[chirp_users] Programming Retevis R21

John LaMartina JohnLa at usa.net
Fri Sep 25 06:33:15 PDT 2020


Confirm the audio levels are set to Wide Band. 

John
Www.Miklor.com 

> On Sep 25, 2020, at 8:26 AM, bob burks <kc4lb1 at gmail.com> wrote:
> 
> 
> Need some help.  Our church uses these for inter church communication. I have setup the first 20 or 30 ht's no problem.
> I made backup of the program image.
> We are in need of adding more RT21 to the flock.
> My problem is after programming the new ht's everything works etc the transmit audio is extremely low to not at all.
> I also noticed the image file loads back differently by dropping out data. 
> I have changed to the latest Chirp level. And have two programming cables. Nothing changes.
> I use a working ht and when I download the image file it also is not the same as the orginal.
> I have also used 4 different laptops and a table computer. Most are running ein 10.
> I have another laptop running vista sw and the results are the same.
> 
> Any ideas??
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John LaMartina at johnla at usa.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




More information about the chirp_users mailing list