[chirp_users] Chirp and BaoFeng UV 5R not communicating

[Glenn K0LNY]

Chuck,
Have you tried the following?
open device manager, and seeing which com ports show, and then unplug the cable, and see which one disappears, so you can select that port in Chirp.
HTH.

Glenn
 
----- Original Message ----- 
From: Charles Gierke 
To: Discussion of CHIRP ; Silverfox ; John LaMartina 
Sent: Monday, August 24, 2020 7:43 PM
Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating


thanks for the suggestion. Unfortunately, no luck. 

Chuck 


  On August 23, 2020 at 4:26 PM Silverfox <alan.r.hill at gmail.com> wrote: 


  I forgot that you are on Windows.  The windows OS is very poor supporting USB.  You might try going into the device manager and tell it to show hidden devices.  Once that is done, look at the USB entries and delete all of them that are diminished icons.  That is, they are lighter than the other icons.

  Good luck.

  Alan



  From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Charles Gierke
  Sent: Sunday, August 23, 2020 3:05 PM
  To: Discussion of CHIRP; John LaMartina
  Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating



  hi, still no luck. 
  I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom. 

  thanks for the suggestions 

  <!--[endif]--> 

  On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote: 

  This may assist. 

  Www.Miklor.com/COM/UV_ErrorMess.php  



  John 

  Www.Miklor.com/UV5R  




  <!--[endif]--> 

  On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote: 

     

    On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.  

    On Friday all I got was the following message:  Radio Did Not Respond.

    I tried reloading the latest version of CHIRP, no change.  I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change.  Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.



    Any suggestions?

    Thanks Chuck KJ7INT

    _______________________________________________ 
    chirp_users mailing list 
    chirp_users at intrepid.danplanet.com 
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
    This message was sent to John LaMartina at johnla at usa.net 
    To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 


    

  _______________________________________________ 
  chirp_users mailing list 
  chirp_users at intrepid.danplanet.com 
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
  This message was sent to Chuck at cgierke at cox.net 
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 


    


  
  _______________________________________________ 
  chirp_users mailing list 
  chirp_users at intrepid.danplanet.com 
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
  This message was sent to Chuck at cgierke at cox.net 
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 

  


--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/f5d7164f/attachment.html