[chirp_users] chirp_users Digest, Vol 140, Issue 11
Tommy Long
Tue Aug 25 12:34:14 PDT 2020
do you have a answer for me on message for number 3
------ Original Message ------
From: chirp_users-request at intrepid.danplanet.com
To: chirp_users at intrepid.danplanet.com
Sent: 8/25/2020 2:00:02 PM
Subject: chirp_users Digest, Vol 140, Issue 11
>Send chirp_users mailing list submissions to
>chirp_users at intrepid.danplanet.com
>
>To subscribe or unsubscribe via the World Wide Web, visit
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>or, via email, send a message with subject or body 'help' to
>chirp_users-request at intrepid.danplanet.com
>
>You can reach the person managing the list at
>chirp_users-owner at intrepid.danplanet.com
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of chirp_users digest..."
>
>
>Today's Topics:
>
> 1. Re: Zastone ZT-X6 : Chirp "Radio Identification Failed"
> (Victor Lim)
> 2. Re: chirp_users Digest, Vol 140, Issue 10 (Tommy Long)
> 3. Re: chirp_users Digest, Vol 140, Issue 10
> (Nigel A. Gunn G8IFF/W8IFF)
> 4. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 5. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 6. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 7. Re: Chirp and BaoFeng UV 5R not communicating (Glenn K0LNY)
> 8. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 9. Re: Chirp and BaoFeng UV 5R not communicating (Peter J. McClosky)
> 10. Re: Chirp and BaoFeng UV 5R not communicating
> (Nigel A. Gunn G8IFF/W8IFF)
> 11. Re: chirp_users Digest, Vol 140, Issue 10 (Chuck Hast)
> 12. oddities (failures) finding/installing on Ubuntu 20.04
> (Ted Timmons)
> 13. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Allen Roark)
> 14. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (wa0sbu at kslimmer.com)
> 15. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Glenn K0LNY)
> 16. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Nigel A. Gunn G8IFF/W8IFF)
> 17. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Tony Fuller)
> 18. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Nigel A. Gunn G8IFF/W8IFF)
> 19. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Ted Timmons)
> 20. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Nigel A. Gunn G8IFF/W8IFF)
> 21. Re: oddities (failures) finding/installing on Ubuntu 20.04
> (Ted Timmons)
> 22. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 23. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 24. Re: Chirp and BaoFeng UV 5R not communicating (Glenn K0LNY)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Mon, 24 Aug 2020 13:00:57 -0700
>From: Victor Lim <victorlimskv at gmail.com>
>Subject: Re: [chirp_users] Zastone ZT-X6 : Chirp "Radio Identification
> Failed"
>To: chirp_users at intrepid.danplanet.com
>Message-ID:
> <CAAy16c22U3RihB_d8hoPArj-Ah49oKheEMiPJEh+K9sUhScF8g at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>Hi - anybody can help with my Zastone X6 "Radio Identification Failed"
>error?
>
>i confirm my laptop is running window 10 and COM4 is working for me.
>
>Best Regards,
>Victor Seng-Keong Lim
>
>
>On Fri, Aug 21, 2020 at 8:53 PM Victor Lim <victorlimskv at gmail.com> wrote:
>
>> Subject: Zastone ZT-X6 : Chirp "Radio Identification Failed"
>> Hi Sir/ Mdm,
>> i have a new Zastone ZT-X6 and was experiencing "Radio identification
>> failed" message when i tried to read the unit using it programming cable.
>> I installed the latest Chirp SW for Windows .
>> I'm first timer on Chirp. Pls advise how can i fixed this issue to have
>> my ZT-X6 programmed. Thank you very much.
>>
>> Best Regards,
>> Victor
>>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/e20e635b/attachment-0001.html
>
>------------------------------
>
>Message: 2
>Date: Mon, 24 Aug 2020 20:02:06 +0000
>From: "Tommy Long" <tjl1960 at gmail.com>
>Subject: Re: [chirp_users] chirp_users Digest, Vol 140, Issue 10
>To: chirp_users at intrepid.danplanet.com
>Message-ID: <em0e8c541d-d8f7-4cba-a438-045d096051da at desktop-dcjtf13>
>Content-Type: text/plain; charset=utf-8; format=flowed
>
>Do you ever think they will fix them to download radio reference ?
>
>------ Original Message ------
>From: chirp_users-request at intrepid.danplanet.com
>To: chirp_users at intrepid.danplanet.com
>Sent: 8/24/2020 2:00:02 PM
>Subject: chirp_users Digest, Vol 140, Issue 10
>
>>Send chirp_users mailing list submissions to
>>chirp_users at intrepid.danplanet.com
>>
>>To subscribe or unsubscribe via the World Wide Web, visit
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>or, via email, send a message with subject or body 'help' to
>>chirp_users-request at intrepid.danplanet.com
>>
>>You can reach the person managing the list at
>>chirp_users-owner at intrepid.danplanet.com
>>
>>When replying, please edit your Subject line so it is more specific
>>than "Re: Contents of chirp_users digest..."
>>
>>
>>Today's Topics:
>>
>> 1. Re: transferring channels from one radio manuf.to another
>> (Michael Rathbun)
>> 2. Re: transferring channels from one radio manuf.to another
>> (kn1ndn at gmail.com)
>> 3. ICOM 5100 (Tim Fitch)
>> 4. Re: Chirp and BaoFeng UV 5R not communicating (Brian Erickson)
>> 5. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
>> 6. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
>> 7. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
>> 8. Re: Chirp and BaoFeng UV 5R not communicating (Don Goodrich)
>> 9. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
>> 10. Re: Chirp and BaoFeng UV 5R not communicating
>> (Nigel A. Gunn G8IFF/W8IFF)
>> 11. Re: Chirp and BaoFeng UV 5R not communicating (Silverfox)
>> 12. Re: ICOM 5100 (Chuck Hast)
>> 13. Re: ICOM 5100 (Jean C. Velez)
>> 14. Re: ICOM 5100 (Chuck Hast)
>> 15. Baofeng UV-9r plus cable issues (Jeremiah Williams)
>> 16. Re: Baofeng UV-9r plus cable issues (Jardy)
>> 17. Re: Baofeng UV-9r plus cable issues (W Paul Mills)
>> 18. Re: Baofeng UV-9r plus cable issues (Jim Unroe)
>> 19. Re: transferring channels from one radio manuf.to another
>> (Jim Unroe)
>> 20. Re: Baofeng UV-9r plus cable issues (richard ward)
>> 21. Re: Baofeng UV-9r plus cable issues (Jeremiah Williams)
>> 22. Re: Baofeng UV-9r plus cable issues (John La)
>>
>>
>>----------------------------------------------------------------------
>>
>>Message: 1
>>Date: Sun, 23 Aug 2020 14:23:52 -0500
>>From: Michael Rathbun <KL7F at kl7f.us>
>>Subject: Re: [chirp_users] transferring channels from one radio
>> manuf.to another
>>To: "chirp_users at intrepid.danplanet.com"
>> <chirp_users at intrepid.danplanet.com>
>>Message-ID: <feg5kfda5kvbvuc859ts9dm53gqqof9chb at tesp.com>
>>Content-Type: text/plain; charset=us-ascii
>>
>>On Sun, 23 Aug 2020 18:54:59 +0000 (UTC), robert moore via chirp_users
>><chirp_users at intrepid.danplanet.com> wrote:
>>
>>>Hello all,I have been using chirp for a few years now to program my baofeng UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the channels and settings on my Baofeng are the exact same ones that i want to program in to my new Leixen. Is there a way to transfer the information from the Baofeng to the Leixen using chirp? thanks
>>>Robert/ KM4ORN
>>
>>Conveying Baofeng UV-5 to an Icom IC-T7H was a matter of copy/paste, with
>>the occasional conflict to be resolved because of different channel usages.
>>
>>mdr
>>
>>
>>
>>------------------------------
>>
>>Message: 2
>>Date: Sun, 23 Aug 2020 12:25:45 -0700
>>From: <kn1ndn at gmail.com>
>>Subject: Re: [chirp_users] transferring channels from one radio
>> manuf.to another
>>To: "'robert moore'" <rm31859 at yahoo.com>, "'Discussion of CHIRP'"
>> <chirp_users at intrepid.danplanet.com>
>>Message-ID: <008a01d67983$339137c0$9ab3a740$@gmail.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>>Are you the same Robert Moore from ACFP?
>>
>>
>>
>>
>>
>>From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> On Behalf Of robert moore via chirp_users
>>Sent: Sunday, August 23, 2020 11:55 AM
>>To: chirp_users at intrepid.danplanet.com
>>Subject: [chirp_users] transferring channels from one radio manuf.to another
>>
>>
>>
>>Hello all,
>>
>>I have been using chirp for a few years now to program my baofeng UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the channels and settings on my Baofeng are the exact same ones that i want to program in to my new Leixen. Is there a way to transfer the information from the Baofeng to the Leixen using chirp? thanks
>>
>>
>>
>>Robert/ KM4ORN
>>
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/09033256/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 3
>>Date: Sun, 23 Aug 2020 19:32:34 +0000
>>From: Tim Fitch <fivesam20 at msn.com>
>>Subject: [chirp_users] ICOM 5100
>>To: "chirp_users at intrepid.danplanet.com"
>> <chirp_users at intrepid.danplanet.com>
>>Message-ID:
>> <BY5PR17MB35055B7EC6C9A239B66083F2A4590 at BY5PR17MB3505.namprd17.prod.outlook.com>
>>Content-Type: text/plain; charset="us-ascii"
>>
>>
>>Will Icom 5100A ever be added to the list of supported radios to be programmed by CHIRP? Or is there a work around so that you can program it?
>>
>>Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>>
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1b830214/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 4
>>Date: Sun, 23 Aug 2020 14:58:03 -0600
>>From: Brian Erickson <brian at dashley.net>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>Message-ID: <6A7E1642-8534-4E85-B9BE-9E28386EEC77 at dashley.net>
>>Content-Type: text/plain; charset="utf-8"
>>
>>I have the cable needed to be held into the radio really hard for it to work.
>>
>>Sent from my iPad
>>
>>> On Aug 23, 2020, at 12:32 PM, Charles Gierke <cgierke at cox.net> wrote:
>>>
>>> ? The cable has been working since August 2019. for over a year no problems. perhaps the warranty is up lol
>>>
>>>>>> On August 23, 2020 at 8:34 AM Jardy via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>>>>>>
>>>>>> Did you check Windows Device Manager to see if your cable shows to be a Prolific cable? If it is, try rolling your driver back to 3.2.0.0. Check www.miklor.com for info. Check under Drivers.
>>>>>>
>>>>>> Jardy Dawson WA7JRD
>>>>>>
>>>>>> Message sent by....Oh look!! Pretty lights!!
>>>>>>
>>>>>>
>>>>>> On Aug 23, 2020, at 08:24, Gary A. Cox <garyacox at sbcglobal.net> wrote:
>>>>>>
>>>>>> ?Charles,
>>>>>> I have never gotten my radios to sync either and Finely gave up.
>>>>>> I even bought 2 cables thinking it was a cable I followed all the instructions just like you.
>>>>>> If you succeed, please email me back
>>>>>>
>>>>>> Gary A Cox
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Aug 22, 2020, at 4:12 PM, Alan Hill <alan.r.hill at gmail.com> wrote:
>>>>>>>
>>>>>>> ?
>>>>>>> Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp. Also turn the volume up from minimum. Last resort run chirp as adminstrator.
>>>>>>>
>>>>>>>
>>>>>>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke at cox.net> wrote:
>>>>>>>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>>>>>>>
>>>>>>>> On Friday all I got was the following message: Radio Did Not Respond.
>>>>>>>>
>>>>>>>> I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Any suggestions?
>>>>>>>>
>>>>>>>> Thanks Chuck KJ7INT
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> chirp_users mailing list
>>>>>>>>chirp_users at intrepid.danplanet.com
>>>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>>>> This message was sent to Silver Fox at alan.r.hill at gmail.com
>>>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>>> _______________________________________________
>>>>>>> chirp_users mailing list
>>>>>>>chirp_users at intrepid.danplanet.com
>>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>>> This message was sent to Gary at garyacox at sbcglobal.net
>>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>>chirp_users at intrepid.danplanet.com
>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> This message was sent to Jardy at jardy72 at yahoo.com
>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>>chirp_users at intrepid.danplanet.com
>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Chuck at cgierke at cox.net
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Brian at brian at dashley.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/a3522361/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 5
>>Date: Sun, 23 Aug 2020 14:47:57 -0700 (MST)
>>From: Charles Gierke <cgierke at cox.net>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Jim
>> Unroe <rock.unroe at gmail.com>
>>Message-ID: <1998916226.214486.1598219277396 at myemail.cox.net>
>>Content-Type: text/plain; charset="utf-8"
>>
>>no luck yet.
>>I tried pressure straight into the radio, to the back side of the radio, to the front side of the radio, to the top of the radio and to the bottom of the radio.
>>similar results, the LCD screen blinks and goes back to the beginning screen.
>>
>>thanks again for the suggestion
>>
>>> On August 22, 2020 at 3:50 PM Jim Unroe < rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>>
>>>
>>> On Sat, Aug 22, 2020 at 6:46 PM Charles Gierke < cgierke at cox.net mailto:cgierke at cox.net > wrote:
>>> >
>>>
>>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>> >
>>> > >
>>> > > On Friday all I got was the following message: Radio Did Not Respond.
>>> >
>>> > >
>>> > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>> >
>>> > > >
>>>
>>> > > Any suggestions?
>>> >
>>> > >
>>> > > Thanks Chuck KJ7INT
>>> >
>>> > > Hi Chuck,
>>>
>>> You will get the exact same error message if you don't plug the 2-pin
>>> plug into the radio. So make sure that the 2-pin plug is fully
>>> inserted into the socket of the radio. Some have had to put a little
>>> pressure on the plug during the cloning process.
>>>
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck at cgierke at cox.net mailto:cgierke at cox.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f8e9fc25/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 6
>>Date: Sun, 23 Aug 2020 14:55:01 -0700 (MST)
>>From: Charles Gierke <cgierke at cox.net>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Alan
>> Hill <alan.r.hill at gmail.com>
>>Message-ID: <1955657603.214592.1598219701014 at myemail.cox.net>
>>Content-Type: text/plain; charset="utf-8"
>>
>>NO luck yet. I held the plug in as far as it would go, no change. I turned the volume up all the way, no luck. I closed CHIRP and re-opened as Administrator,still no luck up or downloading.
>>
>>thanks for your assistance
>>
>>
>>> On August 22, 2020 at 4:11 PM Alan Hill <alan.r.hill at gmail.com> wrote:
>>>
>>> Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp. Also turn the volume up from minimum. Last resort run chirp as adminstrator.
>>>
>>>
>>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke at cox.net mailto:cgierke at cox.net > wrote:
>>>
>>> > >
>>> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>> >
>>> > On Friday all I got was the following message: Radio Did Not Respond.
>>> >
>>> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>> >
>>> >
>>> > Any suggestions?
>>> >
>>> > Thanks Chuck KJ7INT
>>> >
>>> > _______________________________________________
>>> > chirp_users mailing list
>>> > chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> > This message was sent to Silver Fox at alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com
>>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>> >
>>> > > _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck at cgierke at cox.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/65594809/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 7
>>Date: Sun, 23 Aug 2020 15:04:59 -0700 (MST)
>>From: Charles Gierke <cgierke at cox.net>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, John
>> LaMartina <JohnLa at usa.net>
>>Message-ID: <418604032.214670.1598220299987 at myemail.cox.net>
>>Content-Type: text/plain; charset="utf-8"
>>
>>hi, still no luck.
>>I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>>
>>thanks for the suggestions
>>
>>
>>> On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>>>
>>> This may assist.
>>>Www.Miklor.com/COM/UV_ErrorMess.php
>>>
>>> John
>>>Www.Miklor.com/UV5R
>>>
>>>
>>>
>>> > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>>> >
>>> >
>>> > >
>>> > > ?
>>> >
>>> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>> >
>>> > On Friday all I got was the following message: Radio Did Not Respond.
>>> >
>>> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>> >
>>> >
>>> > Any suggestions?
>>> >
>>> > Thanks Chuck KJ7INT
>>> >
>>> > _______________________________________________
>>> > chirp_users mailing list
>>> > chirp_users at intrepid.danplanet.com
>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> > This message was sent to John LaMartina at johnla at usa.net
>>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> >
>>> > >
>>
>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck at cgierke at cox.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1822ebfe/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 8
>>Date: Mon, 24 Aug 2020 00:08:56 +0200
>>From: Don Goodrich <don.goodrich at cheerful.com>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: chirp_users at intrepid.danplanet.com
>>Message-ID:
>> <trinity-c73ec6b2-1e51-44c1-b303-6c1692159291-1598220536913 at 3c-app-mailcom-lxa13>
>>Content-Type: text/plain; charset="us-ascii"
>>
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/d79dd822/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 9
>>Date: Sun, 23 Aug 2020 15:13:49 -0700 (MST)
>>From: Charles Gierke <cgierke at cox.net>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, R G
>> <mettle777 at outlook.com>
>>Message-ID: <734118452.214824.1598220829099 at myemail.cox.net>
>>Content-Type: text/plain; charset="utf-8"
>>
>>hi, no luck. I tried disconnecting the cable and re-inserting the cable. no luck, the problem is occurring between 3 and 4 seconds into the program.
>>
>>thanks for the suggestion
>>
>>
>>> On August 22, 2020 at 7:10 PM R G <mettle777 at outlook.com> wrote:
>>>
>>>
>>> Hi;
>>>
>>> I?m new, however this happened to me several times. I found that if I disconnected the cable and started everything from START, it solved my problem every time...Hope this helps...Like I said I am NEW to this. ;}
>>>
>>> Regards
>>>
>>> Ron
>>>
>>>
>>>
>>> Sent from Mail https://go.microsoft.com/fwlink/?LinkId=550986 for Windows 10
>>>
>>>
>>>
>>> From: John LaMartina mailto:JohnLa at usa.net
>>> Sent: August 22, 2020 8:56 PM
>>> To: Discussion of CHIRP mailto:chirp_users at intrepid.danplanet.com
>>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>>
>>>
>>>
>>> This may assist.
>>>
>>>Www.Miklor.com/COM/UV_ErrorMess.php
>>>
>>>
>>>
>>> John
>>>
>>>Www.Miklor.com/UV5R
>>>
>>>
>>>
>>>
>>>
>>> > >
>>> > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>>> >
>>> > >
>>> > >
>>> > ?
>>> >
>>> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>> >
>>> > On Friday all I got was the following message: Radio Did Not Respond.
>>> >
>>> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>> >
>>> >
>>> >
>>> > Any suggestions?
>>> >
>>> > Thanks Chuck KJ7INT
>>> >
>>> > >
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to John LaMartina at johnla at usa.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>>
>>>
>>
>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck at cgierke at cox.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f219174f/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 10
>>Date: Sun, 23 Aug 2020 18:29:37 -0400 (EDT)
>>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>Message-ID: <536516552.1973718.1598221777528 at email.ionos.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>>Might help if we knew where you were located.
>>
>>
>>> On 23 August 2020 at 18:04 Charles Gierke <cgierke at cox.net> wrote:
>>>
>>> hi, still no luck.
>>> I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>>>
>>> thanks for the suggestions
>>>
>>>
>>> > > On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>>> >
>>> > This may assist.
>>> > Www.Miklor.com/COM/UV_ErrorMess.php
>>> >
>>> > John
>>> > Www.Miklor.com/UV5R
>>> >
>>> >
>>> >
>>> > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>>> > >
>>> > >
>>> > > > >
>>> > > > >
>>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>> > >
>>> > > On Friday all I got was the following message: Radio Did Not Respond.
>>> > >
>>> > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>> > >
>>> > >
>>> > > Any suggestions?
>>> > >
>>> > > Thanks Chuck KJ7INT
>>> > >
>>> > > _______________________________________________
>>> > > chirp_users mailing list
>>> > > chirp_users at intrepid.danplanet.com
>>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> > > This message was sent to John LaMartina at johnla at usa.net
>>> > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> > >
>>> > > > >
>>> > >
>>>
>>> > > _______________________________________________
>>> > chirp_users mailing list
>>> > chirp_users at intrepid.danplanet.com
>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> > This message was sent to Chuck at cgierke at cox.net
>>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> >
>>> > > _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>>
>>
>>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/74fe899a/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 11
>>Date: Sun, 23 Aug 2020 16:26:04 -0700
>>From: "Silverfox" <alan.r.hill at gmail.com>
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>,
>> "'John LaMartina'" <JohnLa at usa.net>
>>Message-ID: <5f42fb0c.1c69fb81.df118.0278 at mx.google.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>>I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
>>Good luck.
>>Alan
>>
>>From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Charles Gierke
>>Sent: Sunday, August 23, 2020 3:05 PM
>>To: Discussion of CHIRP; John LaMartina
>>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>
>>hi, still no luck.
>>I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>>
>>thanks for the suggestions
>>
>>
>>
>>On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>>This may assist.
>>Www.Miklor.com/COM/UV_ErrorMess.php
>>
>>John
>>Www.Miklor.com/UV5R
>>
>>
>>
>>
>>On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>>?
>>On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>On Friday all I got was the following message: Radio Did Not Respond.
>>I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>
>>Any suggestions?
>>Thanks Chuck KJ7INT
>>_______________________________________________
>>chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>This message was sent to John LaMartina at johnla at usa.net
>>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>_______________________________________________
>>chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>This message was sent to Chuck at cgierke at cox.net
>>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5c54a1a5/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 12
>>Date: Sun, 23 Aug 2020 19:03:11 -0500
>>From: Chuck Hast <kp4djt at gmail.com>
>>Subject: Re: [chirp_users] ICOM 5100
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>Message-ID:
>> <CAN9xdP_vnndYFcyCzW-bGb=PS1JHdAwn8JQ5x0WyJ=O1=6J=DA at mail.gmail.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>>I have asked the same question, I have even offered the use of my radio to
>>test it, sure
>>would be nice to get the 5100A in under Chirp.
>>
>>
>>On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <fivesam20 at msn.com> wrote:
>>
>>>
>>>
>>> Will Icom 5100A ever be added to the list of supported radios to be
>>> programmed by CHIRP? Or is there a work around so that you can program it?
>>>
>>>
>>>
>>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
>>> Windows 10
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>> To unsubscribe, send an email to
>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>>--
>>Chirp + Editcp + MD380Tools on Linux
>>Celestial!!!
>>Chuck -- KP4DJT
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/c0ebb95b/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 13
>>Date: Sun, 23 Aug 2020 21:01:57 -0400
>>From: "Jean C. Velez" <jeanvelez69 at gmail.com>
>>Subject: Re: [chirp_users] ICOM 5100
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>Message-ID:
>> <CAB__4Zv=m8o7e=3GL7XekqsrdjejHkU3pRuNwnveLYA30mdgSA at mail.gmail.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>>What about for ID4100a?
>>
>>On Sun, Aug 23, 2020 at 20:03 Chuck Hast <kp4djt at gmail.com> wrote:
>>
>>> I have asked the same question, I have even offered the use of my radio to
>>> test it, sure
>>> would be nice to get the 5100A in under Chirp.
>>>
>>>
>>> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <fivesam20 at msn.com> wrote:
>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Will Icom 5100A ever be added to the list of supported radios to be
>>>> programmed by CHIRP? Or is there a work around so that you can program it?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sent from
>>>>
>>>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>>
>>>> chirp_users mailing list
>>>>
>>>>
>>>>chirp_users at intrepid.danplanet.com
>>>>
>>>>
>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>
>>>>
>>>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>>>
>>>>
>>>> To unsubscribe, send an email to
>>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>>
>>>
>>> --
>>> Chirp + Editcp + MD380Tools on Linux
>>> Celestial!!!
>>> Chuck -- KP4DJT
>>>
>>>
>>> _______________________________________________
>>>
>>> chirp_users mailing list
>>>
>>>chirp_users at intrepid.danplanet.com
>>>
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>> This message was sent to JEAN VELEZ at jeanvelez69 at gmail.com
>>>
>>> To unsubscribe, send an email to
>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>--
>>null
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5db1d60c/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 14
>>Date: Sun, 23 Aug 2020 20:48:29 -0500
>>From: Chuck Hast <kp4djt at gmail.com>
>>Subject: Re: [chirp_users] ICOM 5100
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>Message-ID:
>> <CAN9xdP96P7tCSfEzA3QubSxKUmn8HMGHuNZ2Kr4U+xRGjLn23A at mail.gmail.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>>I would almost bet that we get the 5100a running the 4100a might
>>come in on the same ticket, radio appears to be a subset of the
>>5100a.
>>
>>On Sun, Aug 23, 2020 at 8:03 PM Jean C. Velez <jeanvelez69 at gmail.com> wrote:
>>
>>> What about for ID4100a?
>>>
>>> On Sun, Aug 23, 2020 at 20:03 Chuck Hast <kp4djt at gmail.com> wrote:
>>>
>>>> I have asked the same question, I have even offered the use of my radio
>>>> to test it, sure
>>>> would be nice to get the 5100A in under Chirp.
>>>>
>>>>
>>>> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <fivesam20 at msn.com> wrote:
>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Will Icom 5100A ever be added to the list of supported radios to be
>>>>> programmed by CHIRP? Or is there a work around so that you can program it?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Sent from
>>>>>
>>>>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>>
>>>>> chirp_users mailing list
>>>>>
>>>>>
>>>>>chirp_users at intrepid.danplanet.com
>>>>>
>>>>>
>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>
>>>>>
>>>>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>>>>
>>>>>
>>>>> To unsubscribe, send an email to
>>>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>>
>>>>
>>>> --
>>>> Chirp + Editcp + MD380Tools on Linux
>>>> Celestial!!!
>>>> Chuck -- KP4DJT
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>> chirp_users mailing list
>>>>
>>>>chirp_users at intrepid.danplanet.com
>>>>
>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>
>>>> This message was sent to JEAN VELEZ at jeanvelez69 at gmail.com
>>>>
>>>> To unsubscribe, send an email to
>>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>> --
>>> null
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>> To unsubscribe, send an email to
>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>>--
>>Chirp + Editcp + MD380Tools on Linux
>>Celestial!!!
>>Chuck -- KP4DJT
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/2d94dd5e/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 15
>>Date: Sun, 23 Aug 2020 21:15:32 -0700
>>From: Jeremiah Williams <jjherrera79 at yahoo.com>
>>Subject: [chirp_users] Baofeng UV-9r plus cable issues
>>To: chirp_users at intrepid.danplanet.com
>>Message-ID: <AA902D85-EDAF-4DD9-BD6E-49A22334F3E7 at yahoo.com>
>>Content-Type: text/plain; charset=utf-8
>>
>>My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>I?ve already tried all the things google info has. Download prolific etc...
>>
>>Jeremiah W.
>>
>>
>>------------------------------
>>
>>Message: 16
>>Date: Sun, 23 Aug 2020 22:02:18 -0700
>>From: Jardy <jardy72 at yahoo.com>
>>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>>To: Jeremiah Williams <jjherrera79 at yahoo.com>, Discussion of CHIRP
>> <chirp_users at intrepid.danplanet.com>
>>Message-ID: <15147F2F-2FD1-4A77-B6A5-97B8DFBE89C6 at yahoo.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>>Make sure you try to download from the radio before you write to the radio.
>>
>>Jardy Dawson WA7JRD
>>
>>Message sent by....Oh look!! Pretty lights!!
>>
>>
>>> On Aug 23, 2020, at 21:16, Jeremiah Williams via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>>>
>>> ?My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>> I?ve already tried all the things google info has. Download prolific etc...
>>>
>>> Jeremiah W.
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Jardy at jardy72 at yahoo.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/baa0da3c/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 17
>>Date: Mon, 24 Aug 2020 00:41:13 -0500
>>From: W Paul Mills <ac0hy at wpmills.com>
>>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>>To: Jeremiah Williams via chirp_users
>> <chirp_users at intrepid.danplanet.com>
>>Message-ID: <a1a17343-d2fd-1009-a6f8-1e91ccb9ca14 at wpmills.com>
>>Content-Type: text/plain; charset=utf-8; format=flowed
>>
>>Prolific driver is _NOT_ for use with a CH340 chip.
>>
>>Are you sure you are using the right COM port. What operating system are
>>you using? What is the exact error?
>>
>>On 8/23/20 11:15 PM, Jeremiah Williams via chirp_users wrote:
>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>> I?ve already tried all the things google info has. Download prolific etc...
>>>
>>> Jeremiah W.
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Paul AC0HY at ac0hy at wpmills.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>--
>>/**************************************************
>>* Amateur Radio Station AC0HY *
>>* W. Paul Mills SN807 *
>>* Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
>>* President Kaw Valley Amateur Radio Club *
>>**************************************************/
>>
>>
>>
>>------------------------------
>>
>>Message: 18
>>Date: Mon, 24 Aug 2020 07:05:47 -0400
>>From: Jim Unroe <rock.unroe at gmail.com>
>>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>>To: Jeremiah Williams <jjherrera79 at yahoo.com>, Discussion of CHIRP
>> <chirp_users at intrepid.danplanet.com>
>>Message-ID:
>> <CADnO8U7rG53c7-eVo1Wpc9=sjHHuH+qCb6oyRLRT9BJyBEpRiQ at mail.gmail.com>
>>Content-Type: text/plain; charset="UTF-8"
>>
>>On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
>><chirp_users at intrepid.danplanet.com> wrote:
>>>
>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>> I?ve already tried all the things google info has. Download prolific etc...
>>>
>>> Jeremiah W.
>>
>>What is the exact error (or better yet, attach a debug.log file)?
>>
>>Jim KC9HI
>>
>>
>>------------------------------
>>
>>Message: 19
>>Date: Mon, 24 Aug 2020 07:52:47 -0400
>>From: Jim Unroe <rock.unroe at gmail.com>
>>Subject: Re: [chirp_users] transferring channels from one radio
>> manuf.to another
>>To: robert moore <rm31859 at yahoo.com>, Discussion of CHIRP
>> <chirp_users at intrepid.danplanet.com>
>>Message-ID:
>> <CADnO8U7vS_vYAOnES3zMjHgQb1qd1yTD4BSKtUYSFfG1A+VJ1w at mail.gmail.com>
>>Content-Type: text/plain; charset="UTF-8"
>>
>>On Sun, Aug 23, 2020 at 2:56 PM robert moore via chirp_users
>><chirp_users at intrepid.danplanet.com> wrote:
>>>
>>> Hello all,
>>> I have been using chirp for a few years now to program my baofeng UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the channels and settings on my Baofeng are the exact same ones that i want to program in to my new Leixen. Is there a way to transfer the information from the Baofeng to the Leixen using chirp? thanks
>>>
>>> Robert/ KM4ORN
>>
>>Robert,
>>
>>The first thing you need to do is to make sure CHIRP can even program
>>your VV-898. Leixen has changed the radio since the original CHIRP
>>support was created and may have broken it (according to some open
>>issues).
>>
>>If CHIRP does program your VV-898 OK, then all you need to do is
>>import a saved CHIRP Radio Images (*.img) file from your UV-5R into a
>>tab from your VV-898. I use a UV-5R image as the master from
>>programming all of my CHIRP supported dual-band radios. A more
>>detailed explanation can be found here.
>>
>>https://baofengtech.com/CHIRPImport
>>
>>Jim KC9HI
>>
>>
>>------------------------------
>>
>>Message: 20
>>Date: Mon, 24 Aug 2020 12:04:32 +0000 (UTC)
>>From: richard ward <bonsai_man_uk at yahoo.co.uk>
>>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>Message-ID: <1611222254.7842485.1598270672351 at mail.yahoo.com>
>>Content-Type: text/plain; charset="utf-8"
>>
>> Yes you do have to upload whats already in the Radio even if youve set it to default to clear all IE the chinese channels? you can start a fresh page before your download withinin chirp? the download button will be available i/e more lit up when youve done that then cilck on the channels you want to download good luck
>> On Monday, 24 August 2020, 12:08:49 BST, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
>><chirp_users at intrepid.danplanet.com> wrote:
>>>
>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>> I?ve already tried all the things google info has. Download prolific etc...
>>>
>>> Jeremiah W.
>>
>>What is the exact error (or better yet, attach a debug.log file)?
>>
>>Jim KC9HI
>>_______________________________________________
>>chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>This message was sent to rich at bonsai_man_uk at yahoo.co.uk
>>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>-------------- next part --------------
>>An HTML attachment was scrubbed...
>>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/f98e36be/attachment-0001.html
>>
>>------------------------------
>>
>>Message: 21
>>Date: Mon, 24 Aug 2020 06:03:54 -0700
>>From: Jeremiah Williams <jjherrera79 at yahoo.com>
>>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>>To: Jim Unroe <rock.unroe at gmail.com>
>>Cc: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>Message-ID: <B942FE98-C427-4FED-891E-DC488C6B3B7F at yahoo.com>
>>Content-Type: text/plain; charset=utf-8
>>
>>Thank you all for your help. The message error says ?radio did not respond ?, but my radio light turn on and it starts to talk.
>>
>>
>>Jeremiah W.
>>
>>> On Aug 24, 2020, at 4:05 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>>
>>> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
>>> <chirp_users at intrepid.danplanet.com> wrote:
>>>>
>>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>>> I?ve already tried all the things google info has. Download prolific etc...
>>>>
>>>> Jeremiah W.
>>>
>>> What is the exact error (or better yet, attach a debug.log file)?
>>>
>>> Jim KC9HI
>>
>>
>>
>>------------------------------
>>
>>Message: 22
>>Date: Mon, 24 Aug 2020 13:26:33 -0400
>>From: "John La" <JohnLa at usa.net>
>>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>>To: "'Jeremiah Williams'" <jjherrera79 at yahoo.com>, "'Discussion of
>> CHIRP'" <chirp_users at intrepid.danplanet.com>
>>Message-ID: <039e01d67a3b$b6f61cd0$24e25670$@usa.net>
>>Content-Type: text/plain; charset="UTF-8"
>>
>>Here is a list of Common Error Messages
>>
>>www.Miklor.com/COM/UV_ErrorMess.php
>>
>>Stay safe and Stay healthy.
>>John K3NXU
>>
>>
>>-----Original Message-----
>>From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jeremiah Williams via chirp_users
>>Sent: Monday, August 24, 2020 9:04 AM
>>To: Jim Unroe
>>Cc: Discussion of CHIRP
>>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>>
>>Thank you all for your help. The message error says ?radio did not respond ?, but my radio light turn on and it starts to talk.
>>
>>
>>Jeremiah W.
>>
>>> On Aug 24, 2020, at 4:05 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>>
>>> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
>>> <chirp_users at intrepid.danplanet.com> wrote:
>>>>
>>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>>> I?ve already tried all the things google info has. Download prolific etc...
>>>>
>>>> Jeremiah W.
>>>
>>> What is the exact error (or better yet, attach a debug.log file)?
>>>
>>> Jim KC9HI
>>
>>_______________________________________________
>>chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>This message was sent to John LaMartina at johnla at usa.net
>>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>>------------------------------
>>
>>_______________________________________________
>>chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>End of chirp_users Digest, Vol 140, Issue 10
>>********************************************
>
>
>
>------------------------------
>
>Message: 3
>Date: Mon, 24 Aug 2020 17:13:39 -0400 (EDT)
>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Subject: Re: [chirp_users] chirp_users Digest, Vol 140, Issue 10
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <875065161.1455305.1598303619066 at email.ionos.com>
>Content-Type: text/plain; charset=UTF-8
>
>It worked until Radio Reference changed something in it's database.
>Radio Reference now wants you to have a paid account to download data.
>Chirp doesn't cater for paid accounts.
>
>
>> On 24 August 2020 at 16:02 Tommy Long <tjl1960 at gmail.com> wrote:
>>
>>
>> Do you ever think they will fix them to download radio reference ?
>>
>1, e-mail nigel at ngunn.net www http://www.ngunn.net
>
>
>------------------------------
>
>Message: 4
>Date: Mon, 24 Aug 2020 17:28:00 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Don
> Goodrich <don.goodrich at cheerful.com>
>Message-ID: <964843883.244695.1598315280062 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>Tried beveling the edges, no change. Thanks
>
>
>> On August 23, 2020 at 3:08 PM Don Goodrich <don.goodrich at cheerful.com> wrote:
>>
>> 1st the volume level has no effect on data transfer...
>>
>> Sometimes a little plastic shaving is needed. Shave carefuly a little off the plastic shroud around the cable male connector where it plugs into the radio as it interferes with the radio's case prventing the connector from solidly seating. This may be the issue here...
>>
>> Don Goodrich
>>don.goodrich at Cheerful.com
>> AF7DG
>>
>>
>>
>>
>> Sent: Sunday, August 23, 2020 at 2:55 PM
>> From: "Charles Gierke" <cgierke at cox.net>
>> To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>, "Alan Hill" <alan.r.hill at gmail.com>
>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>
>> NO luck yet. I held the plug in as far as it would go, no change. I turned the volume up all the way, no luck. I closed CHIRP and re-opened as Administrator,still no luck up or downloading.
>>
>> thanks for your assistance
>>
>>
>> > > On August 22, 2020 at 4:11 PM Alan Hill <alan.r.hill at gmail.com> wrote:
>> >
>> > Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp. Also turn the volume up from minimum. Last resort run chirp as adminstrator.
>> >
>> >
>> > On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke at cox.net mailto:cgierke at cox.net > wrote:
>> >
>> > > > >
>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> > >
>> > > On Friday all I got was the following message: Radio Did Not Respond.
>> > >
>> > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> > >
>> > >
>> > >
>> > > Any suggestions?
>> > >
>> > > Thanks Chuck KJ7INT
>> > >
>> > > _______________________________________________
>> > > chirp_users mailing list
>> > > chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > This message was sent to Silver Fox at alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com
>> > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>> > >
>> > > > > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Chuck at cgierke at cox.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > > _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich at cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>
>
>> _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck at cgierke at cox.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/4819e90e/attachment-0001.html
>
>------------------------------
>
>Message: 5
>Date: Mon, 24 Aug 2020 17:30:10 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, "Nigel
> A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Message-ID: <1860156832.244726.1598315410599 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>Scottsdale AZ.
>
>
>> On August 23, 2020 at 3:29 PM "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net> wrote:
>>
>> Might help if we knew where you were located.
>>
>>
>> > > On 23 August 2020 at 18:04 Charles Gierke <cgierke at cox.net> wrote:
>> >
>> > hi, still no luck.
>> > I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>> >
>> > thanks for the suggestions
>> >
>> >
>> > > > > On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>> > >
>> > > This may assist.
>> > > Www.Miklor.com/COM/UV_ErrorMess.php
>> > >
>> > > John
>> > > Www.Miklor.com/UV5R
>> > >
>> > >
>> > >
>> > > > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>> > > >
>> > > >
>> > > > > > >
>> > > > > > >
>> > > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> > > >
>> > > > On Friday all I got was the following message: Radio Did Not Respond.
>> > > >
>> > > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> > > >
>> > > >
>> > > > Any suggestions?
>> > > >
>> > > > Thanks Chuck KJ7INT
>> > > >
>> > > > _______________________________________________
>> > > > chirp_users mailing list
>> > > > chirp_users at intrepid.danplanet.com
>> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > > This message was sent to John LaMartina at johnla at usa.net
>> > > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> > > >
>> > > > > > >
>> > > > >
>> >
>> > > > > _______________________________________________
>> > > chirp_users mailing list
>> > > chirp_users at intrepid.danplanet.com
>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > This message was sent to Chuck at cgierke at cox.net
>> > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> > >
>> > > > > _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > >
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
>>
>>
>
>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/9787e285/attachment-0001.html
>
>------------------------------
>
>Message: 6
>Date: Mon, 24 Aug 2020 17:43:08 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>,
> Silverfox <alan.r.hill at gmail.com>, John LaMartina <JohnLa at usa.net>
>Message-ID: <1533201371.244929.1598316188290 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>thanks for the suggestion. Unfortunately, no luck.
>
>Chuck
>
>
>> On August 23, 2020 at 4:26 PM Silverfox <alan.r.hill at gmail.com> wrote:
>>
>>
>> I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
>>
>> Good luck.
>>
>> Alan
>>
>>
>>
>> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Charles Gierke
>> Sent: Sunday, August 23, 2020 3:05 PM
>> To: Discussion of CHIRP; John LaMartina
>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>
>>
>>
>> hi, still no luck.
>> I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>>
>> thanks for the suggestions
>>
>> <br<![endif] --> </br<![endif]>
>>
>> On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>>
>> This may assist.
>>
>>Www.Miklor.com/COM/UV_ErrorMess.php
>>
>>
>>
>> John
>>
>>Www.Miklor.com/UV5R
>>
>>
>>
>>
>> <br<![endif] --> </br<![endif]>
>>
>> On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>>
>> > >
>> > ?
>> >
>> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> >
>> > On Friday all I got was the following message: Radio Did Not Respond.
>> >
>> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> >
>> >
>> >
>> > Any suggestions?
>> >
>> > Thanks Chuck KJ7INT
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to John LaMartina at johnla at usa.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > >
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>>
>
>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/04ed9a31/attachment-0001.html
>
>------------------------------
>
>Message: 7
>Date: Mon, 24 Aug 2020 19:48:26 -0500
>From: "Glenn K0LNY" <glennervin at cableone.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
>Message-ID: <176201d67a79$71e43120$7001a8c0 at NUCPPYH>
>Content-Type: text/plain; charset="utf-8"
>
>Chuck,
>Have you tried the following?
>open device manager, and seeing which com ports show, and then unplug the cable, and see which one disappears, so you can select that port in Chirp.
>HTH.
>
>Glenn
>
>----- Original Message -----
>From: Charles Gierke
>To: Discussion of CHIRP ; Silverfox ; John LaMartina
>Sent: Monday, August 24, 2020 7:43 PM
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>
>
>thanks for the suggestion. Unfortunately, no luck.
>
>Chuck
>
>
> On August 23, 2020 at 4:26 PM Silverfox <alan.r.hill at gmail.com> wrote:
>
>
> I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
>
> Good luck.
>
> Alan
>
>
>
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Charles Gierke
> Sent: Sunday, August 23, 2020 3:05 PM
> To: Discussion of CHIRP; John LaMartina
> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>
>
>
> hi, still no luck.
> I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>
> thanks for the suggestions
>
> <!--[endif]-->
>
> On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>
> This may assist.
>
>Www.Miklor.com/COM/UV_ErrorMess.php
>
>
>
> John
>
>Www.Miklor.com/UV5R
>
>
>
>
> <!--[endif]-->
>
> On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>
> ?
>
> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>
> On Friday all I got was the following message: Radio Did Not Respond.
>
> I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>
>
>
> Any suggestions?
>
> Thanks Chuck KJ7INT
>
> _______________________________________________
> chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John LaMartina at johnla at usa.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
> _______________________________________________
> chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chuck at cgierke at cox.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chuck at cgierke at cox.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>--------------------------------------------------------------------------------
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Glenn at glennervin at cableone.net
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/f5d7164f/attachment-0001.html
>
>------------------------------
>
>Message: 8
>Date: Mon, 24 Aug 2020 17:57:44 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Glenn
> K0LNY <glennervin at cableone.net>
>Message-ID: <1718082396.245150.1598317064815 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)"
>I've always used COM 3 and it worked fine until last Wednesday.
>?
>
>> On August 24, 2020 at 5:48 PM Glenn K0LNY <glennervin at cableone.net> wrote:
>>
>> Chuck,
>> Have you tried the following?
>> open device manager, and seeing which com ports show, and then unplug the cable, and see which one disappears, so you can select that port in Chirp.
>> HTH.
>>
>> Glenn
>>
>> ----- Original Message -----
>> From: Charles Gierke mailto:cgierke at cox.net
>> To: Discussion of CHIRP mailto:chirp_users at intrepid.danplanet.com ; Silverfox mailto:alan.r.hill at gmail.com ; John LaMartina mailto:JohnLa at usa.net
>> Sent: Monday, August 24, 2020 7:43 PM
>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>
>> thanks for the suggestion. Unfortunately, no luck.
>>
>> Chuck
>>
>>
>> > > On August 23, 2020 at 4:26 PM Silverfox < alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com > wrote:
>> >
>> >
>> > I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
>> >
>> > Good luck.
>> >
>> > Alan
>> >
>> >
>> >
>> > From: chirp_users-bounces at intrepid.danplanet.com mailto:chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Charles Gierke
>> > Sent: Sunday, August 23, 2020 3:05 PM
>> > To: Discussion of CHIRP; John LaMartina
>> > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>> >
>> >
>> >
>> > hi, still no luck.
>> > I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>> >
>> > thanks for the suggestions
>> >
>> > <!--[endif]-->
>> >
>> > On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>> >
>> > This may assist.
>> >
>> > Www.Miklor.com/COM/UV_ErrorMess.php
>> >
>> >
>> >
>> > John
>> >
>> > Www.Miklor.com/UV5R
>> >
>> >
>> >
>> >
>> > <!--[endif]-->
>> >
>> > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>> >
>> > > > >
>> > > ?
>> > >
>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> > >
>> > > On Friday all I got was the following message: Radio Did Not Respond.
>> > >
>> > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> > >
>> > >
>> > >
>> > > Any suggestions?
>> > >
>> > > Thanks Chuck KJ7INT
>> > >
>> > > _______________________________________________
>> > > chirp_users mailing list
>> > > chirp_users at intrepid.danplanet.com
>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > This message was sent to John LaMartina at johnla at usa.net
>> > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> > >
>> > > > >
>> >
>> >
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Chuck at cgierke at cox.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> >
>> >
>> >
>> > >
>>
>> > > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Chuck at cgierke at cox.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > >
>>
>>
>> ---------------------------------------------
>>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Glenn at glennervin at cableone.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/53073a9d/attachment-0001.html
>
>------------------------------
>
>Message: 9
>Date: Mon, 24 Aug 2020 18:09:00 -0700
>From: "Peter J. McClosky" <pmcclosky at earthlink.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <3D5983EB-4E9A-4974-B161-606E766E01CB at earthlink.net>
>Content-Type: text/plain; charset="utf-8"
>
>Hello,
>
>I have programed well over a hundred UV-5x radios and have had both easy and hard times programing them.
>
>One thing that I learned is to slow down, waiting about 10 seconds between actions taken on the computer. This solve most of the error problems.
>
>If that does not work, most of the rest to the time ,it is solved by pushing the programing cable into the radio and keep pressure on the cable until the pride is programed. I have to push it VERY hard.
>
>On a windows machines you have to select the right com port (I am mostly a mac person so I find the right port by trial and error).
>
>As an aside, using more that 60 cables to program the radios, I have only found one cable that was defective, so that is most likely, not the problem.
>-----
>Peter J. McClosky, N7IY
>Eugene, Oregon
>pmcclosky at earthlink.net
>n7iy at arrl.net
>http://home.earthlink.net/~pmcclosky/
>
>> On Aug 24, 2020, at 5:43 PM, Charles Gierke <cgierke at cox.net> wrote:
>>
>> thanks for the suggestion. Unfortunately, no luck.
>>
>> Chuck
>>
>>> On August 23, 2020 at 4:26 PM Silverfox <alan.r.hill at gmail.com <mailto:alan.r.hill at gmail.com>> wrote:
>>>
>>> I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
>>> Good luck.
>>> Alan
>>>
>>> From: chirp_users-bounces at intrepid.danplanet.com <mailto:chirp_users-bounces at intrepid.danplanet.com> [mailto:chirp_users-bounces at intrepid.danplanet.com <mailto:chirp_users-bounces at intrepid.danplanet.com>] On Behalf Of Charles Gierke
>>> Sent: Sunday, August 23, 2020 3:05 PM
>>> To: Discussion of CHIRP; John LaMartina
>>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>>
>>> hi, still no luck.
>>> I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>>>
>>> thanks for the suggestions
>>>
>>>
>>>
>>> On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net <mailto:JohnLa at usa.net>> wrote:
>>>
>>> This may assist.
>>>Www.Miklor.com/COM/UV_ErrorMess.php <http://www.miklor.com/COM/UV_ErrorMess.php>
>>>
>>> John
>>>Www.Miklor.com/UV5R <http://www.miklor.com/UV5R>
>>>
>>>
>>>
>>>
>>> On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net <mailto:cgierke at cox.net>> wrote:
>>>
>>> ?
>>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>>
>>> On Friday all I got was the following message: Radio Did Not Respond.
>>>
>>> I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>>
>>>
>>> Any suggestions?
>>>
>>> Thanks Chuck KJ7INT
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>> This message was sent to John LaMartina at johnla at usa.net <mailto:johnla at usa.net>
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>> This message was sent to Chuck at cgierke at cox.net <mailto:cgierke at cox.net>
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>>
>>>
>>
>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>> This message was sent to Chuck at cgierke at cox.net <mailto:cgierke at cox.net>
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>> This message was sent to Peter at pmcclosky at earthlink.net <mailto:pmcclosky at earthlink.net>
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/7b34939d/attachment-0001.html
>
>------------------------------
>
>Message: 10
>Date: Mon, 24 Aug 2020 21:09:34 -0400 (EDT)
>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <1969575162.1460715.1598317774812 at email.ionos.com>
>Content-Type: text/plain; charset="utf-8"
>
>Have you had a Windows update that has taken your CH340 driver out? Windows has a habit of removing unsigned drivers.
>
>
>> On 24 August 2020 at 20:57 Charles Gierke <cgierke at cox.net> wrote:
>>
>> Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)"
>> I've always used COM 3 and it worked fine until last Wednesday.
>>
>>
>> > > On August 24, 2020 at 5:48 PM Glenn K0LNY <glennervin at cableone.net> wrote:
>> >
>> > Chuck,
>> > Have you tried the following?
>> > open device manager, and seeing which com ports show, and then unplug the cable, and see which one disappears, so you can select that port in Chirp.
>> > HTH.
>> >
>> > Glenn
>> >
>> > ----- Original Message -----
>> > From: Charles Gierke mailto:cgierke at cox.net
>> > To: Discussion of CHIRP mailto:chirp_users at intrepid.danplanet.com ; Silverfox mailto:alan.r.hill at gmail.com ; John LaMartina mailto:JohnLa at usa.net
>> > Sent: Monday, August 24, 2020 7:43 PM
>> > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>> >
>> > thanks for the suggestion. Unfortunately, no luck.
>> >
>> > Chuck
>> >
>> >
>> > > > > On August 23, 2020 at 4:26 PM Silverfox < alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com > wrote:
>> > >
>> > >
>> > > I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
>> > >
>> > > Good luck.
>> > >
>> > > Alan
>> > >
>> > >
>> > > From: chirp_users-bounces at intrepid.danplanet.com mailto:chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Charles Gierke
>> > > Sent: Sunday, August 23, 2020 3:05 PM
>> > > To: Discussion of CHIRP; John LaMartina
>> > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>> > >
>> > >
>> > > hi, still no luck.
>> > > I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>> > >
>> > > thanks for the suggestions
>> > >
>> > > <!--[endif]-->
>> > >
>> > > On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>> > >
>> > > This may assist.
>> > >
>> > > Www.Miklor.com/COM/UV_ErrorMess.php
>> > >
>> > >
>> > > John
>> > >
>> > > Www.Miklor.com/UV5R
>> > >
>> > >
>> > >
>> > > <!--[endif]-->
>> > >
>> > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>> > >
>> > > > > > >
>> > > >
>> > > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> > > >
>> > > > On Friday all I got was the following message: Radio Did Not Respond.
>> > > >
>> > > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> > > >
>> > > >
>> > > > Any suggestions?
>> > > >
>> > > > Thanks Chuck KJ7INT
>> > > >
>> > > > _______________________________________________
>> > > > chirp_users mailing list
>> > > > chirp_users at intrepid.danplanet.com
>> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > > This message was sent to John LaMartina at johnla at usa.net
>> > > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> > > >
>> > > > > > >
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > chirp_users mailing list
>> > > chirp_users at intrepid.danplanet.com
>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > This message was sent to Chuck at cgierke at cox.net
>> > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> > >
>> > >
>> > >
>> > >
>> > > > >
>> >
>> > > > > _______________________________________________
>> > > chirp_users mailing list
>> > > chirp_users at intrepid.danplanet.com
>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > This message was sent to Chuck at cgierke at cox.net
>> > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> > >
>> > > > >
>> >
>> >
>> >
>> > ---------------------------------------------
>> >
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Glenn at glennervin at cableone.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > >
>>
>> > > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Chuck at cgierke at cox.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > > _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
>
>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/c101a07e/attachment-0001.html
>
>------------------------------
>
>Message: 11
>Date: Mon, 24 Aug 2020 20:33:07 -0500
>From: Chuck Hast <kp4djt at gmail.com>
>Subject: Re: [chirp_users] chirp_users Digest, Vol 140, Issue 10
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAN9xdP_TsZFsFVM+uydCS7e4q9WgKHj+uLtiZjiBVKKYDH_TnA at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>On Mon, Aug 24, 2020 at 3:05 PM Tommy Long <tjl1960 at gmail.com> wrote:
>
>> Do you ever think they will fix them to download radio reference ?
>>
>> Guys n gals, please please do not just blindly hit the send reply and
>send your whole digest of message out. Sometimes you miss something
>that got appended to the end of the digest and you have to dig down and
>make sure nothing is lost.
>
>Celestial!!!
>Chuck -- KP4DJT
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/7ba42fd0/attachment-0001.html
>
>------------------------------
>
>Message: 12
>Date: Tue, 25 Aug 2020 09:14:46 -0700
>From: Ted Timmons <ted at perljam.net>
>Subject: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAK7GBH-089mryCX=sUaQYFRZ6t1iXAzYA38-mYqoR0zHCHTC-g at mail.gmail.com>
>Content-Type: text/plain; charset="UTF-8"
>
>Hi, I have a x86 20.04 system, I can't find the PPA even after doing
>apt-add-repository and similar steps. Roughly, I'd expect this to
>return something:
>$ apt search chirp
>
>or this to work:
>$ apt install chirp-daily
>E: Unable to locate package chirp-daily
>
>Are there known problems finding chirp-daily in the "focal" packages?
>Here's a sample to back it up.
>
>$ lsb_release -a
>Distributor ID: Ubuntu
>Description: Ubuntu 20.04 LTS
>Release: 20.04
>Codename: focal
>
>$ cat /etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list
>deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal main
># deb-src http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal main
>$ head -16 /var/lib/apt/lists/ppa.launchpad.net_dansmith_chirp-snapshots_ubuntu_dists_focal_InRelease
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA512
>
>Origin: LP-PPA-dansmith-chirp-snapshots
>Label: CHIRP Daily Snapshots
>Suite: focal
>Version: 20.04
>Codename: focal
>Date: Fri, 07 Aug 2020 7:17:00 UTC
>Architectures: amd64 arm64 armhf i386 ppc64el riscv64 s390x
>Components: main
>Description: Ubuntu Focal 20.04
>MD5Sum:
>3f49c1f6dff8f224953b8a84efb0841e 135 main/binary-amd64/Release
>8dc5aea5b03dff8595f096f9e368e888 32 main/binary-amd64/Packages.xz
>fa9ac5a217b5547bc7dd4e6e894fe135 20 main/binary-amd64/Packages.gz
>$ apt search chirp
>Sorting... Done
>Full Text Search... Done
>coop-computing-tools/focal 7.0.22-1ubuntu1 amd64
>cooperative computing tools
>$ apt search chirp-daily
>Sorting... Done
>Full Text Search... Done
>
>Thanks,
>Ted
>
>
>------------------------------
>
>Message: 13
>Date: Tue, 25 Aug 2020 11:35:48 -0500
>From: Allen Roark <allenroark at gmail.com>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAKqkKmnp27s+eU_cm5t3Z_Mc7DO3U0MxcAwN9hFqbuarQx92Dw at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>Ted,
>
>I have a laptop with Windows 10 and a MacBook Air running the Catalina
>OS.
>I've downloaded the most currentI have a BaoFeng BF-F8HP. It is
>currently
>programmed with the Mississippi frequencies. I now live in Saint
>Gabriel,
>LA (just outside of Baton Rouge.) I am a SkyWarn Storm Spotter and Net
>Control Operator (KD5GMC - General Class). With Hurricane Laura bearing
>down on us, I need to get it up and running ASAP!
>
>Thanks,
>Allen Roark
>(225) 955-3365
>
>On Tue, Aug 25, 2020 at 11:15 AM Ted Timmons <ted at perljam.net> wrote:
>
> > Hi, I have a x86 20.04 system, I can't find the PPA even after doing
> > apt-add-repository and similar steps. Roughly, I'd expect this to
> > return something:
> > $ apt search chirp
> >
> > or this to work:
> > $ apt install chirp-daily
> > E: Unable to locate package chirp-daily
> >
> > Are there known problems finding chirp-daily in the "focal" packages?
> > Here's a sample to back it up.
> >
> > $ lsb_release -a
> > Distributor ID: Ubuntu
> > Description: Ubuntu 20.04 LTS
> > Release: 20.04
> > Codename: focal
> >
> > $ cat
>/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list
> > deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal
>main
> > # deb-src http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>focal
> > main
> > $ head -16
> >
>/var/lib/apt/lists/ppa.launchpad.net_dansmith_chirp-snapshots_ubuntu_dists_focal_InRelease
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA512
> >
> > Origin: LP-PPA-dansmith-chirp-snapshots
> > Label: CHIRP Daily Snapshots
> > Suite: focal
> > Version: 20.04
> > Codename: focal
> > Date: Fri, 07 Aug 2020 7:17:00 UTC
> > Architectures: amd64 arm64 armhf i386 ppc64el riscv64 s390x
> > Components: main
> > Description: Ubuntu Focal 20.04
> > MD5Sum:
> > 3f49c1f6dff8f224953b8a84efb0841e 135
> > main/binary-amd64/Release
> > 8dc5aea5b03dff8595f096f9e368e888 32
> > main/binary-amd64/Packages.xz
> > fa9ac5a217b5547bc7dd4e6e894fe135 20
> > main/binary-amd64/Packages.gz
> > $ apt search chirp
> > Sorting... Done
> > Full Text Search... Done
> > coop-computing-tools/focal 7.0.22-1ubuntu1 amd64
> > cooperative computing tools
> > $ apt search chirp-daily
> > Sorting... Done
> > Full Text Search... Done
> >
> > Thanks,
> > Ted
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Allen Roark at allenroark at gmail.com
> > To unsubscribe, send an email to
> > chirp_users-unsubscribe at intrepid.danplanet.com
> >
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/50535776/attachment-0001.html
>
>------------------------------
>
>Message: 14
>Date: Tue, 25 Aug 2020 11:45:52 -0500
>From: wa0sbu at kslimmer.com
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: chirp_users at intrepid.danplanet.com
>Message-ID: <8798433e-9878-f4fe-7d9c-f259e177f68a at kslimmer.com>
>Content-Type: text/plain; charset=utf-8; format=flowed
>
>Ted;
>
>?? You will have to do some manual editing to install Chirp on a 20.04
>system.
>
>I hope this helps,
>
>You don't need to download Python 2.7 from the Python WEB page, or
>download
>the flatpak.
>Its in Focals,(20.04)Repositories.
>
>These are all terminal commands, don't use the quotes.
>
>"sudo apt install python2"? will install 2.7
>
>"ls -ls /usr/bin/python*"? will list your versions of python installed.
>In my case 2.7 and 3.8
>
>Add the Chirp repository:
>
>"sudo apt-add-repository ppa:dansmith/chirp-snapshots"
>
>Next Step from The Chirp WEB page:
>
>"sudo apt-get install chirp-daily"
>
>Returns an error.
>
>"E: Unable to locate package chirp-daily"
>
>In terminal, open your file manager as sudo.
>I use Xubuntu, so I use "Sudo thunar" Your command will
>match your desktop.
>
>Using mousepad, or text editor,
>Edit,
>"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list"
>
>Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>focal main"
>to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>bionic
>main"
>
>"sudo apt update"
>"sudo apt-get install chirp-daily"
>
>Another error:
>"The following packages have unmet dependencies" And a list of 4 of
>them.
>
>All http: commands are in your favorite browser.
>All the other commands are at terminal.
>
>Download the first missing file:
>
>"https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"
>
>"cd Downloads"
>
>"sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb"
>Another error:
>"sudo apt install -f"
>"sudo apt-get install chirp-daily"
>
>Now we are down to 3 missing dependencies.
>
>Download the first from here:
>
>"https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"
>
>"sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb"
>"sudo apt install -f"
>"sudo apt-get install chirp-daily"
>
>Down to 2 missing, getting closer.
>
>
>Download the next one from here"
>
>"https://packages.ubuntu.com/bionic/all/python-serial/download"
>? "sudo dpkg -i python-serial_3.4-2_all.deb"
>
>
>?There, now we are down to 1 missing:
>
>Download from here:
>
>"https://packages.ubuntu.com/bionic/all/python-suds/download"
>?"sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb"
>
>Another error:
>
>"sudo apt install -f"
>
>"sudo apt-get install chirp-daily"
>
>It installed,? chirpw returns an error;
>?"python-future" is missing.
>
>"https://packages.ubuntu.com/bionic/all/python-future/download"
>
>"sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb"
>
>
>Another dependency error:
>
>"sudo apt install -f"
>
>"chirpw"? its running.
>
>
>On 8/25/20 11:14 AM, Ted Timmons wrote:
>
> > Hi, I have a x86 20.04 system, I can't find the PPA even after doing
> > apt-add-repository and similar steps. Roughly, I'd expect this to
> > return something:
> > $ apt search chirp
> >
> > Thanks,
> > Ted
>
>
>------------------------------
>
>Message: 15
>Date: Tue, 25 Aug 2020 12:02:03 -0500
>From: "Glenn K0LNY" <glennervin at cableone.net>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
>Message-ID: <005501d67b01$756deb50$7001a8c0 at NUCPPYH>
>Content-Type: text/plain; charset="UTF-8"
>
>Are you kidding?
>I've used Ubuntu since version 8, and often go to Ubuntu for certain
>tasks,
>because I am still a windows user, and I used DOS quite a bit back in
>the
>day, and still recall all the CLI commands of DOS.
>But I use Linux for chirp for screenreader reasons, Chirp is
>challenging in
>windows with a screenreader.
>But reading all this makes my head spin.
>Even if the Linux CLI was my strength, I can't imagine doing all that.
>I'd sooner install a live Linux that still uses the old repository for
>use
>with Chirp.
>But to each their own, JMO.
>BTW, Why aren't there scripts to do all that?
>
>Glenn
>----- Original Message -----
>From: <wa0sbu at kslimmer.com>
>To: <chirp_users at intrepid.danplanet.com>
>Sent: Tuesday, August 25, 2020 11:45 AM
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
>Ubuntu
>20.04
>
>
>Ted;
>
>You will have to do some manual editing to install Chirp on a 20.04
>system.
>
>I hope this helps,
>
>You don't need to download Python 2.7 from the Python WEB page, or
>download
>the flatpak.
>Its in Focals,(20.04)Repositories.
>
>These are all terminal commands, don't use the quotes.
>
>"sudo apt install python2" will install 2.7
>
>"ls -ls /usr/bin/python*" will list your versions of python installed.
>In my case 2.7 and 3.8
>
>Add the Chirp repository:
>
>"sudo apt-add-repository ppa:dansmith/chirp-snapshots"
>
>Next Step from The Chirp WEB page:
>
>"sudo apt-get install chirp-daily"
>
>Returns an error.
>
>"E: Unable to locate package chirp-daily"
>
>In terminal, open your file manager as sudo.
>I use Xubuntu, so I use "Sudo thunar" Your command will
>match your desktop.
>
>Using mousepad, or text editor,
>Edit,
>"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list"
>
>Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>focal main"
>to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>bionic
>main"
>
>"sudo apt update"
>"sudo apt-get install chirp-daily"
>
>Another error:
>"The following packages have unmet dependencies" And a list of 4 of
>them.
>
>All http: commands are in your favorite browser.
>All the other commands are at terminal.
>
>Download the first missing file:
>
>"https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"
>
>"cd Downloads"
>
>"sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb"
>Another error:
>"sudo apt install -f"
>"sudo apt-get install chirp-daily"
>
>Now we are down to 3 missing dependencies.
>
>Download the first from here:
>
>"https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"
>
>"sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb"
>"sudo apt install -f"
>"sudo apt-get install chirp-daily"
>
>Down to 2 missing, getting closer.
>
>
>Download the next one from here"
>
>"https://packages.ubuntu.com/bionic/all/python-serial/download"
>"sudo dpkg -i python-serial_3.4-2_all.deb"
>
>
>There, now we are down to 1 missing:
>
>Download from here:
>
>"https://packages.ubuntu.com/bionic/all/python-suds/download"
>"sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb"
>
>Another error:
>
>"sudo apt install -f"
>
>"sudo apt-get install chirp-daily"
>
>It installed, chirpw returns an error;
>"python-future" is missing.
>
>"https://packages.ubuntu.com/bionic/all/python-future/download"
>
>"sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb"
>
>
>Another dependency error:
>
>"sudo apt install -f"
>
>"chirpw" its running.
>
>
>On 8/25/20 11:14 AM, Ted Timmons wrote:
>
> > Hi, I have a x86 20.04 system, I can't find the PPA even after doing
> > apt-add-repository and similar steps. Roughly, I'd expect this to
> > return something:
> > $ apt search chirp
> >
> > Thanks,
> > Ted
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Glenn at glennervin at cableone.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>------------------------------
>
>Message: 16
>Date: Tue, 25 Aug 2020 13:35:33 -0400 (EDT)
>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <1167922807.17234.1598376933246 at email.ionos.com>
>Content-Type: text/plain; charset=UTF-8
>
>It might not be in FOCAL. I always look in XENIAL for Chirp updates.
>
> > On 25/08/2020 12:14 Ted Timmons <ted at perljam.net> wrote:
> >
> >
> > Hi, I have a x86 20.04 system, I can't find the PPA even after doing
> > apt-add-repository and similar steps. Roughly, I'd expect this to
> > return something:
> > $ apt search chirp
> >
> > or this to work:
> > $ apt install chirp-daily
> > E: Unable to locate package chirp-daily
> >
> > Are there known problems finding chirp-daily in the "focal" packages?
> > Here's a sample to back it up.
> >
> > $ lsb_release -a
> > Distributor ID: Ubuntu
> > Description: Ubuntu 20.04 LTS
> > Release: 20.04
> > Codename: focal
> >
> > $ cat
>/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list
> > deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu focal
>main
> > # deb-src http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>focal main
> > $ head -16
>/var/lib/apt/lists/ppa.launchpad.net_dansmith_chirp-snapshots_ubuntu_dists_focal_InRelease
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA512
> >
> > Origin: LP-PPA-dansmith-chirp-snapshots
> > Label: CHIRP Daily Snapshots
> > Suite: focal
> > Version: 20.04
> > Codename: focal
> > Date: Fri, 07 Aug 2020 7:17:00 UTC
> > Architectures: amd64 arm64 armhf i386 ppc64el riscv64 s390x
> > Components: main
> > Description: Ubuntu Focal 20.04
> > MD5Sum:
> > 3f49c1f6dff8f224953b8a84efb0841e 135 main/binary-amd64/Release
> > 8dc5aea5b03dff8595f096f9e368e888 32 main/binary-amd64/Packages.xz
> > fa9ac5a217b5547bc7dd4e6e894fe135 20 main/binary-amd64/Packages.gz
> > $ apt search chirp
> > Sorting... Done
> > Full Text Search... Done
> > coop-computing-tools/focal 7.0.22-1ubuntu1 amd64
> > cooperative computing tools
> > $ apt search chirp-daily
> > Sorting... Done
> > Full Text Search... Done
> >
> > Thanks,
> > Ted
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www
>http://www.ngunn.net
>
>
>------------------------------
>
>Message: 17
>Date: Tue, 25 Aug 2020 17:37:59 +0000
>From: Tony Fuller <goldstar611 at hotmail.com>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <MN2PR10MB31048EFB3E1F9750E533516AED570 at MN2PR10MB3104.namprd10.prod.outlook.com>
>
>Content-Type: text/plain; charset="us-ascii"
>
>I'm still of the belief that it's easier to install flat pak and then
>install the chirp flatpak package vs a number of command line
>operations.
>
>The flatpak files get published next to the Windows I stalled and Mac
>application. https://trac.chirp.danplanet.com/chirp_daily/LATEST/
>
>
>Tony.
>________________________________
>From: chirp_users-bounces at intrepid.danplanet.com
><chirp_users-bounces at intrepid.danplanet.com> on behalf of Glenn K0LNY
><glennervin at cableone.net>
>Sent: Tuesday, August 25, 2020 12:02:03 PM
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
>Ubuntu 20.04
>
>Are you kidding?
>I've used Ubuntu since version 8, and often go to Ubuntu for certain
>tasks,
>because I am still a windows user, and I used DOS quite a bit back in
>the
>day, and still recall all the CLI commands of DOS.
>But I use Linux for chirp for screenreader reasons, Chirp is
>challenging in
>windows with a screenreader.
>But reading all this makes my head spin.
>Even if the Linux CLI was my strength, I can't imagine doing all that.
>I'd sooner install a live Linux that still uses the old repository for
>use
>with Chirp.
>But to each their own, JMO.
>BTW, Why aren't there scripts to do all that?
>
>Glenn
>----- Original Message -----
>From: <wa0sbu at kslimmer.com>
>To: <chirp_users at intrepid.danplanet.com>
>Sent: Tuesday, August 25, 2020 11:45 AM
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
>Ubuntu
>20.04
>
>
>Ted;
>
>You will have to do some manual editing to install Chirp on a 20.04
>system.
>
>I hope this helps,
>
>You don't need to download Python 2.7 from the Python WEB page, or
>download
>the flatpak.
>Its in Focals,(20.04)Repositories.
>
>These are all terminal commands, don't use the quotes.
>
>"sudo apt install python2" will install 2.7
>
>"ls -ls /usr/bin/python*" will list your versions of python installed.
>In my case 2.7 and 3.8
>
>Add the Chirp repository:
>
>"sudo apt-add-repository ppa:dansmith/chirp-snapshots"
>
>Next Step from The Chirp WEB page:
>
>"sudo apt-get install chirp-daily"
>
>Returns an error.
>
>"E: Unable to locate package chirp-daily"
>
>In terminal, open your file manager as sudo.
>I use Xubuntu, so I use "Sudo thunar" Your command will
>match your desktop.
>
>Using mousepad, or text editor,
>Edit,
>"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list"
>
>Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>focal main"
>to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>bionic
>main"
>
>"sudo apt update"
>"sudo apt-get install chirp-daily"
>
>Another error:
>"The following packages have unmet dependencies" And a list of 4 of
>them.
>
>All http: commands are in your favorite browser.
>All the other commands are at terminal.
>
>Download the first missing file:
>
>"https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"
>
>"cd Downloads"
>
>"sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb"
>Another error:
>"sudo apt install -f"
>"sudo apt-get install chirp-daily"
>
>Now we are down to 3 missing dependencies.
>
>Download the first from here:
>
>"https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"
>
>"sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb"
>"sudo apt install -f"
>"sudo apt-get install chirp-daily"
>
>Down to 2 missing, getting closer.
>
>
>Download the next one from here"
>
>"https://packages.ubuntu.com/bionic/all/python-serial/download"
>"sudo dpkg -i python-serial_3.4-2_all.deb"
>
>
>There, now we are down to 1 missing:
>
>Download from here:
>
>"https://packages.ubuntu.com/bionic/all/python-suds/download"
>"sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb"
>
>Another error:
>
>"sudo apt install -f"
>
>"sudo apt-get install chirp-daily"
>
>It installed, chirpw returns an error;
>"python-future" is missing.
>
>"https://packages.ubuntu.com/bionic/all/python-future/download"
>
>"sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb"
>
>
>Another dependency error:
>
>"sudo apt install -f"
>
>"chirpw" its running.
>
>
>On 8/25/20 11:14 AM, Ted Timmons wrote:
>
> > Hi, I have a x86 20.04 system, I can't find the PPA even after doing
> > apt-add-repository and similar steps. Roughly, I'd expect this to
> > return something:
> > $ apt search chirp
> >
> > Thanks,
> > Ted
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Glenn at glennervin at cableone.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Tony F at goldstar611 at hotmail.com
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/30eeb914/attachment-0001.html
>
>------------------------------
>
>Message: 18
>Date: Tue, 25 Aug 2020 13:43:11 -0400 (EDT)
>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <1540639094.17653.1598377391856 at email.ionos.com>
>Content-Type: text/plain; charset=UTF-8
>
>The issue is that Ubuntu generates a new repository every 6 months with
>each update. Most developers can't keep up with that and only keep up
>the LTS repositories.
>
>
>
> > On 25/08/2020 13:02 Glenn K0LNY <glennervin at cableone.net> wrote:
> >
> >
> > Are you kidding?
>
>
>------------------------------
>
>Message: 19
>Date: Tue, 25 Aug 2020 10:51:33 -0700
>From: Ted Timmons <ted at perljam.net>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAK7GBH_jVCciazVdNAJNnXBCwjLVOq0=KnS29PXU6xgiF1DTuA at mail.gmail.com>
>Content-Type: text/plain; charset="UTF-8"
>
>Aha, I thought some manual magic might be required. I "gave up" and
>went the flatpak route instead like Tony said:
>
>apt install -y flatpak gnome-software-plugin-flatpak
>flatpak remote-add --if-not-exists flathub
>https://flathub.org/repo/flathub.flatpakrepo
>flatpak install chirp-daily-20200807.flatpak
>
>It then starts fine with:
>flatpak run com.danplanet.chirp
>
>I'm still working through serial/USB issues but I know how to handle
>those, generally.
>
>
>On Tue, Aug 25, 2020 at 9:47 AM <wa0sbu at kslimmer.com> wrote:
> >
> > Ted;
> >
> > You will have to do some manual editing to install Chirp on a 20.04
> > system.
> >
> > I hope this helps,
> >
> > You don't need to download Python 2.7 from the Python WEB page, or
>download
> > the flatpak.
> > Its in Focals,(20.04)Repositories.
> >
> > These are all terminal commands, don't use the quotes.
> >
> > "sudo apt install python2" will install 2.7
> >
> > "ls -ls /usr/bin/python*" will list your versions of python
>installed.
> > In my case 2.7 and 3.8
> >
> > Add the Chirp repository:
> >
> > "sudo apt-add-repository ppa:dansmith/chirp-snapshots"
> >
> > Next Step from The Chirp WEB page:
> >
> > "sudo apt-get install chirp-daily"
> >
> > Returns an error.
> >
> > "E: Unable to locate package chirp-daily"
> >
> > In terminal, open your file manager as sudo.
> > I use Xubuntu, so I use "Sudo thunar" Your command will
> > match your desktop.
> >
> > Using mousepad, or text editor,
> > Edit,
>"/etc/apt/sources.list.d/dansmith-ubuntu-chirp-snapshots-focal.list"
> >
> > Change: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
> > focal main"
> > to: "deb http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu
>bionic
> > main"
> >
> > "sudo apt update"
> > "sudo apt-get install chirp-daily"
> >
> > Another error:
> > "The following packages have unmet dependencies" And a list of 4 of
>them.
> >
> > All http: commands are in your favorite browser.
> > All the other commands are at terminal.
> >
> > Download the first missing file:
> >
> > "https://packages.ubuntu.com/bionic/amd64/python-libxslt1/download"
> >
> > "cd Downloads"
> >
> > "sudo dpkg -i python-libxslt1_1.1.29-5ubuntu0.2_amd64.deb"
> > Another error:
> > "sudo apt install -f"
> > "sudo apt-get install chirp-daily"
> >
> > Now we are down to 3 missing dependencies.
> >
> > Download the first from here:
> >
> > "https://packages.ubuntu.com/bionic/amd64/python-gtk2/download"
> >
> > "sudo dpkg -i python-gtk2_2.24.0-5.1ubuntu2_amd64.deb"
> > "sudo apt install -f"
> > "sudo apt-get install chirp-daily"
> >
> > Down to 2 missing, getting closer.
> >
> >
> > Download the next one from here"
> >
> > "https://packages.ubuntu.com/bionic/all/python-serial/download"
> > "sudo dpkg -i python-serial_3.4-2_all.deb"
> >
> >
> > There, now we are down to 1 missing:
> >
> > Download from here:
> >
> > "https://packages.ubuntu.com/bionic/all/python-suds/download"
> > "sudo dpkg -i python-suds_0.7~git20150727.94664dd-5_all.deb"
> >
> > Another error:
> >
> > "sudo apt install -f"
> >
> > "sudo apt-get install chirp-daily"
> >
> > It installed, chirpw returns an error;
> > "python-future" is missing.
> >
> > "https://packages.ubuntu.com/bionic/all/python-future/download"
> >
> > "sudo dpkg -i python-future_0.15.2-4ubuntu2_all.deb"
> >
> >
> > Another dependency error:
> >
> > "sudo apt install -f"
> >
> > "chirpw" its running.
> >
> >
> > On 8/25/20 11:14 AM, Ted Timmons wrote:
> >
> > > Hi, I have a x86 20.04 system, I can't find the PPA even after
>doing
> > > apt-add-repository and similar steps. Roughly, I'd expect this to
> > > return something:
> > > $ apt search chirp
> > >
> > > Thanks,
> > > Ted
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Ted Timmons at ted at perljam.net
> > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>------------------------------
>
>Message: 20
>Date: Tue, 25 Aug 2020 14:01:37 -0400 (EDT)
>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Ted
> Timmons <ted at perljam.net>
>Message-ID: <223574469.13903.1598378498043 at email.ionos.com>
>Content-Type: text/plain; charset=UTF-8
>
>Don't you have to install flatpack software? My install doesn't know
>what a flatpack is.
>
>
> > On 25/08/2020 13:51 Ted Timmons <ted at perljam.net> wrote:
> >
> >
> > Aha, I thought some manual magic might be required. I "gave up" and
> > went the flatpak route instead like Tony said:
> >
>
>
>------------------------------
>
>Message: 21
>Date: Tue, 25 Aug 2020 11:09:23 -0700
>From: Ted Timmons <ted at perljam.net>
>Subject: Re: [chirp_users] oddities (failures) finding/installing on
> Ubuntu 20.04
>Cc: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAK7GBH_1tbmS55C-Ed_F8NnokZeC3Bs5qN5jU3u0gJF=6Ad=9Q at mail.gmail.com>
>Content-Type: text/plain; charset="UTF-8"
>
>On Tue, Aug 25, 2020 at 11:01 AM Nigel A. Gunn G8IFF/W8IFF
><nigel at ngunn.net> wrote:
> > Don't you have to install flatpack software? My install doesn't know
>what a flatpack is.
>
>Yes, that is taken care of in the first line of the install steps I
>gave:
>
>apt install -y flatpak gnome-software-plugin-flatpak
>flatpak remote-add --if-not-exists flathub
>https://flathub.org/repo/flathub.flatpakrepo
>flatpak install chirp-daily-20200807.flatpak
>
>
>------------------------------
>
>Message: 22
>Date: Tue, 25 Aug 2020 11:14:51 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, "Nigel
> A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Message-ID: <889759977.252025.1598379291234 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>Installed driver is the latest version
>
>
> > On August 24, 2020 at 6:09 PM "Nigel A. Gunn G8IFF/W8IFF"
><nigel at ngunn.net> wrote:
> >
> > Have you had a Windows update that has taken your CH340 driver out?
>Windows has a habit of removing unsigned drivers.
> >
> >
> > > > On 24 August 2020 at 20:57 Charles Gierke <cgierke at cox.net>
>wrote:
> > >
> > > Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)"
> > > I've always used COM 3 and it worked fine until last Wednesday.
> > >
> > >
> > > > > > On August 24, 2020 at 5:48 PM Glenn K0LNY
><glennervin at cableone.net> wrote:
> > > >
> > > > Chuck,
> > > > Have you tried the following?
> > > > open device manager, and seeing which com ports show, and then
>unplug the cable, and see which one disappears, so you can select that
>port in Chirp.
> > > > HTH.
> > > >
> > > > Glenn
> > > >
> > > > ----- Original Message -----
> > > > From: Charles Gierke mailto:cgierke at cox.net
> > > > To: Discussion of CHIRP mailto:chirp_users at intrepid.danplanet.com
>; Silverfox mailto:alan.r.hill at gmail.com ; John LaMartina
>mailto:JohnLa at usa.net
> > > > Sent: Monday, August 24, 2020 7:43 PM
> > > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not
>communicating
> > > >
> > > > thanks for the suggestion. Unfortunately, no luck.
> > > >
> > > > Chuck
> > > >
> > > >
> > > > > > > > On August 23, 2020 at 4:26 PM Silverfox <
>alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com > wrote:
> > > > >
> > > > >
> > > > > I forgot that you are on Windows. The windows OS is very poor
>supporting USB. You might try going into the device manager and tell it
>to show hidden devices. Once that is done, look at the USB entries and
>delete all of them that are diminished icons. That is, they are lighter
>than the other icons.
> > > > >
> > > > > Good luck.
> > > > >
> > > > > Alan
> > > > >
> > > > >
> > > > > From: chirp_users-bounces at intrepid.danplanet.com
>mailto:chirp_users-bounces at intrepid.danplanet.com
>[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
>Charles Gierke
> > > > > Sent: Sunday, August 23, 2020 3:05 PM
> > > > > To: Discussion of CHIRP; John LaMartina
> > > > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not
>communicating
> > > > >
> > > > >
> > > > > hi, still no luck.
> > > > > I went to the web site and put a death-grip on the plug and
>held it in as far as it would go. I trimmed a hair of the edges of the
>plug to let it seat on the bottom.
> > > > >
> > > > > thanks for the suggestions
> > > > >
> > > > > <!--[endif]-->
> > > > >
> > > > > On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net>
>wrote:
> > > > >
> > > > > This may assist.
> > > > >
> > > > > Www.Miklor.com/COM/UV_ErrorMess.php
> > > > >
> > > > >
> > > > > John
> > > > >
> > > > > Www.Miklor.com/UV5R
> > > > >
> > > > >
> > > > >
> > > > > <!--[endif]-->
> > > > >
> > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net>
>wrote:
> > > > >
> > > > > > > > > >
> > > > > >
> > > > > > On Wednesday my 2 BaoFeng UV 5R radios could download and
>upload to CHIRP.
> > > > > >
> > > > > > On Friday all I got was the following message: Radio Did Not
>Respond.
> > > > > >
> > > > > > I tried reloading the latest version of CHIRP, no change. I
>tried an earlier version of CHIRP, no change. I reloaded the latest
>version back, no change. Visually the radio's red light blinks then the
>LED display blinks then the error message shows up on CHIRP.
> > > > > >
> > > > > >
> > > > > > Any suggestions?
> > > > > >
> > > > > > Thanks Chuck KJ7INT
> > > > > >
> > > > > > _______________________________________________
> > > > > > chirp_users mailing list
> > > > > > chirp_users at intrepid.danplanet.com
> > > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > > > This message was sent to John LaMartina at johnla at usa.net
> > > > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> > > > > >
> > > > > > > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > chirp_users mailing list
> > > > > chirp_users at intrepid.danplanet.com
> > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > > This message was sent to Chuck at cgierke at cox.net
> > > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > > >
> > > >
> > > > > > > > _______________________________________________
> > > > > chirp_users mailing list
> > > > > chirp_users at intrepid.danplanet.com
> > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > > This message was sent to Chuck at cgierke at cox.net
> > > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> > > > >
> > > > > > > >
> > > >
> > > >
> > > >
> > > > ---------------------------------------------
> > > >
> > > >
> > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > This message was sent to Glenn at glennervin at cableone.net
> > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> > > >
> > > > > >
> > >
> > > > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > This message was sent to Chuck at cgierke at cox.net
> > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> > > >
> > > > > > _______________________________________________ chirp_users
>mailing list
>chirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To
>unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> > >
> > > >
> >
> >
> > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
> > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net
>www http://www.ngunn.net
> >
> >
>
>
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Chuck at cgierke at cox.net
> > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> >
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/fccc6431/attachment-0001.html
>
>------------------------------
>
>Message: 23
>Date: Tue, 25 Aug 2020 11:27:16 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, "Peter
> J. McClosky" <pmcclosky at earthlink.net>
>Message-ID: <1182065798.252367.1598380036170 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>HI, I followed your advice and took it slow. I waited a minimum of 10
>seconds, I put a strangle hold on the plug and radio to insure the plug
>was fully into the socket. I double checked the USB plug was in the USB
>socket and it was connected to the Win 10 computer as COM 3.
>
>the radio is still not connecting to CHIRP. About 3 seconds after
>starting the download, the radio seems to shut itself off and restart.
>
>thanks for your time and help.
>Chuck
>
>
> > On August 24, 2020 at 6:09 PM "Peter J. McClosky"
><pmcclosky at earthlink.net> wrote:
> >
> > Hello,
> >
> > I have programed well over a hundred UV-5x radios and have had both
>easy and hard times programing them.
> >
> > One thing that I learned is to slow down, waiting about 10 seconds
>between actions taken on the computer. This solve most of the error
>problems.
> >
> > If that does not work, most of the rest to the time ,it is solved by
>pushing the programing cable into the radio and keep pressure on the
>cable until the pride is programed. I have to push it VERY hard.
> >
> > On a windows machines you have to select the right com port (I am
>mostly a mac person so I find the right port by trial and error).
> >
> > As an aside, using more that 60 cables to program the radios, I have
>only found one cable that was defective, so that is most likely, not
>the problem.
> > -----
> > Peter J. McClosky, N7IY
> > Eugene, Oregon
> > pmcclosky at earthlink.net mailto:pmcclosky at earthlink.net
> > n7iy at arrl.net
> > http://home.earthlink.net/~pmcclosky/
> >
> >
> > > > On Aug 24, 2020, at 5:43 PM, Charles Gierke < cgierke at cox.net
>mailto:cgierke at cox.net > wrote:
> > >
> > > thanks for the suggestion. Unfortunately, no luck.
> > >
> > > Chuck
> > >
> > >
> > > > > > On August 23, 2020 at 4:26 PM Silverfox <
>alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com > wrote:
> > > >
> > > > I forgot that you are on Windows. The windows OS is very poor
>supporting USB. You might try going into the device manager and tell it
>to show hidden devices. Once that is done, look at the USB entries and
>delete all of them that are diminished icons. That is, they are lighter
>than the other icons.
> > > > Good luck.
> > > > Alan
> > > >
> > > > From: chirp_users-bounces at intrepid.danplanet.com
>mailto:chirp_users-bounces at intrepid.danplanet.com
>[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
>Charles Gierke
> > > > Sent: Sunday, August 23, 2020 3:05 PM
> > > > To: Discussion of CHIRP; John LaMartina
> > > > Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not
>communicating
> > > >
> > > > hi, still no luck.
> > > > I went to the web site and put a death-grip on the plug and held
>it in as far as it would go. I trimmed a hair of the edges of the plug
>to let it seat on the bottom.
> > > >
> > > > thanks for the suggestions
> > > >
> > > >
> > > >
> > > > On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net
>mailto:JohnLa at usa.net > wrote:
> > > >
> > > > This may assist.
> > > >
>Www.Miklor.com/COM/UV_ErrorMess.phphttp://www.miklor.com/COM/UV_ErrorMess.php
> > > >
> > > > John
> > > > Www.Miklor.com/UV5Rhttp://www.miklor.com/UV5R
> > > >
> > > >
> > > >
> > > >
> > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net
>mailto:cgierke at cox.net > wrote:
> > > >
> > > > > > > > ?
> > > > >
> > > > > On Wednesday my 2 BaoFeng UV 5R radios could download and
>upload to CHIRP.
> > > > >
> > > > > On Friday all I got was the following message: Radio Did Not
>Respond.
> > > > >
> > > > > I tried reloading the latest version of CHIRP, no change. I
>tried an earlier version of CHIRP, no change. I reloaded the latest
>version back, no change. Visually the radio's red light blinks then the
>LED display blinks then the error message shows up on CHIRP.
> > > > >
> > > > >
> > > > >
> > > > > Any suggestions?
> > > > >
> > > > > Thanks Chuck KJ7INT
> > > > >
> > > > > _______________________________________________
> > > > > chirp_users mailing list
> > > > > chirp_users at intrepid.danplanet.com
>mailto:chirp_users at intrepid.danplanet.com
> > > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > > This message was sent to John LaMartina at johnla at usa.net
>mailto:johnla at usa.net
> > > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > > > >
> > > > > > > >
> > > >
> > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
>mailto:chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > This message was sent to Chuck at cgierke at cox.net
>mailto:cgierke at cox.net
> > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > > >
> > > >
> > > >
> > > > > >
> > >
> > > > > > _______________________________________________
> > > > chirp_users mailing list
> > > > chirp_users at intrepid.danplanet.com
>mailto:chirp_users at intrepid.danplanet.com
> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > > This message was sent to Chuck at cgierke at cox.net
>mailto:cgierke at cox.net
> > > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > > >
> > > > > > _______________________________________________
> > > chirp_users mailing list
> > > chirp_users at intrepid.danplanet.com
>mailto:chirp_users at intrepid.danplanet.com
> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > > This message was sent to Peter at pmcclosky at earthlink.net
>mailto:pmcclosky at earthlink.net
> > > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>mailto:chirp_users-unsubscribe at intrepid.danplanet.com
> > >
> > > >
> >
>
>
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Chuck at cgierke at cox.net
> > To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
> >
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/274f771b/attachment-0001.html
>
>------------------------------
>
>Message: 24
>Date: Tue, 25 Aug 2020 13:31:08 -0500
>From: "Glenn K0LNY" <glennervin at cableone.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
>Message-ID: <007901d67b0d$e6ebc250$7001a8c0 at NUCPPYH>
>Content-Type: text/plain; charset="utf-8"
>
>Hi Chuck,
>Could it be that your battery is the problem?
>Can you keep it in the charging cradle while doing the Chirp work?
>HTH.
>Glenn
>----- Original Message -----
>From: Charles Gierke
>To: Discussion of CHIRP ; Peter J. McClosky
>Sent: Tuesday, August 25, 2020 1:27 PM
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>
>
>HI, I followed your advice and took it slow. I waited a minimum of 10
>seconds, I put a strangle hold on the plug and radio to insure the plug
>was fully into the socket. I double checked the USB plug was in the USB
>socket and it was connected to the Win 10 computer as COM 3.
>
>the radio is still not connecting to CHIRP. About 3 seconds after
>starting the download, the radio seems to shut itself off and restart.
>
>thanks for your time and help.
>Chuck
>
>
>On August 24, 2020 at 6:09 PM "Peter J. McClosky"
><pmcclosky at earthlink.net> wrote:
>
>Hello,
>
>
>I have programed well over a hundred UV-5x radios and have had both
>easy and hard times programing them.
>
>
>One thing that I learned is to slow down, waiting about 10 seconds
>between actions taken on the computer. This solve most of the error
>problems.
>
>
>If that does not work, most of the rest to the time ,it is solved by
>pushing the programing cable into the radio and keep pressure on the
>cable until the pride is programed. I have to push it VERY hard.
>
>
>On a windows machines you have to select the right com port (I am
>mostly a mac person so I find the right port by trial and error).
>
>
>As an aside, using more that 60 cables to program the radios, I have
>only found one cable that was defective, so that is most likely, not
>the problem.
>
>-----
>Peter J. McClosky, N7IY
>Eugene, Oregon
>pmcclosky at earthlink.net
>n7iy at arrl.net
>http://home.earthlink.net/~pmcclosky/
>
>
>On Aug 24, 2020, at 5:43 PM, Charles Gierke < cgierke at cox.net> wrote:
>
>
>thanks for the suggestion. Unfortunately, no luck.
>
>Chuck
>
>
>On August 23, 2020 at 4:26 PM Silverfox < alan.r.hill at gmail.com> wrote:
>
>
>I forgot that you are on Windows. The windows OS is very poor
>supporting USB. You might try going into the device manager and tell it
>to show hidden devices. Once that is done, look at the USB entries and
>delete all of them that are diminished icons. That is, they are lighter
>than the other icons.
>Good luck.
>Alan
>
>
>From: chirp_users-bounces at intrepid.danplanet.com
>[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
>Charles Gierke
>Sent: Sunday, August 23, 2020 3:05 PM
>To: Discussion of CHIRP; John LaMartina
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>
>
>hi, still no luck.
>I went to the web site and put a death-grip on the plug and held it in
>as far as it would go. I trimmed a hair of the edges of the plug to let
>it seat on the bottom.
>
>thanks for the suggestions
>
>
>
><!--[endif]-->
>On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>
>This may assist.
>Www.Miklor.com/COM/UV_ErrorMess.php
>
>
>John
>Www.Miklor.com/UV5R
>
>
>
>
>
><!--[endif]-->
>On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>
>?
>On Wednesday my 2 BaoFeng UV 5R radios could download and upload to
>CHIRP.
>
>On Friday all I got was the following message: Radio Did Not Respond.
>
>I tried reloading the latest version of CHIRP, no change. I tried an
>earlier version of CHIRP, no change. I reloaded the latest version
>back, no change. Visually the radio's red light blinks then the LED
>display blinks then the error message shows up on CHIRP.
>
>
>
>Any suggestions?
>
>Thanks Chuck KJ7INT
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to John LaMartina at johnla at usa.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Chuck at cgierke at cox.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Chuck at cgierke at cox.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Peter at pmcclosky at earthlink.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Chuck at cgierke at cox.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>--------------------------------------------------------------------------------
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Glenn at glennervin at cableone.net
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
>http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200825/8aa2a1aa/attachment-0001.html
>
>------------------------------
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>To unsubscribe, send an email to
>chirp_users-unsubscribe at intrepid.danplanet.com
>
>End of chirp_users Digest, Vol 140, Issue 11
>********************************************
More information about the chirp_users
mailing list