[chirp_users] BTech 5X3

John subs at qcontinuum.plus.com
Thu Dec 31 11:02:40 PST 2020


 > I loaded all of the NOAA weather channels, but do not seem to get any 
reception on any of them, although I know they broadcast non-stop. Is 
there something else I need to do in the setup? Problem exists whether I 
scan (and do not skip channel) or input the frequency directly.

You still haven't mentioned which country you are in. Although the 
satellites transmit most of the time, they are not geostationary so do 
not appear over your position all the time. You need to which satellites 
pass over your position and when they are due to pass over. You will 
only hear a signal during a pass. There are prediction programs you can 
download such as Gpredict and Orbitron to help you determine that.

 > Is there a way to jump directly to a specific channel in memory, 
instead of having to step through one at a time using the arrow keys?

https://forums.qrz.com/index.php?threads/baofeng-uv-5r-how-to-directly-change-channels.687660/

 > Is there a way to link the frequency AND the corresponding channel 
name in the display, either on the A/B display lines (frequency on one 
and name on the other) or by toggling between frequency and channel mode 
to see both pieces of data on the same line (A or B)?

In short, no. You can't display data for VFO A on the VFO B line or vice 
versa and you can't display frequency and channel name at the same time. 
There is, however, a workaround described here that may or may not be 
helpful:

https://ham.stackexchange.com/questions/7501/can-a-baofeng-uv-5r-display-both-name-and-frequency-simultaneously

Regards.


Kramarik at Earthlink.net wrote on 31/12/2020 17:28:
>
> I have loaded many frequencies from the Chirp stock configuration 
> list, which was actually pretty easy, once you understand the steps. 
> However, this has now led to a few new questions:
>
>  1. In the FRS/GMRS category, it loaded what appears to be identical
>     frequencies for 20 channels in each of these groups (Channel 1-20
>     for each group is the same). Is there a reason for this redundancy
>     or can I delete one range?
>  2. I loaded all of the NOAA weather channels, but do not seem to get
>     any reception on any of them, although I know they broadcast
>     non-stop. Is there something else I need to do in the setup?
>     Problem exists whether I scan (and do not skip channel) or input
>     the frequency directly.
>  3. Is there a way to jump directly to a specific channel in memory,
>     instead of having to step through one at a time using the arrow keys?
>  4. Is there a way to link the frequency AND the corresponding channel
>     name in the display, either on the A/B display lines (frequency on
>     one and name on the other) or by toggling between frequency and
>     channel mode to see both pieces of data on the same line (A or B)?
>  5. Once I load all the desired frequencies from the Chirp stock
>     configuration lists into memory, do I need to modify any of the
>     individual column settings that were loaded into each frequency line?
>
> Thanks,
>
> Rich
>
>

-- 
John.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201231/ecace3ba/attachment-0002.html 


More information about the chirp_users mailing list