[chirp_users] Wouxun kguv9p

Rudolph Gutzerhagen rudolph.gutzerhagen at gmail.com
Wed Feb 10 20:20:20 PST 2021


i get the impression from looking at the driver code that *"S"* on the
Chirp side means *SKIP* this channel during a scan operation.  The Chirp
value is set in the Radio as '1'  ON for scan, and '0' OFF for skip I
believe.

It's always possible that the meanings get mixed up; that is a long
explanation, but you should observe consistent results from run to run
without things mixing up between runs.


On Wed, Feb 10, 2021 at 10:55 PM george monks <monksgeo at gmail.com> wrote:

> Actually I didnt do anything with the skip column.  I imported some of
> chirps preloaded frequencies like the weather channels and frs and murs
> freq.  the radio only scans a few channels.  Does the  “S” in the skip mean
> “scan” or skip?  That may be my issue
>
> Sent from my iPhone
> George Monks
>
> On Feb 10, 2021, at 10:33 PM, Rudolph Gutzerhagen <
> rudolph.gutzerhagen at gmail.com> wrote:
>
> 
> Are you suggesting that you filled in the skip column appropriately and
> that the image Chirp sent to the radio doesn't work properly for those
> channel settings?
>
>
> On Wed, Feb 10, 2021 at 9:50 PM george monks <monksgeo at gmail.com> wrote:
>
>> Used latest version of chirp for win10 to add channels my new radio   It
>> will not scan in channel mode.  It only scans channel 1,2 and 3. Even tho
>> chirp uploaded 117 channels into radio. Any help would be appreciated
>>
>> Sent from my iPhone
>> George Monks
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Rudolph Gutzerhagen at
>> rudolph.gutzerhagen at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to george w monks at monksgeo at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Rudolph Gutzerhagen at
> rudolph.gutzerhagen at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210210/8fd1ae22/attachment.html 


More information about the chirp_users mailing list