[chirp_users] FT-70D -> Failed to communicate with the radio: Radio did not ack block 1
Nigel A. Gunn G8IFF/W8IFF
Thu Jul 8 13:01:20 PDT 2021
Works for me under Linux and Windows, HOWEVER, Chirp doesn't include digital (Fusion) as a valid mode so you're lefy with analogue FM only.
The Yaesu Windows software works OK but doesn't allow for the programming of Wires-X faciliries.
> On 08/07/2021 15:55 Charles Beaudette via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>
>
> Hi Team
> I’m using Yaesu FT-70D. I can download radio settings fine. Cannot upload, and I get the error: Failed to communicate with the radio: Radio did not ack block 1
>
> CHIRP daily-20210706
> Using Yaesu factor USB cable
> Mac OS Big Sur 11.4, Intel Core i7 processor
>
> Sounds remarkably like issue #8933 which is closed!!! But no matter what I did cannot get it to upload.
> Tried on two different FT-70D and same result.
>
> Log:
> ...
> [2021-07-08 15:47:37,894] chirp.ui.memedit - INFO: Comment supported: False
> /private/var/folders/vn/2nmhrrr101z1qkv7ljw94s8c0000gn/T/AppTranslocation/BC75122E-5F01-4BEB-A2FF-643943EBFA44/d/CHIRP.app/Contents/MacOS/../Resources/chirp/chirpw:153: GtkWarning: Attemptin$
> gtk.main()
> /private/var/folders/vn/2nmhrrr101z1qkv7ljw94s8c0000gn/T/AppTranslocation/BC75122E-5F01-4BEB-A2FF-643943EBFA44/d/CHIRP.app/Contents/MacOS/../Resources/chirp/chirpw:153: GtkWarning: Attemptin$
> gtk.main()
> [2021-07-08 15:47:54,652] chirp.ui.mainapp - DEBUG: Opening port after pre_upload prompt.
> [2021-07-08 15:48:01,292] chirp.ui.clone - DEBUG: Clone thread started
> [2021-07-08 15:48:01,351] chirp.drivers.yaesu_clone - DEBUG: Sending 0-10
> [2021-07-08 15:48:01,627] chirp.ui.reporting - DEBUG: Reporting exception
> [2021-07-08 15:48:01,627] chirp.ui.common - ERROR: -- Exception: --
> [2021-07-08 15:48:01,627] chirp.ui.common - ERROR: Traceback (most recent call last):
> File "/private/var/folders/vn/2nmhrrr101z1qkv7ljw94s8c0000gn/T/AppTranslocation/BC75122E-5F01-4BEB-A2FF-643943EBFA44/d/CHIRP.app/Contents/Resources/chirp/chirp/ui/clone.py", line 253, in r$
> self.__radio.sync_out()
> File "/private/var/folders/vn/2nmhrrr101z1qkv7ljw94s8c0000gn/T/AppTranslocation/BC75122E-5F01-4BEB-A2FF-643943EBFA44/d/CHIRP.app/Contents/Resources/chirp/chirp/drivers/yaesu_clone.py", lin$
> _clone_out(self)
> File "/private/var/folders/vn/2nmhrrr101z1qkv7ljw94s8c0000gn/T/AppTranslocation/BC75122E-5F01-4BEB-A2FF-643943EBFA44/d/CHIRP.app/Contents/Resources/chirp/chirp/drivers/yaesu_clone.py", lin$
> raise errors.RadioError("Failed to communicate with the radio: %s" % e)
> RadioError: Failed to communicate with the radio: Radio did not ack block 1
>
> Thanks in advance!!
> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
More information about the chirp_users
mailing list