[chirp_users] Alinco DJ-G7T FW 5.1000

[Phil Freeman]

> [2019-05-16 13:46:58,944] chirp.drivers.alinco - DEBUG: PC->R: (12) 'AL~DJ-G7EG\r\n'
> [2019-05-16 13:46:58,963] chirp.drivers.alinco - DEBUG: R->PC: ( 6) '\r\nRE\r\n'
> [2019-05-16 13:46:59,967] chirp.drivers.alinco - DEBUG: PC->R: (11) 'AL~F00200R\r'
> [2019-05-16 13:47:00,238] chirp.drivers.alinco - DEBUG: R->PC: ( 6) '\r\nNG\r\n'
> [2019-05-16 13:47:00,241] chirp.ui.reporting - DEBUG: Reporting exception
> [2019-05-16 13:47:00,241] chirp.ui.common - ERROR: -- Exception: --
> [2019-05-16 13:47:00,245] chirp.ui.common - ERROR: Traceback (most recent call last):
>   File "/home/elektron/code/chirp.hg/chirp/ui/clone.py", line 256, in run
>     self.__radio.sync_in()
>   File "/home/elektron/code/chirp.hg/chirp/drivers/alinco.py", line 203, in sync_in
>     raise errors.RadioError("Failed to communicate with radio: %s" % e)
> RadioError: Failed to communicate with radio: invalid literal for int() with base 16: 'NG'

Connecting to the serial port, this seems promising:

> AL~DJ-G7EG
> RE
> AL~DJ-G7T
> OK
> AL~F%05XR
> NG
> AL~F00200R
> 64006400640064006400640064006400640064000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

no?

-- 
⛵ - 🏴☠️