[chirp_users] Can't find Com Ports on Windows 10

Richard K Parrish ritchkp at gmail.com
Fri Jun 4 08:13:46 PDT 2021


That did it.

Shows the cable plugged into Com 4.  How do I change it to COM 3?

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Ken Hansen
Sent: Friday, June 4, 2021 10:08 AM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Can't find Com Ports on Windows 10

With the cable attached and radio connected, assuming the proper driver is installed, you would check the device manager snd click on COM ports to see the currently connected serial devices.

The easiest way to call up the device manager is to simply have Win10 search for it by typing "device manages" on the search field on the task bar across the bottom of the screen.

Ken, N2VIP

> On Jun 4, 2021, at 09:20, Richard K Parrish <ritchkp at gmail.com> wrote:
> 
> How do I find the Com Ports on Windows 10?
> 
> Get the following error message "could not open port COM3: [Error 2] The system cannot find the file specified."
> 
> Trying to connect to re program a Yaesu FT 50.  
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ken Hansen at ken at n2vip.org To unsubscribe, 
> send an email to chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Richard K Parrish at ritchkp at gmail.com To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com



More information about the chirp_users mailing list