[chirp_users] Kenwood TH-K40E

KBD99603
Wed May 8 19:44:46 PDT 2019


Hello,

Just realizing I should have reported this info a month ago, here's the specs of getting chirp to work with my Baofeng, not listed on the chirp website.

Sorry, for the most important part..
added it under CHIRP (port, vendor, model)

RADIO

Model:
Baofeng BF-UVB3

Power:
8W
7.4V

Freq. Range:
136-174/400-520MHZ

Battery:
3800mAh
7.4V

CHIRP

Port: /dev/ttyUSB0
Vendor: Baofeng
Model: UV-5R

Version:
daily-20190429
GTK 2.24.32
PyGTK 2.24.0
Python 2.7.16

OS:
Ubuntu 18.10
GNOME 3.30.1
64-bit

Sent from ProtonMail mobile

-------- Original Message --------
On May 8, 2019, 6:36 PM, KBD99603 wrote:

> Hello,
>
> Just realizing I should have reported this info a month ago, here's the specs of getting chirp to work with my Baofeng, not listed on the chirp website.
>
> RADIO
>
> Model:
> Baofeng BF-UVB3
>
> Power:
> 8W
> 7.4V
>
> Freq. Range:
> 136-174/400-520MHZ
>
> Battery:
> 3800mAh
> 7.4V
>
> CHIRP
>
> Version:
> daily-20190429
> GTK 2.24.32
> PyGTK 2.24.0
> Python 2.7.16
>
> OS:
> Ubuntu 18.10
> GNOME 3.30.1
> 64-bit
>
> Sent from ProtonMail mobile
>
> -------- Original Message --------
> On May 8, 2019, 10:44 AM, Dan Clemmensen wrote:
>
>> The list on the CHIRP homepage is (apparently) generated automatically from the daily CHIRP build, so if the radio is not here, then the CHIRP code does not know about it. Within the CHIRP code, there is (supposed of be) an "alias" defined for any radio that has the IDENTICAL programming interface with another radio. "identical" means completely indistinguishable, including any internal version or ID string.
>>
>> If a radio is "almost" identical, then the CHIRP code needs to be updated so it knows the differences. If the radio is truly identical, then you can program it using the original name or any of the aliases. If you think you radio might be identical and you are very brave, you can try it: please report the result here. If you think it may be a variant, please consider learning how to "sniff" the protocol, and report the result here. Please do not try any of this unless you are willing to risk temporary or permanent problems with your radio up to and including totally bricking it. (very unlikely but you must take assume the responsibility for this.)
>>
>> On Wed, May 8, 2019 at 11:33 AM Ernesto Xload <xload.es at gmail.com> wrote:
>>
>>> A lot of thanks Dan, I asked because I think that would be compatible with other Kenwood model.
>>>
>>> 73
>>>
>>> El mié., 8 may. 2019 a las 20:29, Dan Clemmensen (<danclemmensen at gmail.com>) escribió:
>>>
>>>> Please look at the CHIRP Home Page:
>>>>     https://chirp.danplanet.com/projects/chirp/wiki/Home
>>>> No, it's not supported. Also look at the FAQ (second FAQ question)
>>>>    https://chirp.danplanet.com/projects/chirp/wiki/FAQ
>>>>
>>>> On Wed, May 8, 2019 at 11:21 AM Ernesto Xload <xload.es at gmail.com> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> Is Chirp capable of programming Kenwood TH-K40E?
>>>>>
>>>>> Best Regards.
>>>>>
>>>>> Ernesto Xload
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Dan Clemmensen at danclemmensen at gmail.com
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Ernesto Xload at xload.es at gmail.com
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Dan Clemmensen at danclemmensen at gmail.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190509/98beb7e6/attachment.html 


More information about the chirp_users mailing list