[chirp_users] Chirp and BaoFeng UV 5R not communicating
cgierke at cox.net
Sat Aug 22 21:19:52 PDT 2020
Thanks for the suggestions, I will apply constant pressure.
I never tried starting a program as administrator, it is worth a try.
> On August 22, 2020 at 4:11 PM Alan Hill <alan.r.hill at gmail.com> wrote:
> Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp. Also turn the volume up from minimum. Last resort run chirp as adminstrator.
> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke at cox.net mailto:cgierke at cox.net > wrote:
> > >
> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
> > On Friday all I got was the following message: Radio Did Not Respond.
> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
> > Any suggestions?
> > Thanks Chuck KJ7INT
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Silver Fox at alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > > _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> This message was sent to Chuck at cgierke at cox.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users