[chirp_users] Can't find Com Ports on Windows 10

Joe Pizzi pizzi.joe at gmail.com
Fri Jun 4 08:19:31 PDT 2021


Just change where chirp is attempting to access the radio.

Unless there's a different reason to change the port number. In my
experience, changing the USB port that you're plugged into is the only way
to change the assignment.

Joe Pizzi
KI5LST

On Fri, Jun 4, 2021, 10:14 AM Richard K Parrish <ritchkp at gmail.com> wrote:

> That did it.
>
> Shows the cable plugged into Com 4.  How do I change it to COM 3?
>
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com <
> chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Ken Hansen
> Sent: Friday, June 4, 2021 10:08 AM
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Subject: Re: [chirp_users] Can't find Com Ports on Windows 10
>
> With the cable attached and radio connected, assuming the proper driver is
> installed, you would check the device manager snd click on COM ports to see
> the currently connected serial devices.
>
> The easiest way to call up the device manager is to simply have Win10
> search for it by typing "device manages" on the search field on the task
> bar across the bottom of the screen.
>
> Ken, N2VIP
>
> > On Jun 4, 2021, at 09:20, Richard K Parrish <ritchkp at gmail.com> wrote:
> >
> > How do I find the Com Ports on Windows 10?
> >
> > Get the following error message "could not open port COM3: [Error 2] The
> system cannot find the file specified."
> >
> > Trying to connect to re program a Yaesu FT 50.
> >
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Ken Hansen at ken at n2vip.org To unsubscribe,
> > send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Richard K Parrish at ritchkp at gmail.com To
> unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Joe Pizzi at pizzi.joe at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210604/15492843/attachment.html 


More information about the chirp_users mailing list