[chirp_users] chirp_users Digest, Vol 152, Issue 12

JOHN E BECK Sr kd2wgn at gmail.com
Fri Aug 27 08:27:48 PDT 2021


I don’t know if this is the proper forum to raise an issue regarding CHIRP on MacBook Pro (Mac OS 11.5.2 Big Sur) but I need help in getting CHIRP to work with regard to interfacing uploads/downloads to my F8-HP HT.  If it is not, please provide me with a means by which I can state my problem in detail and track a resolution.

Thank  you.

KD2WGN




> On Aug 26, 2021, at 7:07 PM, Eric Chopin <echopin27 at gmail.com> wrote:
> 
> Yaesu FT270 H/H
> 
> Greetings, so far I have used CHIRP with 100% success in programming many radios.
> What I REALLY need is being able to program the YAESU FT270 Hand Held.
> When is one of you brilliant guys going to update CHIRP with this radio?
> 
> Thanks
> VE7ECJ
> 
> On Sun, Aug 22, 2021 at 12:01 PM <chirp_users-request at intrepid.danplanet.com <mailto:chirp_users-request at intrepid.danplanet.com>> wrote:
> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com <mailto:chirp_users-request at intrepid.danplanet.com>
> 
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com <mailto:chirp_users-owner at intrepid.danplanet.com>
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: UV5X Programming issue (White Ranger)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sat, 21 Aug 2021 14:33:09 -0500
> From: White Ranger <cortchubby20007 at gmail.com <mailto:cortchubby20007 at gmail.com>>
> Subject: Re: [chirp_users] UV5X Programming issue
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>>
> Message-ID:
>         <CAP+N95FGwe=VRT21Yd+EiDSjhknL0j_xGhMZqD7PEJXniiT93Q at mail.gmail.com <mailto:VRT21Yd%2BEiDSjhknL0j_xGhMZqD7PEJXniiT93Q at mail.gmail.com>>
> Content-Type: text/plain; charset="utf-8"
> 
> Radio should be ON when up or downloading.
> Remove the driver and cable program, reboot PC reload driver
> SHOULD correct issue. If using aftermarket cable check to see contacts are
> CLEAN (*shiny) and fit TIGHTLY into the mike provisioning adapter (Mic
> jack) DO NOT touch ANY buttons while programming. Worst case, prior to
> programming RESET the radio to factory resets then load your amended
> program.
> 
> On Thu, Aug 19, 2021 at 2:03 PM Jim Unroe <rock.unroe at gmail.com <mailto:rock.unroe at gmail.com>> wrote:
> 
> > Hi Eric,
> >
> > On Thu, Aug 19, 2021 at 12:47 PM Eric Chopin <echopin27 at gmail.com <mailto:echopin27 at gmail.com>> wrote:
> > >
> > > UV5XP....
> > >     However to get CHIRP to see the radio either in the 'Download from
> > radio'
> > >     or 'Upload to radio' ... with the cable plugged in to my PC or my
> > MAC, the
> > >     radio must me switched OFF...then as I select 'Download or upload'
> > as I
> > >     select 'OK' i must immediately switch ON my radio then CHIRP sees it
> > and
> > >     proceeds. If I try to 'Download or upload' with the radio already
> > switched
> > >     on I get the message 'The radio did not respond' as CHIRP cannot see
> > it
> > >     connected.
> > >     Any suggestions?
> > >     Thanks
> > >     VE7ECJ
> >
> > That sounds like a programming cable/driver issue. Also, to program
> > that radio you must choose...
> >
> > Vendor: Radioddity
> > Model: UV-5G
> >
> > Jim KC9HI
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> > This message was sent to cortchubby20007 at gmail.com <mailto:cortchubby20007 at gmail.com> at
> > cortchubby20007 at gmail.com <mailto:cortchubby20007 at gmail.com>
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html <http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html> 
> 
> ------------------------------
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
> 
> End of chirp_users Digest, Vol 152, Issue 12
> ********************************************
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John E Beck at kd2wgn at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210827/bdd57aaa/attachment.html 


More information about the chirp_users mailing list