[chirp_users] chirp_users Digest, Vol 142, Issue 8

[Chris Hastie]

Thank you. I will try this. I bought the whole set of radio, microphone and
baofeng program cable. When I check my ports it says ch340 instead of
prolific so that is probably the problem. Again thank you.

On Sat, Oct 24, 2020, 12:00 PM <chirp_users-request at intrepid.danplanet.com>
wrote:

> Send chirp_users mailing list submissions to
>         chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>         chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>         chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>    1. Error 5 (Chris Hastie)
>    2. Re: Error 5 (Jim Unroe)
>    3. Re: Error 5 (Tony Ling)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 23 Oct 2020 13:22:46 -0700
> From: Chris Hastie <c.hastiessho at gmail.com>
> Subject: [chirp_users] Error 5
> To: chirp_users at intrepid.danplanet.com
> Message-ID:
>         <
> CAMSQg99A02iGyGnNRfhFs2RvCWSWz8uP+AOnJnrbebNzPTJrvg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> When I went to my device manager it gave me a com3 comport. When I click on
> the read from radio, it gives me the information of comport 3. I then push
> monitor and push transmit 3 times. after a few seconds I get the error 5
> notice. I have a Baofeng GT-3TP. What am I doing wrong?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201023/15fc7e57/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Fri, 23 Oct 2020 18:13:08 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Error 5
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <
> CADnO8U6AQR7ZgHD-pQDG4weK0jkfAQpvBBnTi02gwFimNaR2MQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> On Fri, Oct 23, 2020 at 4:25 PM Chris Hastie <c.hastiessho at gmail.com>
> wrote:
> >
> > When I went to my device manager it gave me a com3 comport. When I click
> on the read from radio, it gives me the information of comport 3. I then
> push monitor and push transmit 3 times. after a few seconds I get the error
> 5 notice. I have a Baofeng GT-3TP. What am I doing wrong?
>
> Why do you "push monitor" and "push transmit"? The cloning process
> should occur without doing anything at the radio.
>
> The most common problem is using a programming cable with a
> counterfeit Prolific chip with Windows. If the chip is Prolific (check
> Device Manager) and you are using Windows Vista, 7, 8 or 10, you must
> download, install and select an older Prolific v3.2.0.0 device driver
> before you programming cable will work properly.
>
> Check this page for a link to the driver and instructions for
> selecting it after it is installed. Only install this driver if
> Windows recognizes the chip in your cable as a Prolific type chip.
> http://www.miklor.com/COM/UV_Drivers.php
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 23 Oct 2020 23:21:04 +0100
> From: Tony Ling <tonyg7txu at gmail.com>
> Subject: Re: [chirp_users] Error 5
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>         <CAPX1DsZW8=
> 1w3EyOFM_-sw0FZr-a1khqi7MpdjMtbm-ZF-bdkg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Your problem stems from using Windows.
>
> On Fri, 23 Oct 2020 at 23:13, Jim Unroe <rock.unroe at gmail.com> wrote:
>
> > On Fri, Oct 23, 2020 at 4:25 PM Chris Hastie <c.hastiessho at gmail.com>
> > wrote:
> > >
> > > When I went to my device manager it gave me a com3 comport. When I
> click
> > on the read from radio, it gives me the information of comport 3. I then
> > push monitor and push transmit 3 times. after a few seconds I get the
> error
> > 5 notice. I have a Baofeng GT-3TP. What am I doing wrong?
> >
> > Why do you "push monitor" and "push transmit"? The cloning process
> > should occur without doing anything at the radio.
> >
> > The most common problem is using a programming cable with a
> > counterfeit Prolific chip with Windows. If the chip is Prolific (check
> > Device Manager) and you are using Windows Vista, 7, 8 or 10, you must
> > download, install and select an older Prolific v3.2.0.0 device driver
> > before you programming cable will work properly.
> >
> > Check this page for a link to the driver and instructions for
> > selecting it after it is installed. Only install this driver if
> > Windows recognizes the chip in your cable as a Prolific type chip.
> > http://www.miklor.com/COM/UV_Drivers.php
> >
> > Jim KC9HI
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Tony Ling at tonyg7txu at gmail.com
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201023/e0fdfe7e/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 142, Issue 8
> *******************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201025/bdb71689/attachment.html