[chirp_users] Are Baofeng leads TTL?

[Nigel A. Gunn G8IFF/W8IFF]

For an analogue radio the USB end is usually a generic USB/Serial converter chip.
For DMR radios the USB chip is usually inside the radio with no electronics in the cable.



> On 31 May 2020 at 02:31 Phil <phillor9 at gmail.com> wrote:
> 
> 
> I have a project in mind that needs a USB interface lead and since I 
> have several Baofeng programming leads I thought I might cut the radio 
> end off and be left with a TTL compatible lead. Is that the way these 
> leads work or are they specific to the Baofeng radio?
> 
> -- 
> Regards,
> Phil
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions   tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net