[chirp_users] BAOFENG UV-S9T

Bernhard Hailer ae6yn at arrl.net
Thu Jun 18 14:34:15 PDT 2020


Thanks for the feedback, it has been added to the list of supported 
radios :-)

73
Bernhard AE6YN

On 16-Jun-20 18:32, Chris Luppens wrote:
> Not sure I am responding properly but found cross reference and yes UV-5RX3 worked!!  My first time at this so am learning "tricks" as I go,,,
> Thanks much!
>
> Chris KG5BBF
>
> --Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Jim Unroe
> Sent: Tuesday, June 16, 2020 7:07 PM
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Subject: Re: [chirp_users] BAOFENG UV-S9T
>
> On Tue, Jun 16, 2020 at 7:24 PM Chris Luppens <jcluppens at ussailing.net> wrote:
>> Have new radio and this specific model does not appear on the list
>> when setting up to clone the radio. I have tried every model on the
>> list and I get same result “Radio did not respond.  I  can see the USB
>> Serial Port (Com3) installed and the USB Serial Converter pops up when
>> the connector cable is installed . (I did install largest drivers.)
>>
>>
>>
>> So as the “newer” radio not listed am I just out of luck or what? I bought cable from BTECH and downloaded CHIRP from WWW.Baofengtech.com/download as instructed.
>>
>>
>>
>> Chris Luppens
> The selection you should use is most likely Vendor: Radioddity and
> Model: UV-5RX3. If you try this and it fails, attach a debug.log file.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John Luppens at jcluppens at ussailing.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Bernhard Hailer at ae6yn at arrl.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200618/e5a6800a/attachment-0002.html 


More information about the chirp_users mailing list