[chirp_users] Baofeng UV-10R

[Chad Reed]

Hi Bob, thanks for the rapid response, i did not see that particular list.
I connected my cord in the hopes of getting my current freq's off my radio,
and its been stuck on the "cloning" window for about 5 mins now, nothing
happening. Is it normal for things to take that long on the first download
to your laptop?

On Mon, Jul 5, 2021 at 9:44 AM Robert Ankenbauer <bobank03 at gmail.com> wrote:

> Chad,
>
> It should work
>
> https://chirp.danplanet.com/projects/chirp/wiki/Home
>
>    - UV-10R *(use BF-F8HP 3 power levels)*
>
> Thanks,
>
> Bob KA1TTG
>
>
>
>
> On Mon, Jul 5, 2021 at 12:37 PM Chad Reed <ellesix at gmail.com> wrote:
>
>> Good day. I have the above radio, someone suggested that I go thru Chirp
>> to program my radio. Done fairly well so far, other than my radio is not
>> listed. the 9R is, but no 10R.  If there are any 10R users out there, what
>> have you been doing to program? Did you use the 9R interface?
>>
>> Thanks
>>
>> --
>> Chad A. Reed
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Bob at bobank03 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chad at ellesix at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com



-- 
Chad A. Reed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210705/1e041bf2/attachment.html