[chirp_users] Error-radio did not respond

John Dodd jump12k at gmail.com
Sat Feb 1 12:14:51 PST 2020


Yeah, had the same issue... try all com ports until one works. Make sure
you push the plug into your HT real hard... it sometimes takes some force.

On Sat, Feb 1, 2020 at 3:02 PM John La <JohnLa at usa.net> wrote:

> Here is a list of error messages and solutions that may assist.
>
> www.Miklor.com/COM/UV_ErrorMess.php
>
> John  K3NXU
>
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:
> chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Mark Ross
> Sent: Saturday, February 1, 2020 11:02 AM
> To: chirp_users at intrepid.danplanet.com
> Subject: [chirp_users] Error-radio did not respond
>
> I am a first time user. UV 5r. Can’t upload from radio. Error message
> comes up radio did not respond. I put in Com3 as it shows, model is correct
> as well as vendor. Any ideas are appreciated
>
> Thank you so much!
>
> Mark Ross
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John LaMartina at johnla at usa.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to JOHN at jump12k at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com

-- 
John Dodd
Chesapeake Bay
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200201/b8a56e8d/attachment-0002.html 


More information about the chirp_users mailing list