[chirp_users] Yaesu

[Jardy]

With the FT-60 Commander software, use the Alternate Write Method. It should work. 

www.kc8unj.com

Jardy Dawson WA7JRD

Message sent by....Oh, who the heck cares, anyway?  Could be my shoelaces, as far as I care!


> On Mar 17, 2020, at 20:42, John Kemker <kemkerj3 at gmail.com> wrote:
> 
> 
> Mark, I can certainly understand why you're sticking with what you have.  Makes lots of sense.  However, your description doesn't sound like your radio was bricked.  That version of CHIRP just didn't want to talk to it.  It may work, now, but there's no reason for you to switch, since you already have working software.  Am I right?
> 
>> On Tue, Mar 17, 2020 at 11:13 PM Mark Lassman via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>> I tried Chirp and some other program I think it was called FT60 Commander? Anyway, could never get it to work, the Chirp software and the radio could not “speak” to each other. I’ve been using the ADMS software for the last ten years with both the FT60 and the FT-7900 with absolutely NO problems. Sure, it’s $50 as opposed to “free” (Chirp), but it works, I’m familiar with it, and it does what I want it to do.
>> 
>>> On Mar 17, 2020, at 7:04 PM, benton at siletzbay.com wrote:
>>> 
>>>> On 2020-03-17 08:52, Dennis Wage wrote:
>>>> 
>>>>  
>>>> Is there any documented cases of Chirp bricking a radio so badly it had to be sent back for a factory restore.
>>>>  
>>>> I see so many Yaesu users bring this up that they're afraid to use Chirp because it will break a radio bad enough to void warranty etc. etc...
>>>>  
>>> I've used Chirp many times with my FT-60 w/o so much as a sneeze.
>>> 
>>> Back in the day, speculation was these stories were circulated by Yaesu due to their partnership with RTS.  I know HRO sold bare 'Kenwood' cables but for my FT-60 I had to buy a cable with the RTS software for $40 - $50.  SW was useless to me, me being a Linux guy (and back then w/o a Win VM.)
>>> 
>>> And at that, I later found the cable wouldn't work with one of the wx-resistant Yaesu models -- the overmolding wouldn't fit down into the programming socket.
>>> 
>>> Benton 17mar2020
>>> --
>>> NX7O
>>> benton at siletzbay.com
>>> 
>>> 
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Mark at kb6kgx at mac.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to W5NNH at kemkerj3 at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> 
> -- 
> --John E Kemker III
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200317/fd6c7f57/attachment.html