[chirp_users] Error-radio did not respond

Nigel A. Gunn G8IFF/W8IFF
Sat Feb 1 08:09:20 PST 2020

You upload TO radio, DOWNLOAD from radio.
It's probably not com3. Mine is /dev/ttyUSB0
You probably have the wrong device driver loaded for the cable which probably isn't plugged in far enough.
Think we need more details.

> On 01 February 2020 at 11:01 Mark Ross <marksross77 at gmail.com> wrote:
> I am a first time user. UV 5r. Can’t upload from radio. Error message comes up radio did not respond. I put in Com3 as it shows, model is correct as well as vendor. Any ideas are appreciated   
> Thank you so much!
> Mark Ross
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions   tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net

More information about the chirp_users mailing list