[chirp_users] Programming Baofeng GT3 - Mk11

[Ken Vernon]

Thanks for that - Silly question... is there any particular setting in the radio menu that needs to be activated?

Sent from my iPhone

> On 21 Nov 2020, at 13:45, straty10 <straty10 at gmail.com> wrote:
> 
> 
> I use it on pc to program icom units no issues unless win 10 has done an update which knocks the driver around
> 
> 
> 
> 
> 
> Sent from my Galaxy
> 
> 
> -------- Original message --------
> From: Ken Vernon <kennethjv at bigpond.com>
> Date: 21/11/20 13:33 (GMT+10:00)
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Subject: Re: [chirp_users] Programming Baofeng GT3 - Mk11
> 
> Have tried wiggling, etc without success .. do you know if this program is better suited to PC or Mac?
> 
> Sent from my iPhone
> 
> > On 21 Nov 2020, at 13:12, Jim Unroe <rock.unroe at gmail.com> wrote:
> > 
> > Ken,
> > 
> >> On Fri, Nov 20, 2020 at 9:02 PM Ken Vernon <kennethjv at bigpond.com> wrote:
> >> 
> >> Hey Jim, would it be a fair assumption that if the cable and chirp program works for my gt3tp and uv5r it should be ok for the GT3 mk11?
> >> 
> > 
> > Yes. Try pressing on the plug a little during the cloning process.
> > 
> > Jim
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Ken at kennethjv at bigpond.com
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Alan at straty10 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com_______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ken at kennethjv at bigpond.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201121/129fa0b1/attachment.html