[chirp_users] Chirp, upon read radio memory keys radio

[norcrossjcn at gmail.com]

Since the Kenwood requires echolink mode to key radio w/o VOX it uses RTS
pin to key. I set Radio back to non-echolink and was able to read memories.
Does CHIRP enable RTS pin in serial port when it reads memories? Would seem
so.

Jim WB8EYE

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
<chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Michael Rathbun
Sent: Monday, September 14, 2020 9:22 AM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Chirp, upon read radio memory keys radio

On Mon, 14 Sep 2020 08:44:19 -0400, <norcrossjcn at gmail.com> wrote:

>Chirp, upon read data memory, keys radio Instead of having it go to 
>PROG mode.

With one of the programming cables I use with Baofeng units, the unit keys
up as soon as Chirp accesses it.  Apart from switching cables to one that
doesn't do that, the solution was to make sure the unit was tuned to a
channel where it was set to disallow transmit (e.g. the NWS on 162.55).

mdr

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to James Norcross at norcrossjcn at gmail.com To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com