[chirp_users] UV50X2

[Darby Collier]

Exactly

On Sun, Nov 24, 2019 at 17:17 Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sun, Nov 24, 2019 at 7:25 PM Darby Collier <collier.darby at gmail.com>
> wrote:
> >
> > Jim,
> >
> > Thanks for the reply. I installed the factory image and then programmed
> with the "uploaded" file attached. I can modify the menu items now, but it
> does not take properly. Specifically, in Work Mode settings, I am
> programming 2m calling and 70c calling for A and B.
> >
> > As you can see in the "downloaded" file attached, it takes programming
> for work mode settings of C and D without issue, but keeps changing A and B
> to channel 0/N5TEN on the display, even though that is not what I am
> uploading AND it changes them both in the work mode setting to channels
> that I do not even have programmed so that doesn't even match the displayed
> channels.  I've never had issues with this or any of the other BTech stuff,
> or with CHIRP.  Thank you!!!
> >
> > -Darby
> >
>
> Darby,
>
> I don't think I understand the problem with the 2 files. Are you
> saying you uploaded the UPLOADED.img file and then with no changes to
> the radio downloaded from it and got DOWNLOADED.img?
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to DarbyInGreen at collier.darby at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20191124/68aa95b4/attachment.html