[chirp_users] Having troubles

holmziep at netscape.net
Wed Feb 26 14:01:06 PST 2020


OK, Im logged in the terminal as superuser.  What is the syntax for the command to add holmzie to the dialout?
 
 
 
-----Original Message-----
From: K 0 L N Y Glenn <glennervin at cableone.net>
To: holmziep <holmziep at netscape.net>; Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Wed, Feb 26, 2020 3:48 pm
Subject: Re: [chirp_users] Having troubles

I would try sudo -s or sudo su  in the terminal first, enter your username, and then do the dial out part, and log out and back in, and it should work.HTH.Glenn
 ----- Original Message -----  From: holmzieN2EXG via chirp_users  To: chirp_users at intrepid.danplanet.com  Sent: Wednesday, February 26, 2020 2:19 PM Subject: [chirp_users] Having troubles 
  Have the Yaesu 857 w/ oem serial cable, then a good FTDI Serial/usb adapter.  Running Linux Mint 19.3.  
 
 Got the dreaded error [Errno 13] could not open port /dev/ttyS0: [Errno 13] Permission denied: '/dev/ttyS0'
 
 Searched long and hard, Done everything, Dan and others say to do,  carefully, no luck.  Here's some commands and results:
 
 Pete, N2EXG
 
 
 sudo gpasswd --add $holmzie dialout gives me      gpasswd: user 'dialout' does not exist 
 Groups holmzie adm cdrom sudo dip plugdev lpadmin sambashare 
 sudo addgroup $holmzie dialout
 addgroup: The group `dialout' already exists.
 
 usb-devices T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=6001 Rev=04.00
S:  Manufacturer=FTDI
S:  Product=USB HS SERIAL CONVERTER
S:  SerialNumber=FTDYUTIA
C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=44mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
 
 lsusb -v 
 Bus 003 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0403 Future Technology Devices International, Ltd
  idProduct          0x6001 FT232 USB-Serial (UART) IC
  bcdDevice            4.00
  iManufacturer           1 FTDI
  iProduct                2 USB HS SERIAL CONVERTER
  iSerial                 3 FTDYUTIA
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               44mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 USB HS SERIAL CONVERTER
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered) 
 
 holmzie at holmzie-All-Series ~ $ cat /etc/group
root:x:0:
daemon:x:1:
bin:x:2:
sys:x:3:
adm:x:4:syslog,holmzie
tty:x:5:
disk:x:6:
lp:x:7:
mail:x:8:
news:x:9:
uucp:x:10:
man:x:12:
proxy:x:13:
kmem:x:15:
dialout:x:20:
fax:x:21:
voice:x:22:
cdrom:x:24:holmzie
floppy:x:25:
tape:x:26:
sudo:x:27:holmzie
audio:x:29:pulse
dip:x:30:holmzie
www-data:x:33:
backup:x:34:
operator:x:37:
list:x:38:
irc:x:39:
src:x:40:
gnats:x:41:
shadow:x:42:
utmp:x:43:
video:x:44:
sasl:x:45:
plugdev:x:46:holmzie
staff:x:50:
games:x:60:
users:x:100:
nogroup:x:65534:
systemd-journal:x:101:
systemd-network:x:102:
systemd-resolve:x:103:
input:x:104:
crontab:x:105:
syslog:x:106:
messagebus:x:107:
netdev:x:108:
mlocate:x:109:
ssl-cert:x:110:
uuidd:x:111:
avahi-autoipd:x:112:
ssh:x:113:
bluetooth:x:114:
lpadmin:x:115:holmzie
ntp:x:116:
lightdm:x:117:
nopasswdlogin:x:118:
rtkit:x:119:
scanner:x:120:saned
saned:x:121:
nm-openvpn:x:122:
avahi:x:123:
colord:x:124:
pulse:x:125:
pulse-access:x:126:
geoclue:x:127:
holmzie:x:1000:
sambashare:x:128:holmzie
mysql:x:129:

 
   _______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200226/e32dc10c/attachment.html 


More information about the chirp_users mailing list