[chirp_users] Wouxun kguv9p

Joe Pizzi pizzi.joe at gmail.com
Sat Feb 13 17:24:54 PST 2021


There is no February 29th this year.

Joe Pizzi
KI5LST

On 2/11/2021 8:17 AM, george monks wrote:
> Rudolph
> I
> uploaded two frequencies 144.98750 and 448.98750 that was on the phone 
> originally from the factory using the wouxun software and a few more 
> and guess what. It scans all Chanel’s!!!!!!  I then went to chirp 
> software and kept those two original channels in channel 1-2 plus 100 
> more.   It uploaded fine!!
> And scanned.   Don’t understand why those first two freq had to be in 
> channel 1 and 2
> Oh well.   Thanks for helping a newbie.  I’m taking tech test feb 29th 
> <x-apple-data-detectors://0>
>
> Sent from my iPhone
> George Monks
> 2012133231
>
>> On Feb 10, 2021, at 11:58 PM, george monks <monksgeo at gmail.com> wrote:
>>
>>  I designated all  the weather Chanel’s to “s”under skip and the 
>> results occur.   I sent the retailer (two way radio” in sc the chirp 
>> saved file and they got it upload  and scan perfectly.   Really weird
>>
>> Sent from my iPhone
>> George Monks
>>
>>> On Feb 10, 2021, at 11:22 PM, Rudolph Gutzerhagen 
>>> <rudolph.gutzerhagen at gmail.com> wrote:
>>>
>>> 
>>> i get the impression from looking at the driver code that *"S"* on 
>>> the Chirp side means *SKIP* this channel during a scan operation.  
>>> The Chirp value is set in the Radio as '1'  ON for scan, and '0' OFF 
>>> for skip I believe.
>>>
>>> It's always possible that the meanings get mixed up; that is a long 
>>> explanation, but you should observe consistent results from run to 
>>> run without things mixing up between runs.
>>>
>>>
>>> On Wed, Feb 10, 2021 at 10:55 PM george monks <monksgeo at gmail.com 
>>> <mailto:monksgeo at gmail.com>> wrote:
>>>
>>>     Actually I didnt do anything with the skip column.  I imported
>>>     some of chirps preloaded frequencies like the weather channels
>>>     and frs and murs freq.  the radio only scans a few channels. 
>>>     Does the  “S” in the skip mean “scan” or skip?  That may be my issue
>>>
>>>     Sent from my iPhone
>>>     George Monks
>>>
>>>>     On Feb 10, 2021, at 10:33 PM, Rudolph Gutzerhagen
>>>>     <rudolph.gutzerhagen at gmail.com
>>>>     <mailto:rudolph.gutzerhagen at gmail.com>> wrote:
>>>>
>>>>     
>>>>     Are you suggesting that you filled in the skip column
>>>>     appropriately and that the image Chirp sent to the radio
>>>>     doesn't work properly for those channel settings?
>>>>
>>>>
>>>>     On Wed, Feb 10, 2021 at 9:50 PM george monks
>>>>     <monksgeo at gmail.com <mailto:monksgeo at gmail.com>> wrote:
>>>>
>>>>         Used latest version of chirp for win10 to add channels my
>>>>         new radio   It will not scan in channel mode.  It only
>>>>         scans channel 1,2 and 3. Even tho chirp uploaded 117
>>>>         channels into radio. Any help would be appreciated
>>>>
>>>>         Sent from my iPhone
>>>>         George Monks
>>>>         _______________________________________________
>>>>         chirp_users mailing list
>>>>         chirp_users at intrepid.danplanet.com
>>>>         <mailto:chirp_users at intrepid.danplanet.com>
>>>>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>         <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>>>         This message was sent to Rudolph Gutzerhagen at
>>>>         rudolph.gutzerhagen at gmail.com
>>>>         <mailto:rudolph.gutzerhagen at gmail.com>
>>>>         To unsubscribe, send an email to
>>>>         chirp_users-unsubscribe at intrepid.danplanet.com
>>>>         <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>>>
>>>>     _______________________________________________
>>>>     chirp_users mailing list
>>>>     chirp_users at intrepid.danplanet.com
>>>>     <mailto:chirp_users at intrepid.danplanet.com>
>>>>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>     <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>>>     This message was sent to george w monks at monksgeo at gmail.com
>>>>     <mailto:monksgeo at gmail.com>
>>>>     To unsubscribe, send an email to
>>>>     chirp_users-unsubscribe at intrepid.danplanet.com
>>>>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>>     _______________________________________________
>>>     chirp_users mailing list
>>>     chirp_users at intrepid.danplanet.com
>>>     <mailto:chirp_users at intrepid.danplanet.com>
>>>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>     <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>>     This message was sent to Rudolph Gutzerhagen at
>>>     rudolph.gutzerhagen at gmail.com <mailto:rudolph.gutzerhagen at gmail.com>
>>>     To unsubscribe, send an email to
>>>     chirp_users-unsubscribe at intrepid.danplanet.com
>>>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to george w monks at monksgeo at gmail.com
>>> To unsubscribe, send an email to 
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Joe Pizzi at pizzi.joe at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210213/b580e9d9/attachment.html 


More information about the chirp_users mailing list