[chirp_users] Chirp not allowing 2.5kHz step on Wouxun KG-UV6X

[jimmcc at mccorison.com]

Somewhere in the past month or two it appears that a bug was  
introduced into Chirp for the Wouxun KG-UV6X. It is no longer  
accepting 2.50kHz step frequency programming. When importing  
frequencies into a downloaded image the 2.50kHz are dropped.  
Attempting to manual enter a frequency gives the error:

Error setting memory: Tuning step 2.5 not support
Frequency requires 2.50kHz step

I have confirmed that the VFO A/B Frequency Steps are set to 2.5. This  
occurs when importing or manually entering into downloaded images from  
the newest shipped versions of the KG-UV6X as well as older previously  
programmed radios. This behavior is still present in the most recent  
daily.

Has anybody else run into this, or can anybody else confirm the behavior.

Cheers,
Jim
K2SON