[chirp_users] Yaesu FT8900R Cloning

[joe]

Thank you for your response.

i do select the serial port (com port).  

I will I’ll have to research as I have never selected a USB port.  I just plug it in to the USB on the computer

thanks again...stay safe and stay healthy

joe

>     On September 7, 2020 2:39 PM D.J.J. Ring, Jr. <n1ea at arrl.net> wrote:
> 
> 
>     You have to select the USB port that your radio is connected to.  
> 
>     73
> 
>     DR
> 
>     On Mon, Sep 7, 2020 at 5:28 PM joe < joe at joeshapley.com mailto:joe at joeshapley.com > wrote:
> 
>         > >         Hi everyone,
> > 
> >         Windows 10 computer
> > 
> >         I am trying to clone the Yaesu FT8900R (this is the first time)
> > 
> >         I use CHIRP and I follow the CHIRP instructions (same as in Yaesu manual)
> > 
> >         I turn on the radio, go to F6 "clone start", then push "set"
> > 
> >         Nothing happens...after a few seconds, I get error message stating it could not find the item location (com port).  Tried several times on all four active ports.
> > 
> >         Checked "device manager" and the four ports are active and well
> > 
> >         Any help or suggestions will be greatly appreciated
> > 
> >         Joe
> >         _______________________________________________
> >         chirp_users mailing list
> >         chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
> >         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> >         This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net mailto:n1ea at arrl.net
> >         To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > 
> >     >     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     This message was sent to joe Shapley at joe at joeshapley.com
>     To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200907/c7e4eeb0/attachment.html