[chirp_users] channel mode issues

Jim Unroe rock.unroe at gmail.com
Sun Jan 10 07:51:26 PST 2021


On Sun, Jan 10, 2021 at 10:35 AM Tall Pine Construction
<tallpineomaha at gmail.com> wrote:
>
> i looked thru faqs and lists didnt find info. i have 2 Baofeng uv-82hp radios and they will not switch to channel mode. i hold down menu button and switch off/on power. powers up everytime in frequency mode. i uploaded info to radios using chirp and can download from radios.

This is most likely due to you performing a RESET on one or both of
the radios. Performing a menu 40 (RESET) on a UV-82HP switches the
radio to VFO mode and disables the "VFO/MR Switching" setting. Don't
ever perform a RESET on a UV-82HP unless you have a computer running
CHIRP and a working programming cable close by.

After download from the UV-82HP, CHIRP inherits this VFO/MR Setting as
"disabled". Until you enable the setting in CHIRP, uploading the image
into any UV-82HP radio will disable the setting preventing the radio
from switching between VFO and MR modes.

Settings -> Advanced Settings -> VFO/MR Switching (BTech UV-82HP only). [X]

Jim KC9HI



More information about the chirp_users mailing list