[chirp_users] Leixen VV-898S

Dennis Wage dwage at dwage.com
Wed Sep 18 16:59:15 PDT 2019


Don't import files from a different radio. They might import but might be
the wrong format. I am thinking about the sorting thing could be as simple
as 01 instead 1 or 001. With radio software like Chirp and especially
Chirp, because it works with so  many different radios, the formats of
everything needs to be EXACT!!

Reset your radio to factory defaults. I always then program one frequency
manually so that when I download from the radio to Chirp I can see the
format the data is in.

Download the now defaulted radio to a file. Edit this file to upload back
to the radio.

Dennis M. Wage (W9BOQ)

245 Corum Hill Road
Castalian Springs, TN 37031
(615) 310-4242 Cell
(615) 562-5128 Home
http://hammondb3organ.net
http://overdubs.net


On Wed, Sep 18, 2019 at 6:40 PM Dave C <cavanadd at gmail.com> wrote:

> I just received the above radio and am having a bit of trouble with the
> way CHIRP (or the radio) is handling the channels after programming.
> The radio seems to work fine, the programming cable connected right away
> without any driver drama, and the factory software even loaded up and
> will upload and download to and from the radio, but it's otherwise
> mostly useless**.  Chirp seems to work fine as well as far as reading
> and writing to the radio, and I was able to import UV-5R files without
> any problem.  The problem I'm having is the order of the channels is
> scrambled when uploading or downloading.  I THINK it has something to do
> with the separate A and B memory banks.  I made sure I selected the "A"
> bank on the Settings screen,  but it still seems to scramble the
> channels.  Earlier today I manually entered twelve local repeaters and
> numbered them channels 1 through 12, all in Bank A, but when I
> downloaded the radio to CHIRP, the #1 channel was now #4.  I also
> deliberately didn't give any of the manually entered channels names, but
> there were channels with names scattered in with the other unnamed
> channels, apparently from Bank B.
>
> If anyone has any ideas I'd like to hear them.
>
> ** The factory software has two separate screens for Bank A and B, and
> seems to work fine moving files to and from the radio.  The problem is I
> can't see any way to enter repeater offset frequencies or -/+ values;
> apparently it's necessary to calculate and enter offsets manually.
>
> thanks
> Dave
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Dennis Wage at dwage at dwage.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190918/b8c1eabc/attachment-0002.html 


More information about the chirp_users mailing list