[chirp_users] Interference

Glenn K0LNY glennervin at cableone.net
Tue Apr 6 21:14:14 PDT 2021


Can you explain the interference?
Does your signal not get out, or are you having trouble receiving?
It could be the antenna, or you might have it set on low power.
Glenn
----- Original Message ----- 
From: "zeb doz" <zardoz123456 at gmail.com>
To: <chirp_users at intrepid.danplanet.com>
Sent: Tuesday, April 06, 2021 10:40 PM
Subject: [chirp_users] Interference


Interference when I use my baofeng 5 be would structures and trees cause 
that?

Sent from my iPhone

> On Apr 6, 2021, at 2:01 PM, chirp_users-request at intrepid.danplanet.com 
> wrote:
>
> Send chirp_users mailing list submissions to
>    chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>    chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>    chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>   1. Help with "Baofeng UV-5R A3" HT (n6mg at verizon.net)
>   2. Re: Help with "Baofeng UV-5R A3" HT (Nigel A. Gunn  G8IFF/W8IFF)
>   3. Re: Help with "Baofeng UV-5R A3" HT (D.J.J. Ring, Jr.)
>   4. Re: Help with "Baofeng UV-5R A3" HT (Glenn K0LNY)
>   5. Re: Debian Chirp Daily (D.J.J. Ring, Jr.)
>   6. Re: Help with "Baofeng UV-5R A3" HT (Jim Unroe)
>   7. Re: Help with "Baofeng UV-5R A3" HT (n6mg at verizon.net)
>   8. New Daily Build (Build System)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 5 Apr 2021 20:14:45 +0000 (UTC)
> From: n6mg at verizon.net
> Subject: [chirp_users] Help with "Baofeng UV-5R A3" HT
> To: "chirp_users at intrepid.danplanet.com"
>    <chirp_users at intrepid.danplanet.com>
> Message-ID: <1073346771.28903.1617653685954 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> My 1st time to post. Be gentle please?I have a new, Baofeng UV5R A3 
> Triband HT, (2m/220/70cm).What software covers this model? I've tried the 
> UV-5R software, but it won't let me enter a 220 MHz freq without telling 
> me that 220 MHz. is not supported on that version of the 
> software.Thanks,Milt.N6MG
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/f108f239/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Mon, 5 Apr 2021 16:28:17 -0400 (EDT)
> From: "Nigel A. Gunn  G8IFF/W8IFF" <nigel at ngunn.net>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT
> To: n6mg at verizon.net,    Milton via chirp_users
>    <chirp_users at intrepid.danplanet.com>
> Message-ID: <604544502.399600.1617654497283 at email.ionos.com>
> Content-Type: text/plain; charset=UTF-8
>
> BTECH UV-5X3 possibly.
>
>> On 05/04/2021 16:14 Milton via chirp_users 
>> <chirp_users at intrepid.danplanet.com> wrote:
>>
>>
>> My 1st time to post. Be gentle please?
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).
>> What software covers this model? I've tried the UV-5R software, but it 
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not 
>> supported on that version of the software.
>> Thanks,
>> Milt.
>> N6MG
>> _______________________________________________ chirp_users mailing list 
>> chirp_users at intrepid.danplanet.com 
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message 
>> was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an 
>> email to chirp_users-unsubscribe at intrepid.danplanet.com
>
> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www 
> http://www.ngunn.net
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 5 Apr 2021 16:28:07 -0400
> From: "D.J.J. Ring, Jr." <n1ea at arrl.net>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT
> To: n6mg at verizon.net, Discussion of CHIRP
>    <chirp_users at intrepid.danplanet.com>
> Message-ID:
>    <CADO5RbjdukHBfkEr_XyfHeWEwQY_HduX-2EadyVDBK2TUuvH_w at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> The only tri-band Baofeng that is supported that I can find is UV-RX3.
>
>   - UV-5RX3 *(use Radioddity UV-5RX3)*
>
> Try the Radioddity UV-5RX3 and see if you can download an img file, if so
> save it so you have something to go back to if you need to re-image the
> radio.
>
> Best wishes,
>
> David (just a user)
>
> N1EA
>
>> On Mon, Apr 5, 2021 at 4:16 PM Milton via chirp_users <
>> chirp_users at intrepid.danplanet.com> wrote:
>>
>> My 1st time to post. Be gentle please?
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).
>> What software covers this model? I've tried the UV-5R software, but it
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not
>> supported on that version of the software.
>> Thanks,
>> Milt.
>> N6MG
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/46b1f433/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Mon, 5 Apr 2021 15:29:55 -0500
> From: "Glenn K0LNY" <glennervin at cableone.net>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT
> To: <n6mg at verizon.net>,    "Discussion of CHIRP"
>    <chirp_users at intrepid.danplanet.com>
> Message-ID: <01c501d72a5a$7128ee10$7001a8c0 at NUCPPYH>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Milton,
> The same software that this list  is all about.
> Chirp.
> Glenn
> ----- Original Message ----- 
> From: Milton via chirp_users
> To: chirp_users at intrepid.danplanet.com
> Sent: Monday, April 05, 2021 3:14 PM
> Subject: [chirp_users] Help with "Baofeng UV-5R A3" HT
>
>
> My 1st time to post. Be gentle please?
> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).
> What software covers this model? I've tried the UV-5R software, but it 
> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not 
> supported on that version of the software.
> Thanks,
> Milt.
> N6MG
>
>
> --------------------------------------------------------------------------------
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/0e459d28/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Mon, 5 Apr 2021 16:52:55 -0400
> From: "D.J.J. Ring, Jr." <n1ea at arrl.net>
> Subject: Re: [chirp_users] Debian Chirp Daily
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>    <CADO5Rbg1OCDWGORWLb1umCodMCbw5ozk_YaE5bgby1OJdoNzCA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Still working on getting a current version of CHIRP on Debian Stable.
>
> Here's the latest.
>
> flatpak uninstall chirp
> Found installed ref ?app/com.danplanet.chirp/x86_64/master? (system). Is
> this correct?
> [Y/n]: y
> error: Remote "chirp-origin" not found
>
> I have tried to install (or reinstall) chirp using flatpak and I've been
> confused and unfulfilled.
>
> I did find this script on this page
> https://piratesinteepees.org/installing-chirp-in-ubuntu-20-04/
>
> #####
>
> #!/bin/bash
> #
> #
> # This script updats chirp flatpak to latest daily build
> # Add this to root's crontab for automatic updates
> # If run as standard user, you will get a popop asking for admin password
> #
> #
> #Make download folder if doesn't exist
> mkdir -p ~/Downloads/ChirpFP
> #Move to Download folder
> cd ~/Downloads/ChirpFP
> #Remove previously downloaded flatpaks
> rm *.flatpak
> #Pull link from download page and download latest flatpak
> wget `lynx -dump https://trac.chirp.danplanet.com/chirp_daily/LATEST/ | 
> awk
> '/http/{print $2}' | grep flatpak`
> #Install the file
> flatpak install -y --noninteractive *.flatpak
>
> #####
>
> I tried it, but alas, I still get the cryptic error: Remote "chirp-origin"
> not found
>
> I am still confused and lost.
>
> Does anyone know how I can uninstall what seems to be a flatpak
> installation on Debian?
>
> If I try to update, I receive this error.
>
> $ flatpak update
> Looking for updates?
> Unable to update app/com.danplanet.chirp/x86_64/master: Remote
> "chirp-origin" not found
>
> Best wishes,
> David N1EA
>
>
>
>> On Wed, Mar 31, 2021 at 7:43 PM D.J.J. Ring, Jr. <n1ea at arrl.net> wrote:
>>
>> AC0HY, I agree with you, I thought the new chirp-daily would overwrite 
>> the
>> previous chirp-daily and maybe it would be I have no memory of whether I
>> used a flatpak or used the danplanet repository.
>> ,
>> If anyone would have a suggestion of how I could get rid of it the
>> duplicate chirp, I'd be grateful.
>>
>> chirp --version
>>
>> CHIRP daily-20201221 on Linux - Debian GNU/Linux 10 (Python 2.7.16)
>>
>> $ which chirpw
>> /usr/bin/chirpw
>>
>> apt purge chirpw
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> E: Unable to locate package chirps
>>
>> # apt purge chirp-daily
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> The following package was automatically installed and is no longer
>> required:
>>  python-libxslt1
>> Use 'apt autoremove' to remove it.
>> The following packages will be REMOVED:
>>  chirp-daily*
>> 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
>> After this operation, 4,622 kB disk space will be freed.
>>
>> Now I try chirpw and it seems I have a chirpw in a different place that I
>> chmod -x so it could not execute.
>>
>> -bash: /usr/local/bin/chirpw: Permission denied
>> root at debian:~# chmod +x /usr/local/bin//chirpw
>> root at debian:~# chirpw
>> WARNING: python-future package is not available;
>> chirp.drivers.anytone778uv requires it
>>
>> I forget what I just did but whatever I just did, now chirp runs, but 
>> it's
>> the OLD version:
>> CHIRP daily-20201221
>>
>> Trying to purge both chirp and chirp-daily fail - apt says it's not
>> installed.
>>
>> Ran updatedb as root then, as user:
>> locate chirp > ~/chirpfiles
>> File attached.
>>
>> Anyone got a clue how I can get rid of the chirp I have that I can't
>> uninstall using apt?
>> I don't think I installed it from source, but I may have because I
>> couldn't find a deb file to install in Debian, but that would have been
>> before January 2021, and I have aging memory capacities these days. My
>> md5sum memory brain comes out like: "Peas porridge hot, peas
>> porridge cold..." and starts playing Patty Cake.  It's part of life, but
>> when you go into the kitchen twice to get a spoon and return twice 
>> without
>> it, it's embarrassing. Thankfully my cat hasn't caught on yet.
>>
>> Best wishes,
>> David
>>
>>
>>
>>
>>
>>
>>> On Wed, Mar 31, 2021 at 7:20 PM W Paul Mills <ac0hy at wpmills.com> wrote:
>>>
>>> That is right, but they conflict. DO NOT INSTALL BOTH. The reason for 
>>> the
>>> error you get is because you have attempted to install both. Just 
>>> because
>>> they are in package manager (from different repositories) does not mean 
>>> you
>>> should install both.
>>>
>>> The error is telling you that this is the problem.
>>>
>>>> On 3/31/21 5:58 PM, Tony Ling wrote:
>>>
>>> They appear both on Synaptic Package Manager on my system.
>>>
>>>> On Wed, 31 Mar 2021 at 23:55, W Paul Mills <ac0hy at wpmills.com> wrote:
>>>
>>>> The packages chirp & chirp-daily conflict with each other. Uninstall
>>>> chirp, then install chirp-daily.
>>>>
>>>> On 3/31/21 4:13 PM, D.J.J. Ring, Jr. wrote:
>>>>
>>>> More info!
>>>>
>>>> apt install chirp
>>>> Reading package lists... Done
>>>> Building dependency tree
>>>> Reading state information... Done
>>>> The following NEW packages will be installed:
>>>>  chirp
>>>> 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
>>>> Need to get 0 B/474 kB of archives.
>>>> After this operation, 3,830 kB of additional disk space will be used.
>>>> Selecting previously unselected package chirp.
>>>> (Reading database ... 265833 files and directories currently 
>>>> installed.)
>>>> Preparing to unpack .../chirp_1%3a20190104-1_amd64.deb ...
>>>> Unpacking chirp (1:20190104-1) ...
>>>> dpkg: error processing archive
>>>> /var/cache/apt/archives/chirp_1%3a20190104-1_amd64.deb (--unpack):
>>>> trying to overwrite '/usr/bin/chirpw', which is also in package
>>>> chirp-daily 20210310~xenial~1
>>>> dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
>>>> Errors were encountered while processing:
>>>> /var/cache/apt/archives/chirp_1%3a20190104-1_amd64.deb
>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>>
>>>> Any suggestions?
>>>>
>>>> 73
>>>> DR
>>>> N1EA
>>>>
>>>> On Wed, Mar 31, 2021 at 4:59 PM D.J.J. Ring, Jr. <n1ea at arrl.net> wrote:
>>>>
>>>>> Hello List,
>>>>>
>>>>> I'm confused.
>>>>>
>>>>> I have added the sources for Chirp daily snapshot to Debian Stable.
>>>>>
>>>>> I install chirp.
>>>>>
>>>>> I ask chirpw --version and I get:
>>>>> CHIRP daily-20201221 on Linux - Debian GNU/Linux 10 (Python 2.7.16)
>>>>>
>>>>> when I try to install again,
>>>>>
>>>>> wajig install chirp-daily
>>>>>
>>>>> install chirp-daily
>>>>> Reading package lists... Done
>>>>> Building dependency tree
>>>>> Reading state information... Done
>>>>> chirp-daily is already the newest version (20210310~xenial~1).
>>>>>
>>>>> How do I get the newest chirp?
>>>>>
>>>>> 73
>>>>> David N1EA
>>>>>
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing 
>>>> listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Paul AC0HY at ac0hy at wpmills.com
>>>> To unsubscribe, send an email to 
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>>
>>>> --
>>>> /**************************************************
>>>> * Amateur Radio Station AC0HY                     *
>>>> * W. Paul Mills         SN807                     *
>>>> * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
>>>> * President Kaw Valley Amateur Radio Club         *
>>>> **************************************************/
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Tony Ling at tonyg7txu at gmail.com
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing 
>>> listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Paul AC0HY at ac0hy at wpmills.com
>>> To unsubscribe, send an email to 
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>>
>>> --
>>> /**************************************************
>>> * Amateur Radio Station AC0HY                     *
>>> * W. Paul Mills         SN807                     *
>>> * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
>>> * President Kaw Valley Amateur Radio Club         *
>>> **************************************************/
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/23035e5e/attachment-0001.html
>
> ------------------------------
>
> Message: 6
> Date: Mon, 5 Apr 2021 17:05:43 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT
> To: n6mg at verizon.net, Discussion of CHIRP
>    <chirp_users at intrepid.danplanet.com>
> Message-ID:
>    <CADnO8U51SwR+ApfVkhaWhxLEFusb8eourh+WLgcVxPmufkYK6Q at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> The rule of thumb for UV-5R like models with...
> - 2 power levels and 2 bands: Baofeng / UV-5R
> - 3 power levels and 2 bands: Baofeng / BF-F8HP
> - 2 power levels and 3 bands: Radioddity / UV-5RX3
>
> Jim KC9HI
>
>> On Mon, Apr 5, 2021 at 4:16 PM Milton via chirp_users
>> <chirp_users at intrepid.danplanet.com> wrote:
>>
>> My 1st time to post. Be gentle please?
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).
>> What software covers this model? I've tried the UV-5R software, but it 
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not 
>> supported on that version of the software.
>> Thanks,
>> Milt.
>> N6MG
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jim at rock.unroe at gmail.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 6 Apr 2021 04:45:13 +0000 (UTC)
> From: n6mg at verizon.net
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT
> To: "rock.unroe at gmail.com" <rock.unroe at gmail.com>,
>    "chirp_users at intrepid.danplanet.com"
>    <chirp_users at intrepid.danplanet.com>
> Message-ID: <656617797.205723.1617684313667 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks to everybody that replied.Setting the software to "Radioddity / 
> UV-5RX3" did the trick.It now allows me to enter 220 MHz frequencies to 
> the software and to write them to the radio.73,Milt.N6MG
>
> -----Original Message-----
> From: Jim Unroe <rock.unroe at gmail.com>
> To: n6mg at verizon.net; Discussion of CHIRP 
> <chirp_users at intrepid.danplanet.com>
> Sent: Mon, Apr 5, 2021 2:05 pm
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT
>
> The rule of thumb for UV-5R like models with...
> - 2 power levels and 2 bands: Baofeng / UV-5R
> - 3 power levels and 2 bands: Baofeng / BF-F8HP
> - 2 power levels and 3 bands: Radioddity / UV-5RX3
>
> Jim KC9HI
>
>> On Mon, Apr 5, 2021 at 4:16 PM Milton via chirp_users
>> <chirp_users at intrepid.danplanet.com> wrote:
>>
>> My 1st time to post. Be gentle please?
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).
>> What software covers this model? I've tried the UV-5R software, but it 
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not 
>> supported on that version of the software.
>> Thanks,
>> Milt.
>> N6MG
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jim at rock.unroe at gmail.com
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210406/e254d53e/attachment-0001.html
>
> ------------------------------
>
> Message: 8
> Date: Tue, 6 Apr 2021 00:10:39 -0700 (PDT)
> From: Build System <donotreply at chirp.danplanet.com>
> Subject: [chirp_users] New Daily Build
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>    <2088156731.39.1617693039600.JavaMail.jenkins at eagle.danplanet.com>
> Content-Type: text/plain; charset="utf-8"
>
> Greetings,
>
> A new daily build of CHIRP is available.  This includes changes made
> directly to the tree yesterday, and may include additional features,
> bug fixes, and/or bugs.  If you are interested in trying it, grab it
> from the following location:
>
>  http://trac.chirp.danplanet.com/chirp_daily/daily-20210406
>
>
> A list of the changes included in this build (since the last daily)
> follows:
>
> Changes for Build #646
> [Dan Smith <dsmith at danplanet.com>] Add a brute force test for model 
> detection
>
> The regular per-image model detection tests are not very well-suited
> for sussing out issues with one image being detected as multiple
> models, and it can be fooled if the right one is returned first from
> the directory. This adds a new unit test that runs through all the
> images and tries to match_model() every driver in the directory against
> them, asserting that not more than one matches any given file.
>
> Also included is a fix to make the unittest adapter use helpfully-
> named test images and makes the existing Detect test report the
> filename of the image it is trying, for easier debug.
>
> #0
>
> [Dan Smith <dsmith at danplanet.com>] Move rt21 match_model() up to the base 
> class
>
> The RT21 lineage has a match_model that clearly intends to be on the
> base class (as it checks for model==RT21), but is actually present
> only on the last subclass in the file. I'm sure this was an accidental
> detaching after the original implementation. After the driver
> maintenance (related to #8957, #8661 and #8959) the detection test
> started noticing this, probably just due to an ordering change.
>
> [Jim Unroe <rock.unroe at gmail.com>] [RT76] Retevis RT76
>
> This patch adds support for the Retevis RT76.
>
> Related to #8959
>
> [Jim Unroe <rock.unroe at gmail.com>] [RB26] Retevis RB26
>
> This patch adds support for the Retevis RB26.
>
> Related to #8661
>
> [Jim Unroe <rock.unroe at gmail.com>] [RB17A] Retevis RB17A
>
> This patch adds support for the Retevis RB17A.
>
> Related to #8957
>
> [Jim Unroe <rock.unroe at gmail.com>] [RT21] Driver Maintenance: 
> retevis_rt21.py
>
> This patch is prepare the driver for adding additional radio models.
>
> 1: fixes some incorrect code
> 2: reformats some code
> 3: allows CHIRP to make 5 attempts at putting radio into programming mode.
>
> Other than for number 3, no features or settings have been added or 
> removed from
> this driver.
>
> Related to #8957, #8661 and #8959
>
> [Rick DeWitt <aa0rd at yahoo.com>] [icomciv] Add IC-7300 Live Mode support, 
> Issue #4013
>
> [Jim Unroe <rock.unroe at gmail.com>] [AT-778UV] Add support model variants 
> that include VOX
>
> This patch adds support for the new model variants that now include VOX:
>
> Anytone AT-778UV VOX 3.0
> Retevis RT95 VOX 2.0
>
> fixes #8859
>
> [Jim Unroe <rock.unroe at gmail.com>] [AT-778UV] Add anytone778uv.py driver 
> to cpep8.manifext
>
> This patch adds the anytone778uv.py driver to the cpep8.manifest in order 
> to
> enable style checking.
>
> related to #8859
>
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 148, Issue 2
> *******************************************
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com 



More information about the chirp_users mailing list