[chirp_users] Baofeng UV-10R

Chad Reed ellesix at gmail.com
Mon Jul 5 11:52:29 PDT 2021

Gentlemen, looks like I have muscled thru this, managed to get on to the
Baofeng website and download cable drivers and installation instructions.

I appreciate your time.


On Mon, Jul 5, 2021 at 11:34 AM Chad Reed <ellesix at gmail.com> wrote:

> Crud. Okay, the clone window is still up, nothing is happening.  i just
> found an error message, saying could not open port COM4 (error 5) Access is
> denied...  Suggestions??
> On Mon, Jul 5, 2021 at 10:23 AM Jim Unroe <rock.unroe at gmail.com> wrote:
>> On Mon, Jul 5, 2021 at 1:16 PM Chad Reed <ellesix at gmail.com> wrote:
>> >
>> > Hi Bob, thanks for the rapid response, i did not see that particular
>> list. I connected my cord in the hopes of getting my current freq's off my
>> radio, and its been stuck on the "cloning" window for about 5 mins now,
>> nothing happening. Is it normal for things to take that long on the first
>> download to your laptop?
>> >
>> No. This is not normal. It shouldn't take more than 20 seconds to
>> download from your radio into CHIRP.
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chad at ellesix at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
> --
> Chad A. Reed

Chad A. Reed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210705/a7509c7a/attachment.html 

More information about the chirp_users mailing list