[chirp_users] Fwd: Re: Leixen VV-898S

Tom Henderson Tom at Henderson4.us
Wed Sep 18 19:22:29 PDT 2019


Oops, meant to reply to the list...



-------- Forwarded Message --------
Subject: 	Re: [chirp_users] Leixen VV-898S
Date: 	Wed, 18 Sep 2019 20:54:58 -0500
From: 	Tom Henderson <Tom at Henderson4.us>
To: 	Nigel A. Gunn G8IFF/W8IFF <nigel at ngunn.net>



Try downloading it as a Jetstream 270mh. I discovered that the A and B 
bakc were preserved when I downloaded with that profile rather than the 
Leixen.

Tom Henderson

On 9/18/19 8:45 PM, Nigel A. Gunn G8IFF/W8IFF wrote:
>
> If you're going to import from another radio, import the .img file and 
> not a .csv file.
>
>> On 18 September 2019 at 19:59 Dennis Wage <dwage at dwage.com> wrote:
>>
>> Don't import files from a different radio. They might import but 
>> might be the wrong format. I am thinking about the sorting thing 
>> could be as simple as 01 instead 1 or 001. With radio software like 
>> Chirp and especially Chirp, because it works with so  many different 
>> radios, the formats of everything needs to be EXACT!!
>>
>> Reset your radio to factory defaults. I always then program one 
>> frequency manually so that when I download from the radio to Chirp I 
>> can see the format the data is in.
>>
>> Download the now defaulted radio to a file. Edit this file to upload 
>> back to the radio.
>>
>> Dennis M. Wage (W9BOQ)
>>
>> 245 Corum Hill Road
>> Castalian Springs, TN 37031
>> (615) 310-4242  Cell
>> (615) 562-5128 Home
>> http://hammondb3organ.net <http://hammondb3organ.net/>
>> http://overdubs.net
>>
>>
>> On Wed, Sep 18, 2019 at 6:40 PM Dave C < cavanadd at gmail.com 
>> <mailto:cavanadd at gmail.com>> wrote:
>>
>>     I just received the above radio and am having a bit of trouble
>>     with the
>>     way CHIRP (or the radio) is handling the channels after programming.
>>     The radio seems to work fine, the programming cable connected
>>     right away
>>     without any driver drama, and the factory software even loaded up
>>     and
>>     will upload and download to and from the radio, but it's otherwise
>>     mostly useless**.  Chirp seems to work fine as well as far as
>>     reading
>>     and writing to the radio, and I was able to import UV-5R files
>>     without
>>     any problem.  The problem I'm having is the order of the channels is
>>     scrambled when uploading or downloading.  I THINK it has
>>     something to do
>>     with the separate A and B memory banks.  I made sure I selected
>>     the "A"
>>     bank on the Settings screen,  but it still seems to scramble the
>>     channels.  Earlier today I manually entered twelve local
>>     repeaters and
>>     numbered them channels 1 through 12, all in Bank A, but when I
>>     downloaded the radio to CHIRP, the #1 channel was now #4. I also
>>     deliberately didn't give any of the manually entered channels
>>     names, but
>>     there were channels with names scattered in with the other unnamed
>>     channels, apparently from Bank B.
>>
>>     If anyone has any ideas I'd like to hear them.
>>
>>     ** The factory software has two separate screens for Bank A and
>>     B, and
>>     seems to work fine moving files to and from the radio. The
>>     problem is I
>>     can't see any way to enter repeater offset frequencies or -/+
>>     values;
>>     apparently it's necessary to calculate and enter offsets manually.
>>
>>     thanks
>>     Dave
>>     _______________________________________________
>>     chirp_users mailing list
>>     chirp_users at intrepid.danplanet.com
>>     <mailto:chirp_users at intrepid.danplanet.com>
>>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>     This message was sent to Dennis Wage at dwage at dwage.com
>>     <mailto:dwage at dwage.com>
>>     To unsubscribe, send an email to
>>     chirp_users-unsubscribe at intrepid.danplanet.com
>>     <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>> To unsubscribe, send an email to 
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 
> 937 825 5032
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www 
> http://www.ngunn.net
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom KM4UQB attom at henderson4.us
> To unsubscribe, send an email tochirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190918/711232e8/attachment-0002.html 


More information about the chirp_users mailing list