[chirp_users] Bug 1113 Icom 2100H error reported

Fri Apr 17 15:33:02 PDT 2020

You look in /dev/ and see what's listed.

> On 17 April 2020 at 18:22 Roger Hill <rhill at hillconsult.com> wrote:
> 
> 
> Peter
> 
> By any chance do you have two (or more) USB serial devices plugged in? I 
> am no Chirp expert, but I wonder if you should be using say ttyUSB1 or 
> something other than zero.
> 
> Hope this helps
> Roger
> G3YTN
> 
> ---
> ***************************
> Roger Hill
> ***************************
> 
> On 2020-04-17 18:14, Peter via chirp_users wrote:
> > Re Bug # 1113
> > 
> > I too have an Icom 2100H 2m transceiver and I also get the message
> > "Unexpected response from radio" when I try to upload/download from the
> > radio. This is under Linux Mint with the most recent version of Chirp.
> > 
> > I set the environment variable  DEBUG=30, try Chirp and get the error.
> > 
> > The laptop is dual boot, Linux Mint and Windows7.
> > 
> > Last lines of debug.log when Chirp (Linux Mint)was tried to 'detect' 
> > radio:
> > ...
> > [2020-04-17 13:23:02,391] chirp.ui.reporting - DEBUG: Server reports
> > version daily-20200409 is latest
> > [2020-04-17 13:23:51,102] chirp.ui.reporting - DEBUG: Reporting 
> > exception
> > [2020-04-17 13:23:51,103] chirp.ui.inputdialog - ERROR: --- Exception
> > Dialog: 'Serial' object has no attribute 'get_payload' ---
> > [2020-04-17 13:23:51,105] chirp.ui.inputdialog - ERROR: Traceback (most
> > recent call last):
> >    File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 175,
> > in run
> >      cs.radio_class = detect.DETECT_FUNCTIONS[vendor](cs.port)
> >    File "/usr/lib/python2.7/dist-packages/chirp/detect.py", line 76, in
> > detect_icom_radio
> >      result = _detect_icom_radio(ser)
> >    File "/usr/lib/python2.7/dist-packages/chirp/detect.py", line 43, in
> > _detect_icom_radio
> >      md = icf.get_model_data(ser)
> >    File "/usr/lib/python2.7/dist-packages/chirp/drivers/icf.py", line
> > 140, in get_model_data
> >      send_clone_frame(radio, 0xe0, mdata, raw=True)
> >    File "/usr/lib/python2.7/dist-packages/chirp/drivers/icf.py", line
> > 174, in send_clone_frame
> >      payload = radio.get_payload(data, raw, checksum)
> > AttributeError: 'Serial' object has no attribute 'get_payload'
> > 
> > [2020-04-17 13:23:51,107] chirp.ui.inputdialog - ERROR:
> > ----------------------------
> > 
> > 
> > So then I retry, putting in the values  for the port ttyUSB0, choose 
> > the
> > vendor as Icom and model  2100 and when I click clone from radio, I get
> > this error report:
> > 
> > last lines of debug file
> > [2020-04-17 13:27:51,235] chirp.ui.mainapp - INFO: Skipping existing
> > stock config
> > [2020-04-17 13:27:51,238] chirp.ui.reporting - DEBUG: Checking for 
> > updates
> > [2020-04-17 13:27:51,483] chirp.ui.reporting - DEBUG: Server reports
> > version daily-20200409 is latest
> > [2020-04-17 13:28:02,317] chirp.ui.mainapp - DEBUG: User selected Icom
> > IC-2100H on port /dev/ttyUSB0
> > [2020-04-17 13:28:02,324] chirp.ui.clone - DEBUG: Clone thread started
> > [2020-04-17 13:28:02,578] chirp.ui.reporting - DEBUG: Reporting 
> > exception
> > [2020-04-17 13:28:02,579] chirp.ui.common - ERROR: -- Exception: --
> > [2020-04-17 13:28:02,581] chirp.ui.common - ERROR: Traceback (most
> > recent call last):
> >    File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 256,
> > in run
> >      self.__radio.sync_in()
> >    File "/usr/lib/python2.7/dist-packages/chirp/drivers/icf.py", line
> > 657, in sync_in
> >      self._mmap = clone_from_radio(self)
> >    File "/usr/lib/python2.7/dist-packages/chirp/drivers/icf.py", line
> > 318, in clone_from_radio
> >      raise errors.RadioError("Failed to communicate with the radio: %s" 
> > % e)
> > RadioError: Failed to communicate with the radio: Unexpected response
> > from radio
> > 
> > [2020-04-17 13:28:02,581] chirp.ui.common - ERROR: ----------------
> > [2020-04-17 13:28:02,581] chirp.ui.clone - ERROR: Clone failed: Failed
> > to communicate with the radio: Unexpected response from radio
> > [2020-04-17 13:28:02,587] chirp.ui.clone - DEBUG: Clone thread ended
> > [2020-04-17 13:28:02,598] chirp.ui.reporting - DEBUG: Reporting model
> > usage: Icom_IC-2100H,download,True
> > [2020-04-17 13:28:02,612] chirp.ui.inputdialog - ERROR: --- Exception
> > Dialog: Failed to communicate with the radio: Unexpected response from
> > radio ---
> > [2020-04-17 13:28:02,613] chirp.ui.inputdialog - ERROR: None
> > 
> > [2020-04-17 13:28:02,614] chirp.ui.inputdialog - ERROR:
> > ----------------------------
> > [2020-04-17 13:28:02,614] chirp.ui.reporting - DEBUG: Reporting 
> > exception
> > 
> > 
> > So, then I reboot into Windows7, no change in cable or usb port, and it
> > all works!
> > 
> > I prefer to work in Linux so any suggestions would be welcome!
> > 
> > Peter, VE3BBN
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions   tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net