[chirp_users] Chirp and BaoFeng UV 5R not communicating

Jardy jardy72 at yahoo.com
Sun Aug 23 08:34:07 PDT 2020


Did you check Windows Device Manager to see if your cable shows to be a Prolific cable?  If it is, try rolling your driver back to 3.2.0.0. Check www.miklor.com for info. Check under Drivers. 

Jardy Dawson WA7JRD

Message sent by....Oh look!! Pretty lights!!


> On Aug 23, 2020, at 08:24, Gary A. Cox <garyacox at sbcglobal.net> wrote:
> 
> Charles,
> I have never gotten my radios to sync either and Finely  gave up.
> I even bought 2 cables thinking it was a cable I followed all the instructions just like you.
> If you succeed, please email me back 
> 
> Gary A Cox
> Sent from my iPhone
> 
>>> On Aug 22, 2020, at 4:12 PM, Alan Hill <alan.r.hill at gmail.com> wrote:
>>> 
>> 
>> Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp.  Also turn the volume up from minimum.   Last resort run chirp as adminstrator.
>> 
>> 
>>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke <cgierke at cox.net> wrote:
>>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. 
>>> 
>>> On Friday all I got was the following message:  Radio Did Not Respond.
>>> 
>>> I tried reloading the latest version of CHIRP, no change.  I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change.  Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>> 
>>> 
>>> 
>>> Any suggestions?
>>> 
>>> Thanks Chuck KJ7INT
>>> 
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Silver Fox at alan.r.hill at gmail.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Gary at garyacox at sbcglobal.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/d7eb06ef/attachment-0002.html 


More information about the chirp_users mailing list