[chirp_users] Clone for BaoFeng 10W?

[Jay Trobec]

Bob:
Perfect! Thank you.
Jay


On Wed, Feb 3, 2021, 05:08 Robert Ankenbauer <bobank03 at gmail.com> wrote:

> Jay,
>
> Under supported radios
>
> https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios
>
> The UV-S9 should work if you use the BF-F8HP
>
>
> Thanks,
>
> Bob
>
>
>
>
> On Tue, Feb 2, 2021 at 9:11 PM Jay Trobec <jay at trobec.net> wrote:
>
>> Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W?
>> I've been trying various options but haven't been able to find anything
>> that works.
>> JT
>>
>> On Tue, Feb 2, 2021 at 8:06 PM Jay Trobec <jay at trobec.net> wrote:
>>
>>> Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W?
>>> I've been trying various options but haven't been able to find anything
>>> that works.
>>> JT
>>>
>>
>>
>> --
>> *Jay Trobec, Ph.D., CBM, CCM*
>>
>> Chief Meteorologist, KELO-TV
>> 501 South Phillips Ave
>> Sioux Falls, SD 57104
>> (605) 610-8414
>> jaytrobec.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Bob at bobank03 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jay Trobec at jay at trobec.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210203/1fad846f/attachment.html