[chirp_users] QYT-KT8900D

[Tom Henderson]

It is a problem with the radio itself. Has nothing at all to do with 
Windows, Linux, or Chirp.

Tom Henderson

On 3/7/20 12:53 PM, Amnon Zohar wrote:
> So it is not limited to linux but to windows as well!?
>
> בתאריך שבת, 7 במרץ 2020, 19:22, מאת Terry Hunt 
> ‏<terry at mylakeroyale.com <mailto:terry at mylakeroyale.com>>:
>
>     Thanks Jim, that would make since.  I appreciate the reply and
>     confirmation.
>
>     Terry
>
>     ------------------------------------------------------------------------
>     *From:* chirp_users-bounces at intrepid.danplanet.com
>     <mailto:chirp_users-bounces at intrepid.danplanet.com>
>     <chirp_users-bounces at intrepid.danplanet.com
>     <mailto:chirp_users-bounces at intrepid.danplanet.com>> on behalf of
>     Jim Unroe <rock.unroe at gmail.com <mailto:rock.unroe at gmail.com>>
>     *Sent:* Saturday, March 7, 2020 10:32 AM
>     *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com
>     <mailto:chirp_users at intrepid.danplanet.com>>
>     *Subject:* Re: [chirp_users] QYT-KT8900D
>     On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt <terry at mylakeroyale.com
>     <mailto:terry at mylakeroyale.com>> wrote:
>     >
>     > I have several radios that I program using CHIRP, running Linux
>     the manufacture software isn't usually compatible., so thank you
>     to everyone that works so hard to make CHIRP a success.  I have an
>     8900D that seems to program perfectly with one exception.  This
>     radio has four monitor slots on the front panel.  When
>     programming, the first two work great, number 3 and 4 however do
>     not.  Some settings like choosing the channel or frequency mode do
>     work, but setting a default channel on them do not, they always
>     come up to channel 0 after the restart.  Does anyone else have
>     this issue?
>     >
>     > Thanks,
>     > Terry
>
>     Hi Terry,
>
>     This is a bug in the hardware that has been present since the first
>     units began shipping in 2017.
>
>     Jim KC9HI
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     <mailto:chirp_users at intrepid.danplanet.com>
>     https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&amp;data=02%7C01%7C%7C397a2a549e414369b14308d7c2aced1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637191920273250313&amp;sdata=TRsyr%2F1fJcVsyO0EAYRzlgYsFBblA4%2F8IVv9lb7oV5Q%3D&amp;reserved=0
>     This message was sent to Terry at terry at mylakeroyale.com
>     <mailto:terry at mylakeroyale.com>
>     To unsubscribe, send an email to
>     chirp_users-unsubscribe at intrepid.danplanet.com
>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     <mailto:chirp_users at intrepid.danplanet.com>
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     This message was sent to amnon at amnon.zohar at gmail.com
>     <mailto:amnon.zohar at gmail.com>
>     To unsubscribe, send an email to
>     chirp_users-unsubscribe at intrepid.danplanet.com
>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom KM4UQB at tom at henderson4.us
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200308/89e980ed/attachment.html