[chirp_users] chirp_users Digest, Vol 140, Issue 10
Tommy Long
Mon Aug 24 13:02:06 PDT 2020
Do you ever think they will fix them to download radio reference ?
------ Original Message ------
From: chirp_users-request at intrepid.danplanet.com
To: chirp_users at intrepid.danplanet.com
Sent: 8/24/2020 2:00:02 PM
Subject: chirp_users Digest, Vol 140, Issue 10
>Send chirp_users mailing list submissions to
>chirp_users at intrepid.danplanet.com
>
>To subscribe or unsubscribe via the World Wide Web, visit
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>or, via email, send a message with subject or body 'help' to
>chirp_users-request at intrepid.danplanet.com
>
>You can reach the person managing the list at
>chirp_users-owner at intrepid.danplanet.com
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of chirp_users digest..."
>
>
>Today's Topics:
>
> 1. Re: transferring channels from one radio manuf.to another
> (Michael Rathbun)
> 2. Re: transferring channels from one radio manuf.to another
> (kn1ndn at gmail.com)
> 3. ICOM 5100 (Tim Fitch)
> 4. Re: Chirp and BaoFeng UV 5R not communicating (Brian Erickson)
> 5. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 6. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 7. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 8. Re: Chirp and BaoFeng UV 5R not communicating (Don Goodrich)
> 9. Re: Chirp and BaoFeng UV 5R not communicating (Charles Gierke)
> 10. Re: Chirp and BaoFeng UV 5R not communicating
> (Nigel A. Gunn G8IFF/W8IFF)
> 11. Re: Chirp and BaoFeng UV 5R not communicating (Silverfox)
> 12. Re: ICOM 5100 (Chuck Hast)
> 13. Re: ICOM 5100 (Jean C. Velez)
> 14. Re: ICOM 5100 (Chuck Hast)
> 15. Baofeng UV-9r plus cable issues (Jeremiah Williams)
> 16. Re: Baofeng UV-9r plus cable issues (Jardy)
> 17. Re: Baofeng UV-9r plus cable issues (W Paul Mills)
> 18. Re: Baofeng UV-9r plus cable issues (Jim Unroe)
> 19. Re: transferring channels from one radio manuf.to another
> (Jim Unroe)
> 20. Re: Baofeng UV-9r plus cable issues (richard ward)
> 21. Re: Baofeng UV-9r plus cable issues (Jeremiah Williams)
> 22. Re: Baofeng UV-9r plus cable issues (John La)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Sun, 23 Aug 2020 14:23:52 -0500
>From: Michael Rathbun <KL7F at kl7f.us>
>Subject: Re: [chirp_users] transferring channels from one radio
> manuf.to another
>To: "chirp_users at intrepid.danplanet.com"
> <chirp_users at intrepid.danplanet.com>
>Message-ID: <feg5kfda5kvbvuc859ts9dm53gqqof9chb at tesp.com>
>Content-Type: text/plain; charset=us-ascii
>
>On Sun, 23 Aug 2020 18:54:59 +0000 (UTC), robert moore via chirp_users
><chirp_users at intrepid.danplanet.com> wrote:
>
>>Hello all,I have been using chirp for a few years now to program my baofeng UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the channels and settings on my Baofeng are the exact same ones that i want to program in to my new Leixen. Is there a way to transfer the information from the Baofeng to the Leixen using chirp? thanks
>>Robert/ KM4ORN
>
>Conveying Baofeng UV-5 to an Icom IC-T7H was a matter of copy/paste, with
>the occasional conflict to be resolved because of different channel usages.
>
>mdr
>
>
>
>------------------------------
>
>Message: 2
>Date: Sun, 23 Aug 2020 12:25:45 -0700
>From: <kn1ndn at gmail.com>
>Subject: Re: [chirp_users] transferring channels from one radio
> manuf.to another
>To: "'robert moore'" <rm31859 at yahoo.com>, "'Discussion of CHIRP'"
> <chirp_users at intrepid.danplanet.com>
>Message-ID: <008a01d67983$339137c0$9ab3a740$@gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>Are you the same Robert Moore from ACFP?
>
>
>
>
>
>From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> On Behalf Of robert moore via chirp_users
>Sent: Sunday, August 23, 2020 11:55 AM
>To: chirp_users at intrepid.danplanet.com
>Subject: [chirp_users] transferring channels from one radio manuf.to another
>
>
>
>Hello all,
>
>I have been using chirp for a few years now to program my baofeng UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the channels and settings on my Baofeng are the exact same ones that i want to program in to my new Leixen. Is there a way to transfer the information from the Baofeng to the Leixen using chirp? thanks
>
>
>
>Robert/ KM4ORN
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/09033256/attachment-0001.html
>
>------------------------------
>
>Message: 3
>Date: Sun, 23 Aug 2020 19:32:34 +0000
>From: Tim Fitch <fivesam20 at msn.com>
>Subject: [chirp_users] ICOM 5100
>To: "chirp_users at intrepid.danplanet.com"
> <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <BY5PR17MB35055B7EC6C9A239B66083F2A4590 at BY5PR17MB3505.namprd17.prod.outlook.com>
>Content-Type: text/plain; charset="us-ascii"
>
>
>Will Icom 5100A ever be added to the list of supported radios to be programmed by CHIRP? Or is there a work around so that you can program it?
>
>Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1b830214/attachment-0001.html
>
>------------------------------
>
>Message: 4
>Date: Sun, 23 Aug 2020 14:58:03 -0600
>From: Brian Erickson <brian at dashley.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <6A7E1642-8534-4E85-B9BE-9E28386EEC77 at dashley.net>
>Content-Type: text/plain; charset="utf-8"
>
>I have the cable needed to be held into the radio really hard for it to work.
>
>Sent from my iPad
>
>> On Aug 23, 2020, at 12:32 PM, Charles Gierke <cgierke at cox.net> wrote:
>>
>> ? The cable has been working since August 2019. for over a year no problems. perhaps the warranty is up lol
>>
>>>>> On August 23, 2020 at 8:34 AM Jardy via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>>>>>
>>>>> Did you check Windows Device Manager to see if your cable shows to be a Prolific cable? If it is, try rolling your driver back to 3.2.0.0. Check www.miklor.com for info. Check under Drivers.
>>>>>
>>>>> Jardy Dawson WA7JRD
>>>>>
>>>>> Message sent by....Oh look!! Pretty lights!!
>>>>>
>>>>>
>>>>> On Aug 23, 2020, at 08:24, Gary A. Cox <garyacox at sbcglobal.net> wrote:
>>>>>
>>>>> ?Charles,
>>>>> I have never gotten my radios to sync either and Finely gave up.
>>>>> I even bought 2 cables thinking it was a cable I followed all the instructions just like you.
>>>>> If you succeed, please email me back
>>>>>
>>>>> Gary A Cox
>>>>> Sent from my iPhone
>>>>>
>>>>>> On Aug 22, 2020, at 4:12 PM, Alan Hill <alan.r.hill at gmail.com> wrote:
>>>>>>
>>>>>> ?
>>>>>> Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp. Also turn the volume up from minimum. Last resort run chirp as adminstrator.
>>>>>>
>>>>>>
>>>>>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke at cox.net> wrote:
>>>>>>> On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>>>>>>>
>>>>>>> On Friday all I got was the following message: Radio Did Not Respond.
>>>>>>>
>>>>>>> I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Any suggestions?
>>>>>>>
>>>>>>> Thanks Chuck KJ7INT
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> chirp_users mailing list
>>>>>>>chirp_users at intrepid.danplanet.com
>>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>>> This message was sent to Silver Fox at alan.r.hill at gmail.com
>>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>>chirp_users at intrepid.danplanet.com
>>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> This message was sent to Gary at garyacox at sbcglobal.net
>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>>chirp_users at intrepid.danplanet.com
>>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Jardy at jardy72 at yahoo.com
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Chuck at cgierke at cox.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Brian at brian at dashley.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/a3522361/attachment-0001.html
>
>------------------------------
>
>Message: 5
>Date: Sun, 23 Aug 2020 14:47:57 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Jim
> Unroe <rock.unroe at gmail.com>
>Message-ID: <1998916226.214486.1598219277396 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>no luck yet.
>I tried pressure straight into the radio, to the back side of the radio, to the front side of the radio, to the top of the radio and to the bottom of the radio.
>similar results, the LCD screen blinks and goes back to the beginning screen.
>
>thanks again for the suggestion
>
>> On August 22, 2020 at 3:50 PM Jim Unroe < rock.unroe at gmail.com mailto:rock.unroe at gmail.com > wrote:
>>
>>
>> On Sat, Aug 22, 2020 at 6:46 PM Charles Gierke < cgierke at cox.net mailto:cgierke at cox.net > wrote:
>> >
>>
>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> >
>> > >
>> > > On Friday all I got was the following message: Radio Did Not Respond.
>> >
>> > >
>> > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> >
>> > > >
>>
>> > > Any suggestions?
>> >
>> > >
>> > > Thanks Chuck KJ7INT
>> >
>> > > Hi Chuck,
>>
>> You will get the exact same error message if you don't plug the 2-pin
>> plug into the radio. So make sure that the 2-pin plug is fully
>> inserted into the socket of the radio. Some have had to put a little
>> pressure on the plug during the cloning process.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net mailto:cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f8e9fc25/attachment-0001.html
>
>------------------------------
>
>Message: 6
>Date: Sun, 23 Aug 2020 14:55:01 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, Alan
> Hill <alan.r.hill at gmail.com>
>Message-ID: <1955657603.214592.1598219701014 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>NO luck yet. I held the plug in as far as it would go, no change. I turned the volume up all the way, no luck. I closed CHIRP and re-opened as Administrator,still no luck up or downloading.
>
>thanks for your assistance
>
>
>> On August 22, 2020 at 4:11 PM Alan Hill <alan.r.hill at gmail.com> wrote:
>>
>> Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp. Also turn the volume up from minimum. Last resort run chirp as adminstrator.
>>
>>
>> On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke at cox.net mailto:cgierke at cox.net > wrote:
>>
>> > >
>> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> >
>> > On Friday all I got was the following message: Radio Did Not Respond.
>> >
>> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> >
>> >
>> > Any suggestions?
>> >
>> > Thanks Chuck KJ7INT
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Silver Fox at alan.r.hill at gmail.com mailto:alan.r.hill at gmail.com
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com mailto:chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > > _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/65594809/attachment-0001.html
>
>------------------------------
>
>Message: 7
>Date: Sun, 23 Aug 2020 15:04:59 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, John
> LaMartina <JohnLa at usa.net>
>Message-ID: <418604032.214670.1598220299987 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>hi, still no luck.
>I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>
>thanks for the suggestions
>
>
>> On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>>
>> This may assist.
>>Www.Miklor.com/COM/UV_ErrorMess.php
>>
>> John
>>Www.Miklor.com/UV5R
>>
>>
>>
>> > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>> >
>> >
>> > >
>> > > ?
>> >
>> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> >
>> > On Friday all I got was the following message: Radio Did Not Respond.
>> >
>> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> >
>> >
>> > Any suggestions?
>> >
>> > Thanks Chuck KJ7INT
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to John LaMartina at johnla at usa.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > >
>
>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/1822ebfe/attachment-0001.html
>
>------------------------------
>
>Message: 8
>Date: Mon, 24 Aug 2020 00:08:56 +0200
>From: Don Goodrich <don.goodrich at cheerful.com>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: chirp_users at intrepid.danplanet.com
>Message-ID:
> <trinity-c73ec6b2-1e51-44c1-b303-6c1692159291-1598220536913 at 3c-app-mailcom-lxa13>
>Content-Type: text/plain; charset="us-ascii"
>
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/d79dd822/attachment-0001.html
>
>------------------------------
>
>Message: 9
>Date: Sun, 23 Aug 2020 15:13:49 -0700 (MST)
>From: Charles Gierke <cgierke at cox.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>, R G
> <mettle777 at outlook.com>
>Message-ID: <734118452.214824.1598220829099 at myemail.cox.net>
>Content-Type: text/plain; charset="utf-8"
>
>hi, no luck. I tried disconnecting the cable and re-inserting the cable. no luck, the problem is occurring between 3 and 4 seconds into the program.
>
>thanks for the suggestion
>
>
>> On August 22, 2020 at 7:10 PM R G <mettle777 at outlook.com> wrote:
>>
>>
>> Hi;
>>
>> I?m new, however this happened to me several times. I found that if I disconnected the cable and started everything from START, it solved my problem every time...Hope this helps...Like I said I am NEW to this. ;}
>>
>> Regards
>>
>> Ron
>>
>>
>>
>> Sent from Mail https://go.microsoft.com/fwlink/?LinkId=550986 for Windows 10
>>
>>
>>
>> From: John LaMartina mailto:JohnLa at usa.net
>> Sent: August 22, 2020 8:56 PM
>> To: Discussion of CHIRP mailto:chirp_users at intrepid.danplanet.com
>> Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>>
>>
>>
>> This may assist.
>>
>>Www.Miklor.com/COM/UV_ErrorMess.php
>>
>>
>>
>> John
>>
>>Www.Miklor.com/UV5R
>>
>>
>>
>>
>>
>> > >
>> > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>> >
>> > >
>> > >
>> > ?
>> >
>> > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> >
>> > On Friday all I got was the following message: Radio Did Not Respond.
>> >
>> > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> >
>> >
>> >
>> > Any suggestions?
>> >
>> > Thanks Chuck KJ7INT
>> >
>> > >
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to John LaMartina at johnla at usa.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>
>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck at cgierke at cox.net
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/f219174f/attachment-0001.html
>
>------------------------------
>
>Message: 10
>Date: Sun, 23 Aug 2020 18:29:37 -0400 (EDT)
>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel at ngunn.net>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <536516552.1973718.1598221777528 at email.ionos.com>
>Content-Type: text/plain; charset="utf-8"
>
>Might help if we knew where you were located.
>
>
>> On 23 August 2020 at 18:04 Charles Gierke <cgierke at cox.net> wrote:
>>
>> hi, still no luck.
>> I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>>
>> thanks for the suggestions
>>
>>
>> > > On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>> >
>> > This may assist.
>> > Www.Miklor.com/COM/UV_ErrorMess.php
>> >
>> > John
>> > Www.Miklor.com/UV5R
>> >
>> >
>> >
>> > > > > On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>> > >
>> > >
>> > > > >
>> > > > >
>> > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>> > >
>> > > On Friday all I got was the following message: Radio Did Not Respond.
>> > >
>> > > I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>> > >
>> > >
>> > > Any suggestions?
>> > >
>> > > Thanks Chuck KJ7INT
>> > >
>> > > _______________________________________________
>> > > chirp_users mailing list
>> > > chirp_users at intrepid.danplanet.com
>> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > > This message was sent to John LaMartina at johnla at usa.net
>> > > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> > >
>> > > > >
>> > >
>>
>> > > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Chuck at cgierke at cox.net
>> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>> > > _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
>
>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/74fe899a/attachment-0001.html
>
>------------------------------
>
>Message: 11
>Date: Sun, 23 Aug 2020 16:26:04 -0700
>From: "Silverfox" <alan.r.hill at gmail.com>
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>,
> "'John LaMartina'" <JohnLa at usa.net>
>Message-ID: <5f42fb0c.1c69fb81.df118.0278 at mx.google.com>
>Content-Type: text/plain; charset="utf-8"
>
>I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons.
>Good luck.
>Alan
>
>From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Charles Gierke
>Sent: Sunday, August 23, 2020 3:05 PM
>To: Discussion of CHIRP; John LaMartina
>Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating
>
>hi, still no luck.
>I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom.
>
>thanks for the suggestions
>
>
>
>On August 22, 2020 at 5:55 PM John LaMartina <JohnLa at usa.net> wrote:
>This may assist.
>Www.Miklor.com/COM/UV_ErrorMess.php
>
>John
>Www.Miklor.com/UV5R
>
>
>
>
>On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke at cox.net> wrote:
>?
>On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP.
>On Friday all I got was the following message: Radio Did Not Respond.
>I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.
>
>Any suggestions?
>Thanks Chuck KJ7INT
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to John LaMartina at johnla at usa.net
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to Chuck at cgierke at cox.net
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5c54a1a5/attachment-0001.html
>
>------------------------------
>
>Message: 12
>Date: Sun, 23 Aug 2020 19:03:11 -0500
>From: Chuck Hast <kp4djt at gmail.com>
>Subject: Re: [chirp_users] ICOM 5100
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAN9xdP_vnndYFcyCzW-bGb=PS1JHdAwn8JQ5x0WyJ=O1=6J=DA at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>I have asked the same question, I have even offered the use of my radio to
>test it, sure
>would be nice to get the 5100A in under Chirp.
>
>
>On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <fivesam20 at msn.com> wrote:
>
>>
>>
>> Will Icom 5100A ever be added to the list of supported radios to be
>> programmed by CHIRP? Or is there a work around so that you can program it?
>>
>>
>>
>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
>> Windows 10
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck Hast at kp4djt at gmail.com
>> To unsubscribe, send an email to
>>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>--
>Chirp + Editcp + MD380Tools on Linux
>Celestial!!!
>Chuck -- KP4DJT
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/c0ebb95b/attachment-0001.html
>
>------------------------------
>
>Message: 13
>Date: Sun, 23 Aug 2020 21:01:57 -0400
>From: "Jean C. Velez" <jeanvelez69 at gmail.com>
>Subject: Re: [chirp_users] ICOM 5100
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAB__4Zv=m8o7e=3GL7XekqsrdjejHkU3pRuNwnveLYA30mdgSA at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>What about for ID4100a?
>
>On Sun, Aug 23, 2020 at 20:03 Chuck Hast <kp4djt at gmail.com> wrote:
>
>> I have asked the same question, I have even offered the use of my radio to
>> test it, sure
>> would be nice to get the 5100A in under Chirp.
>>
>>
>> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <fivesam20 at msn.com> wrote:
>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Will Icom 5100A ever be added to the list of supported radios to be
>>> programmed by CHIRP? Or is there a work around so that you can program it?
>>>
>>>
>>>
>>>
>>>
>>> Sent from
>>>
>>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>>
>>> chirp_users mailing list
>>>
>>>
>>>chirp_users at intrepid.danplanet.com
>>>
>>>
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>>
>>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>>
>>>
>>> To unsubscribe, send an email to
>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>>
>> --
>> Chirp + Editcp + MD380Tools on Linux
>> Celestial!!!
>> Chuck -- KP4DJT
>>
>>
>> _______________________________________________
>>
>> chirp_users mailing list
>>
>>chirp_users at intrepid.danplanet.com
>>
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>> This message was sent to JEAN VELEZ at jeanvelez69 at gmail.com
>>
>> To unsubscribe, send an email to
>>chirp_users-unsubscribe at intrepid.danplanet.com
>
>--
>null
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/5db1d60c/attachment-0001.html
>
>------------------------------
>
>Message: 14
>Date: Sun, 23 Aug 2020 20:48:29 -0500
>From: Chuck Hast <kp4djt at gmail.com>
>Subject: Re: [chirp_users] ICOM 5100
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CAN9xdP96P7tCSfEzA3QubSxKUmn8HMGHuNZ2Kr4U+xRGjLn23A at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>I would almost bet that we get the 5100a running the 4100a might
>come in on the same ticket, radio appears to be a subset of the
>5100a.
>
>On Sun, Aug 23, 2020 at 8:03 PM Jean C. Velez <jeanvelez69 at gmail.com> wrote:
>
>> What about for ID4100a?
>>
>> On Sun, Aug 23, 2020 at 20:03 Chuck Hast <kp4djt at gmail.com> wrote:
>>
>>> I have asked the same question, I have even offered the use of my radio
>>> to test it, sure
>>> would be nice to get the 5100A in under Chirp.
>>>
>>>
>>> On Sun, Aug 23, 2020 at 2:33 PM Tim Fitch <fivesam20 at msn.com> wrote:
>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Will Icom 5100A ever be added to the list of supported radios to be
>>>> programmed by CHIRP? Or is there a work around so that you can program it?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sent from
>>>>
>>>> Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>>
>>>> chirp_users mailing list
>>>>
>>>>
>>>>chirp_users at intrepid.danplanet.com
>>>>
>>>>
>>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>
>>>>
>>>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>>>
>>>>
>>>> To unsubscribe, send an email to
>>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>>
>>>
>>> --
>>> Chirp + Editcp + MD380Tools on Linux
>>> Celestial!!!
>>> Chuck -- KP4DJT
>>>
>>>
>>> _______________________________________________
>>>
>>> chirp_users mailing list
>>>
>>>chirp_users at intrepid.danplanet.com
>>>
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>> This message was sent to JEAN VELEZ at jeanvelez69 at gmail.com
>>>
>>> To unsubscribe, send an email to
>>>chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> --
>> null
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Chuck Hast at kp4djt at gmail.com
>> To unsubscribe, send an email to
>>chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>--
>Chirp + Editcp + MD380Tools on Linux
>Celestial!!!
>Chuck -- KP4DJT
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/2d94dd5e/attachment-0001.html
>
>------------------------------
>
>Message: 15
>Date: Sun, 23 Aug 2020 21:15:32 -0700
>From: Jeremiah Williams <jjherrera79 at yahoo.com>
>Subject: [chirp_users] Baofeng UV-9r plus cable issues
>To: chirp_users at intrepid.danplanet.com
>Message-ID: <AA902D85-EDAF-4DD9-BD6E-49A22334F3E7 at yahoo.com>
>Content-Type: text/plain; charset=utf-8
>
>My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>I?ve already tried all the things google info has. Download prolific etc...
>
>Jeremiah W.
>
>
>------------------------------
>
>Message: 16
>Date: Sun, 23 Aug 2020 22:02:18 -0700
>From: Jardy <jardy72 at yahoo.com>
>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>To: Jeremiah Williams <jjherrera79 at yahoo.com>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
>Message-ID: <15147F2F-2FD1-4A77-B6A5-97B8DFBE89C6 at yahoo.com>
>Content-Type: text/plain; charset="utf-8"
>
>Make sure you try to download from the radio before you write to the radio.
>
>Jardy Dawson WA7JRD
>
>Message sent by....Oh look!! Pretty lights!!
>
>
>> On Aug 23, 2020, at 21:16, Jeremiah Williams via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>>
>> ?My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>> I?ve already tried all the things google info has. Download prolific etc...
>>
>> Jeremiah W.
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jardy at jardy72 at yahoo.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200823/baa0da3c/attachment-0001.html
>
>------------------------------
>
>Message: 17
>Date: Mon, 24 Aug 2020 00:41:13 -0500
>From: W Paul Mills <ac0hy at wpmills.com>
>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>To: Jeremiah Williams via chirp_users
> <chirp_users at intrepid.danplanet.com>
>Message-ID: <a1a17343-d2fd-1009-a6f8-1e91ccb9ca14 at wpmills.com>
>Content-Type: text/plain; charset=utf-8; format=flowed
>
>Prolific driver is _NOT_ for use with a CH340 chip.
>
>Are you sure you are using the right COM port. What operating system are
>you using? What is the exact error?
>
>On 8/23/20 11:15 PM, Jeremiah Williams via chirp_users wrote:
>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>> I?ve already tried all the things google info has. Download prolific etc...
>>
>> Jeremiah W.
>> _______________________________________________
>> chirp_users mailing list
>>chirp_users at intrepid.danplanet.com
>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Paul AC0HY at ac0hy at wpmills.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>--
>/**************************************************
>* Amateur Radio Station AC0HY *
>* W. Paul Mills SN807 *
>* Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
>* President Kaw Valley Amateur Radio Club *
>**************************************************/
>
>
>
>------------------------------
>
>Message: 18
>Date: Mon, 24 Aug 2020 07:05:47 -0400
>From: Jim Unroe <rock.unroe at gmail.com>
>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>To: Jeremiah Williams <jjherrera79 at yahoo.com>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CADnO8U7rG53c7-eVo1Wpc9=sjHHuH+qCb6oyRLRT9BJyBEpRiQ at mail.gmail.com>
>Content-Type: text/plain; charset="UTF-8"
>
>On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
><chirp_users at intrepid.danplanet.com> wrote:
>>
>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>> I?ve already tried all the things google info has. Download prolific etc...
>>
>> Jeremiah W.
>
>What is the exact error (or better yet, attach a debug.log file)?
>
>Jim KC9HI
>
>
>------------------------------
>
>Message: 19
>Date: Mon, 24 Aug 2020 07:52:47 -0400
>From: Jim Unroe <rock.unroe at gmail.com>
>Subject: Re: [chirp_users] transferring channels from one radio
> manuf.to another
>To: robert moore <rm31859 at yahoo.com>, Discussion of CHIRP
> <chirp_users at intrepid.danplanet.com>
>Message-ID:
> <CADnO8U7vS_vYAOnES3zMjHgQb1qd1yTD4BSKtUYSFfG1A+VJ1w at mail.gmail.com>
>Content-Type: text/plain; charset="UTF-8"
>
>On Sun, Aug 23, 2020 at 2:56 PM robert moore via chirp_users
><chirp_users at intrepid.danplanet.com> wrote:
>>
>> Hello all,
>> I have been using chirp for a few years now to program my baofeng UV-5R handhelds.I have just picked up a new Leixen VV-898. All of the channels and settings on my Baofeng are the exact same ones that i want to program in to my new Leixen. Is there a way to transfer the information from the Baofeng to the Leixen using chirp? thanks
>>
>> Robert/ KM4ORN
>
>Robert,
>
>The first thing you need to do is to make sure CHIRP can even program
>your VV-898. Leixen has changed the radio since the original CHIRP
>support was created and may have broken it (according to some open
>issues).
>
>If CHIRP does program your VV-898 OK, then all you need to do is
>import a saved CHIRP Radio Images (*.img) file from your UV-5R into a
>tab from your VV-898. I use a UV-5R image as the master from
>programming all of my CHIRP supported dual-band radios. A more
>detailed explanation can be found here.
>
>https://baofengtech.com/CHIRPImport
>
>Jim KC9HI
>
>
>------------------------------
>
>Message: 20
>Date: Mon, 24 Aug 2020 12:04:32 +0000 (UTC)
>From: richard ward <bonsai_man_uk at yahoo.co.uk>
>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <1611222254.7842485.1598270672351 at mail.yahoo.com>
>Content-Type: text/plain; charset="utf-8"
>
> Yes you do have to upload whats already in the Radio even if youve set it to default to clear all IE the chinese channels? you can start a fresh page before your download withinin chirp? the download button will be available i/e more lit up when youve done that then cilck on the channels you want to download good luck
> On Monday, 24 August 2020, 12:08:49 BST, Jim Unroe <rock.unroe at gmail.com> wrote:
>
> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
><chirp_users at intrepid.danplanet.com> wrote:
>>
>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>> I?ve already tried all the things google info has. Download prolific etc...
>>
>> Jeremiah W.
>
>What is the exact error (or better yet, attach a debug.log file)?
>
>Jim KC9HI
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to rich at bonsai_man_uk at yahoo.co.uk
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200824/f98e36be/attachment-0001.html
>
>------------------------------
>
>Message: 21
>Date: Mon, 24 Aug 2020 06:03:54 -0700
>From: Jeremiah Williams <jjherrera79 at yahoo.com>
>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>To: Jim Unroe <rock.unroe at gmail.com>
>Cc: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>Message-ID: <B942FE98-C427-4FED-891E-DC488C6B3B7F at yahoo.com>
>Content-Type: text/plain; charset=utf-8
>
>Thank you all for your help. The message error says ?radio did not respond ?, but my radio light turn on and it starts to talk.
>
>
>Jeremiah W.
>
>> On Aug 24, 2020, at 4:05 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
>> <chirp_users at intrepid.danplanet.com> wrote:
>>>
>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>> I?ve already tried all the things google info has. Download prolific etc...
>>>
>>> Jeremiah W.
>>
>> What is the exact error (or better yet, attach a debug.log file)?
>>
>> Jim KC9HI
>
>
>
>------------------------------
>
>Message: 22
>Date: Mon, 24 Aug 2020 13:26:33 -0400
>From: "John La" <JohnLa at usa.net>
>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>To: "'Jeremiah Williams'" <jjherrera79 at yahoo.com>, "'Discussion of
> CHIRP'" <chirp_users at intrepid.danplanet.com>
>Message-ID: <039e01d67a3b$b6f61cd0$24e25670$@usa.net>
>Content-Type: text/plain; charset="UTF-8"
>
>Here is a list of Common Error Messages
>
>www.Miklor.com/COM/UV_ErrorMess.php
>
>Stay safe and Stay healthy.
>John K3NXU
>
>
>-----Original Message-----
>From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jeremiah Williams via chirp_users
>Sent: Monday, August 24, 2020 9:04 AM
>To: Jim Unroe
>Cc: Discussion of CHIRP
>Subject: Re: [chirp_users] Baofeng UV-9r plus cable issues
>
>Thank you all for your help. The message error says ?radio did not respond ?, but my radio light turn on and it starts to talk.
>
>
>Jeremiah W.
>
>> On Aug 24, 2020, at 4:05 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>
>> On Mon, Aug 24, 2020 at 12:17 AM Jeremiah Williams via chirp_users
>> <chirp_users at intrepid.danplanet.com> wrote:
>>>
>>> My Baofeng cable is a ch340. I says error when I try to upload my radio. Any suggestions? Or do I need a different cable?
>>> I?ve already tried all the things google info has. Download prolific etc...
>>>
>>> Jeremiah W.
>>
>> What is the exact error (or better yet, attach a debug.log file)?
>>
>> Jim KC9HI
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to John LaMartina at johnla at usa.net
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>------------------------------
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>End of chirp_users Digest, Vol 140, Issue 10
>********************************************
More information about the chirp_users
mailing list