[chirp_users] Dual band

[Thomas Weiss]

If you want the appearance of a VHF bank and a UHF bank, you could put the
VHF frequencies in memories 1-64 and UFH frequencies in memories 65-128,
then just keep A in the top half of memories and B in the bottom half of
the memories.

On Tue, Feb 16, 2021 at 9:50 AM John LaMartina <JohnLa at usa.net> wrote:

> A UV5R only has one channel bank.
> The channels cannot be separated into two sections.
>
>
> On Feb 16, 2021, at 8:35 AM, Eric Evans <e.evans1369 at gmail.com> wrote:
>
> 
> Programming a dual band with band A being VHF and band B being UHF, how do
> I set up Band B for programming. Using a UV5R.
> Thanks,
> K4NDN
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John LaMartina at johnla at usa.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to thomasweiss3 at gmail.com at thomasweiss3 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210216/ef44e8d1/attachment.html