[chirp_users] Lighthouse Radio Network HELP!
Steve Lanwermeyer
Wed Jul 14 14:50:50 PDT 2021
I suppose was I’m specifically looking for is assistance with programming the repeater tones into the radios and renaming them using Chirp. Thanks for the links!
> On Jul 13, 2021, at 7:32 PM, Ken Hansen <ken at n2vip.org> wrote:
>
> As noted elsewhere, the radios are pre-programmed for all channels.
>
> The 50X1 mobile:
>
> https://baofengtech.com/product/gmrs-50x1/
>
> Look a bit down the page, there's an overview section that describes the pre-programmed channels.
>
> The V1 HT:
>
> https://baofengtech.com/product/gmrs-v1/
>
> Look a bit down the page, there's an overview section that describes the pre-programmed channels.
>
> Ken
>
>>> On Jul 13, 2021, at 15:58, Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net> wrote:
>>>
>> The radios should come ready programmed from the dealer.
>>
>>
>>> On 13/07/2021 16:31 Steve Lanwermeyer <capedecision at gmail.com> wrote:
>>>
>>>
>>> Thanks so much for the note Nigel.
>>> My wife and I will be sharing a license, as will another couple who are getting a license, and another volunteer member will be getting a license as well.
>>>
>>> I’ll be using a Mac to work with Chirp.
>>>
>>> We’ve ordered three BTech V1s and BTech 50X1, as well as a Retevis RT97 from myGMRS.com and are looking for someone to write the Chirp files that we can upload into the radios so that they’ll all work together, as opposed to trying to program them on our own.
>>>
>>> Is this something that you might be able to help us with? I can get the channels programmed into the repeater from myGMR.com or I’ll see them for myself on Friday!
>>> Thanks again, hope to hear back from you!
>>> Steve
>>>
>>>
>>>>>> On Jul 13, 2021, at 2:05 PM, Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net> wrote:
>>>> Chirp you download from here:https://trac.chirp.danplanet.com/chirp_daily/LATEST/
>>>> Can't send you the file as you didn't say which computer OS you were using.
>>>>
>>>> To use GMRS, all of those users NOT in your immediate family (and you) will need to apply for a GMRS license from the FCC. GMRS is only for non-commercial use. You might be better looking at MURS.
>>>>
>>>> Whichever, you will need type approved, pre-programmed radios, not generic Baofengs or similar.
>>>>
>>>> The rules seem somewhat undefined on repeater hardware except that you are limited to 50 watts.
>>>>
>>>>
>>>>
>>>>> On 13/07/2021 14:34 Steve Lanwermeyer <capedecision at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hello there!
>>>>> I represent a group that has been restoring the Cape Decision Lighthouse in southeast Alaska for the past twenty years, and one of our projects this summer is to establish a GMRS radio network on our property.
>>>>> The radios are all getting shipped to Alaska now, but the person who was going to help us program them is no longer available! I am writing to see if anyone here might be willing to help us, potentially by writing and sending us the Chirp files needed to get us up and running. There is no internet or cell coverage where we’re going, but I’ll have a brief opportunity this coming Friday to sit with the radios and a computer and Chirp before we leave for the lighthouse on Saturday.
>>>>> The system includes:
>>>>> (3) Baofeng handhelds
>>>>> (1) Baofeng mobile base
>>>>> (1) Retivis repeater
>>>>> I can send send more details about makes and models and any other information you may require! My hope is that someone on this list can can help ensure that the base station and handhelds and repeater can all communicate with each other with Chirp files I can easily upload into each radio.
>>>>> Please send word, and thanks so very much! Happy to make a donation somewhere to get this done in time...
>>>>> Thanks for your consideration!
>>>>> Steve
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Cape Decision Lighthouse at capedecision at gmail.com
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Ken Hansen at ken at n2vip.org
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Cape Decision Lighthouse at capedecision at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210714/791932ec/attachment.html
More information about the chirp_users
mailing list