>>>>>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>>>>> Steps I?ve taken:
>>>>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>>>>> Exported memories to a CSV file
>>>>>>> Added the new frequencies to the CSV file
>>>>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>>>>> What am I missing?
>>>>>>> Thanks for any help!
>>>>>>> Steve
>>>>>>> KF0CPV
>>>>>>>>>> How did you edit the CSV file?
>>>>>> What did you change?
>>>>>> Did you compare the new CSV file to the original file CSV file using a
>>>>>> text editor?
>>>>>> Attach both the before and after CSV files to this conversation so
>>>>>> that they can be reviewed.
>>>>>> The most common cause of trouble is...
>>>>>> - The data format of a cell was changed.
>>>>>> - The number of commas required at the end of a data row was changed.
>>>>>> Jim KC9HI
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> This message was sent to Eric Oyen at eric.oyen at icloud.com mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com mailto:eric.oyen at icloud.com
>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net mailto:nigel at ngunn.net www http://www.ngunn.net
>>>> ---------------------------------------------
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Glenn at glennervin at cableone.net mailto:glennervin at cableone.net
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net mailto:nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net mailto:nigel at ngunn.net www http://www.ngunn.net
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/09707b12/attachment-0001.html
>>> ------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> End of chirp_users Digest, Vol 147, Issue 8
>>> *******************************************
>>>> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/4c88116f/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Tue, 23 Mar 2021 22:18:09 -0600
> From: JP Bernier <jp.bernier at gmail.com>
> Subject: [chirp_users] WinXP issue
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
> <CAESvpJPSawtqARBfKD0mTBBVdVzKvPe8hEWmhMqY5P=dGf+yOg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi,
> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
> with a long-dead WinXP laptop. The Kenwood had the chronic screen failure
> years ago that I had a weird hair to fix, and did with success! Now I want
> to update the programming. I found a functioning XP laptop and I've jumped
> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
> WInXP, but I got that to work finally (with a deeply buried legacy
> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
> import my current .csv file and put it on the Kenwood. I get: "This
> application has failed to start because the application configuration is
> incorrect. Reinstalling the application may fix the problem" (it doesn't).
> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
> don't know where to find it on the CHIRP website.
>
> Conversely, I have the ancient Kenwood MCP_V7 software successfully
> installed on the XP, but it doesn't seem to import anything at all. Not
> sure the point of software that only reads the radio without the ability to
> import data to upload, but whatever. If anyone knows how to get a .csv
> file into that it would get the job done just as well.
>
> Cheers,
> JP. KF7QJY
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/0ebdd6cb/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Wed, 24 Mar 2021 07:05:53 -0400
> From: John Mehl <ke4egc at gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAP90CoLwKyZMvxPc5pCVnqxJWHPH2-CLzUPYTsJKiNBoLeN=mA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi JP, I don't know if this would help but the current version of CHIRP
> supports the Kewood TM V7. It might be worth trying to see if your
> programming cable will work with it. Just a thought.....John
>
>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier at gmail.com> wrote:
>>
>> Hi,
>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
>> with a long-dead WinXP laptop. The Kenwood had the chronic screen failure
>> years ago that I had a weird hair to fix, and did with success! Now I want
>> to update the programming. I found a functioning XP laptop and I've jumped
>> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
>> WInXP, but I got that to work finally (with a deeply buried legacy
>> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
>> import my current .csv file and put it on the Kenwood. I get: "This
>> application has failed to start because the application configuration is
>> incorrect. Reinstalling the application may fix the problem" (it doesn't).
>> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
>> don't know where to find it on the CHIRP website.
>>
>> Conversely, I have the ancient Kenwood MCP_V7 software successfully
>> installed on the XP, but it doesn't seem to import anything at all. Not
>> sure the point of software that only reads the radio without the ability to
>> import data to upload, but whatever. If anyone knows how to get a .csv
>> file into that it would get the job done just as well.
>>
>> Cheers,
>> JP. KF7QJY
>>
>>
>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free.
>> www.avast.com
>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
>> <#m_8937370199243590176_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to John at ke4egc at arrl.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210324/fbc068ea/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Wed, 24 Mar 2021 08:07:44 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CADnO8U5Te1BVjCf57Y_s_ya7JdyBzRwd1GO8Bq2dugUwA9bH5g at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier at gmail.com> wrote:
>>
>> Hi,
>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past with a long-dead WinXP laptop. The Kenwood had the chronic screen failure years ago that I had a weird hair to fix, and did with success! Now I want to update the programming. I found a functioning XP laptop and I've jumped through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to WInXP, but I got that to work finally (with a deeply buried legacy driver)... now I'm trying to install CHIRP on on the XP laptop so I can import my current .csv file and put it on the Kenwood. I get: "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix the problem" (it doesn't). I think a legacy version (2004'ish?) of CHIRP might be the thing, but I don't know where to find it on the CHIRP website.
>>
>> Conversely, I have the ancient Kenwood MCP_V7 software successfully installed on the XP, but it doesn't seem to import anything at all. Not sure the point of software that only reads the radio without the ability to import data to upload, but whatever. If anyone knows how to get a .csv file into that it would get the job done just as well.
>>
>> Cheers,
>> JP. KF7QJY
>
> JP,
>
> You don't have the Microsoft Visual C++ 2008 SP1 Redistributable
> Package installed. See this link on the miklor.com website.
>
> https://www.miklor.com/COM/UV_ErrorMess.php#error20
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 24 Mar 2021 08:02:12 -0600
> From: JP Bernier <jp.bernier at gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
> <CAESvpJMY-MoOqLWonEQ7+7Znd-xUTJVBS3oucTiRJjJ6g_wHFg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks Jim, I'll give that a shot.
> JP
>
>> On Wed, Mar 24, 2021, 6:09 AM Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier at gmail.com> wrote:
>>> Hi,
>>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
>> with a long-dead WinXP laptop. The Kenwood had the chronic screen failure
>> years ago that I had a weird hair to fix, and did with success! Now I want
>> to update the programming. I found a functioning XP laptop and I've jumped
>> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
>> WInXP, but I got that to work finally (with a deeply buried legacy
>> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
>> import my current .csv file and put it on the Kenwood. I get: "This
>> application has failed to start because the application configuration is
>> incorrect. Reinstalling the application may fix the problem" (it doesn't).
>> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
>> don't know where to find it on the CHIRP website.
>>> Conversely, I have the ancient Kenwood MCP_V7 software successfully
>> installed on the XP, but it doesn't seem to import anything at all. Not
>> sure the point of software that only reads the radio without the ability to
>> import data to upload, but whatever. If anyone knows how to get a .csv
>> file into that it would get the job done just as well.
>>> Cheers,
>>> JP. KF7QJY
>>
>> JP,
>>
>> You don't have the Microsoft Visual C++ 2008 SP1 Redistributable
>> Package installed. See this link on the miklor.com website.
>>
>> https://www.miklor.com/COM/UV_ErrorMess.php#error20
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to JP Bernier at jp.bernier at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210324/7f1e4570/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 147, Issue 9
> *******************************************
More information about the chirp_users
mailing list