[chirp_users] Import/Export and CROSS

[Jim Unroe]

On Tue, Apr 28, 2020 at 5:10 PM Don Goodrich <don.goodrich at cheerful.com> wrote:
>
> I have an entry in a Chirp Image that uses DCS in a particular memory location addressing a repeater.  The DCS code for transmit and receive are different so the Tone mode is CROSS  DTCS->DTCS.  When I export to a CSV file, the Receive code is not shown in the CSV file and when I attempt to import using this file the Tone mode in the entry comes back as TSQL rather than CROSS and only the transmit DCS code is shown, no receive code.  What am I doing wrong?
>
> Don

Hi Don,

You are not doing anything wrong. CSV files only support a single
DtcsCode. They also don't have a column to support Cross Mode
settings.

So instead save it as a native CHIRP Radio Images (*.ing) file to
retain the asymmetrical Dtcs codes.

Jim KC9HI